Rajesh Davé

Muanpaopong, Nontawat, & Dave, Rajesh, & Bilgili, Ecevit (2023). Modeling of closed-circuit ball milling of cement clinker via a PBM with a variable Tromp curve for classification. Powder Technology/Elsevier, 427, 118737.

Kim, Sangah, & Seetahal, Ameera, & Amores, Nicholas, & Kossor, Christopher, & Dave, Rajesh (2023). Impact of Silica Dry Coprocessing with API and Blend Mixing Time on Blend Flowability and Drug Content Uniformity. Journal of Pharmaceutical Sciences, 112(8), 2124-2136.

Muanpaopong, Nnontawat, & Dave, Rajesh, & Bilgili, Ecevit (2023). A Comparative Analysis of Steel and Alumina Balls in Fine Milling of Cement Clinker via PBM and DEM. Powder Technology/Elsevier, 421, 118454.

Kim, Sangah, & Castillo, Chelsea, & Cheikhali, Mirna, & Darweesh, Hadeel, & Kossor, Christopher, & Dave, Rajesh (2023). Enhanced blend uniformity and flowability of low drug loaded fine API blends via dry coating: The effect of mixing time and excipient size. International Journal of Pharmaceutics, 635,

Dave, Rajesh, & Kim, Seonja, & Kunnath, K., & Tripathi, S. (2022). A concise treatise on model-based enhancements of cohesive powder properties via dry particle coating. Advanced Powder Technology, 33(11),

Sun, C.C., & Davé, R.N. (2022). Crystal and Particle Engineering – An Indispensable Tool for Developing and Manufacturing Quality Pharmaceutical Products. Pharmaceutical Research, 39(12), 3041-3045.

Kim, Seonja, & Cheikhali, M., & Davé, R.N. (2022). Decoding Fine API Agglomeration as a Key Indicator of Powder Flowability and Dissolution: Impact of Particle Engineering. Pharmaceutical Research, 39(12), 3079-3098.

Zheng, K., & Kunnath, K., & Davé, R.N. (2022). Discrete element method simulation of binary blend mixing of cohesive particles in a high-intensity vibration system. AIChE Journal, 68(4),

Gorkem Buyukgoz, G., & Kossor, C.G., & Ji, S., & Guvendiren, Murat, & Davé, R.N. (2022). Dose Titration of Solid Dosage Forms via FDM 3D-Printed Mini-Tablets. Pharmaceutics, 14(11),

DiStefano, T.J., & Vaso, K., & Panebianco, C.J., & Danias, G., & Chionuma, H.N., & Kunnath, K., & Karoulias, S.Z., & Wang, M., & Xu, Pan, & Davé, R.N., & Sahoo, S., & Weiser, J.R., & Iatridis, J.C. (2022). Hydrogel-Embedded Poly(Lactic-co-Glycolic Acid) Microspheres for the Delivery of hMSC-Derived Exosomes to Promote Bioactive Annulus Fibrosus Repair. Cartilage, 13(3),

Kim, S.S., & Castillo, C., & Sayedahmed, M., & Davé, R.N. (2022). Reduced Fine API Agglomeration After Dry Coating for Enhanced Blend Uniformity and Processability of Low Drug Loaded Blends. Pharmaceutical Research, 39(12), 3155-3174.

Muanpaopong, N, & Dave, Rajesh, & Bilgili, Ecevit (2022). Impact of Ball Size Distribution, Compartment Configuration, and Classifying Liner on Cement Particle Size in a Continuous Ball Mill. Minerals Engineering, 189, 107912.

Dave, Rajesh, & Kim, Sangah, & Kunnath, Kuriakose, & Tripathi, Siddharth (2022). A concise treatise on model-based enhancements of cohesive powder properties via dry particle coating. Advanced Powder Technology, 33(11),

DiStefano, Tyler, & Vaso, Keti, & Panebianco, Christopher, & Danias, George, & Chionuma, Henry, & Kunnath, Kuriakose, & Karoulias, Stylianos, & Wang, Minghui, & Xu, Peng, & Dave, Rajesh, & Sahoo, Susmita, & Weiser, Jennifer, & Iatridis, James (2022). Hydrogel-Embedded Poly(Lactic-co-Glycolic Acid) Microspheres for the Delivery of hMSC-Derived Exosomes to Promote Bioactive Annulus Fibrosus Repair. Cartilage, 13(3),

Zheng, Kai, & Kunnath, Kuriakose, & Dave, Rajesh (2022). Discrete element method simulation of binary blend mixing of cohesive particles in a high-intensity vibration system. AIChE Journal, 68(4),

Muanpaopong, N, & Dave, Rajesh, & Bilgili, Ecevit (2022). A Cell-Based PBM for Continuous Open-Circuit Dry Milling: Impact of Axial Mixing, Nonlinear Breakage, and Screen Size. Powder Technology/Elsevier, 397, 117099.

Kim, Sangah, & Cheikhali, Mirna, & Dave, Rajesh (2022). Decoding Fine API Agglomeration as a Key Indicator of Powder Flowability and Dissolution: Impact of Particle Engineering. Pharmaceutical Research,

Kim, Sangah, & Castillo, Chelsea, & Sayedahmed, Muhammad, & Dave, Rajesh (2022). Reduced Fine API Agglomeration After Dry Coating for Enhanced Blend Uniformity and Processability of Low Drug Loaded Blends. Pharmaceutical Research,

Azad, Mohammad, & Guner, Gulenay, & Afolabi, Afolawemi, & Dave, Rajesh, & Bilgili, Ecevit (2021). Impact of Solvents during Wet Stirred Media Milling of Cross-Linked Biopolymer Suspensions. Advanced Powder Technology, 32, 4562-4575.

Buyukgoz, G.G., & Kossor, C.G., & Davé, R.N. (2021). Enhanced supersaturation via fusion-assisted amorphization during fdm 3d printing of crystalline poorly soluble drug loaded filaments. Pharmaceutics, 13(11),

Kim, Seonja, & Bilgili, Ecevit, & Davé, R.N. (2021). Impact of altered hydrophobicity and reduced agglomeration on dissolution of micronized poorly water-soluble drug powders after dry coating. International Journal of Pharmaceutics, 606,

Buyukgoz, Guluzar, & Kossor, Christopher, & Dave, Rajesh (2021). Enhanced supersaturation via fusion-assisted amorphization during fdm 3d printing of crystalline poorly soluble drug loaded filaments. Pharmaceutics, 13(11),

Kim, Sangah, & Bilgili, Ecevit, & Dave, Rajesh (2021). Impact of Altered Hydrophobicity and Reduced Agglomeration on Dissolution of Micronized Poorly Water-soluble Drug Powders After Dry Coating. International Journal of Pharmaceutics , 606, p.i.: 120853 .

Li, Meng, & Furey, Casey, & Skros, Jeff, & Xu, Olivia, & Rahman, Mahbubur, & Azad, Mohammad, & Dave, Rajesh, & Bilgili, Ecevit (2021). Impact of Matrix Surface Area on Griseofulvin Release from Extrudates Prepared via Nanoextrusion. Pharmaceutics, 13(7), p.i.: 1036.

Buyukgoz, Guluzar, & Castro, Jeremiah, & Atalla, Andrew, & Pentangelo, John, & Tripathi, Siddharth, & Dave, Rajesh (2021). Impact of mixing on content uniformity of thin polymer films containing drug micro-doses. Pharmaceutics, 13(6),

Kunnath, Kuriakose, & Chen, Liang, & Zheng, Kai, & Dave, Rajesh (2021). Assessing predictability of packing porosity and bulk density enhancements after dry coating of pharmaceutical powders. Powder Technology, 377, 709-722.

Cetindag, Eylul, & Pentangelo, John, & Arrieta Cespedes, Thierry, & Dave, Rajesh (2020). Effect of solvents and cellulosic polymers on quality attributes of films loaded with a poorly water-soluble drug. Carbohydrate Polymers, 250,

Gorkem Buyukgoz, Guluzar, & Soffer, David, & Defendre, Jackenson, & Pizzano, Gia, & Dave, Rajesh (2020). Exploring tablet design options for tailoring drug release and dose via fused deposition modeling (FDM) 3D printing. International Journal of Pharmaceutics, 591,

Patki, Manali, & Vartak, Richa, & Jablonski, Joseph, & Mediouni, Sonia, & Gandhi, Tasneem, & Fu, Yige, & Cetindag, Eylul, & Dave, Rajesh, & Valente, Susana, & Patel, Ketan (2020). Efavirenz nanomicelles loaded vaginal film (EZ film) for preexposure prophylaxis (PrEP) of HIV. Colloids and Surfaces B: Biointerfaces, 194,

Chen, Liang, & He, Zizhou, & Kunnath, Kuriakose, & Zheng, Kai, & Kim, Sangah, & Dave, Rajesh (2020). Fine grade engineered microcrystalline cellulose excipients for direct compaction: Assessing suitability of different dry coating processes. European Journal of Pharmaceutical Sciences, 151,

Zheng, Kai, & Kunnath, Kuriakose, & Ling, Zhipeng, & Chen, Liang, & Dave, Rajesh (2020). Influence of guest and host particle sizes on dry coating effectiveness: When not to use high mixing intensity. Powder Technology, 366, 150-163.

Kevadiya, Bhavesh, & Chen, Liang, & Zhang, Lu, & Thomas, Midhun, & Dave, Rajesh (2019). Fenofibrate nanocrystal composite microparticles for intestine specific oral drug delivery system.. Pharmaceuticals, 12(3),

Naseri, A, & Cetindag, E, & Bilgili, Ecevit, & Dave, Rajesh (2019). A predictive transport model for convective drying of polymer strip films loaded with a BCS Class II drug. European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V, 137, 164-174.

Chen, Liang, & Fan, Siqi, & He, Zizhou, & Ding, Xiaoyi, & Kunnath, Kuriakose, & Zheng, Kai, & Dave, Rajesh (2019). Surface Engineered Excipients: III Improved Blend and Tablet Properties of Binary Mixtures Containing Cohesive Poorly-Compactable APIs. International Journal of Pharmaceutics,

Chen, Liang, & He, Zizhou, & Kunnath, Kuriakose, & Fan, Siqi, & Wei, Yuhan, & Ding, Xiaoyi, & Zheng, Kai, & Dave, Rajesh (2019). Surface engineered excipients: III. Facilitating direct compaction tableting of binary blends containing fine cohesive poorly-compactable APIs. International Journal of Pharmaceutics, 557, 354-365.

Zheng, Kai, & Lin, Zhixing, & Capece, Maxx, & Kunnath, Kuriakose, & Chen, Liang, & Dave, Rajesh (2019). Effect of Particle Size and Polymer Loading on Dissolution Behavior of Amorphous Griseofulvin Powder. Journal of Pharmaceutical Sciences,

Huang, Zhonghui, & Kunnath, Kuriakose, & Han, Xi, & Deng, Xiaoliang, & Dave, Rajesh (2018). Ultra-Fine Dispersible Powders Coated with Amino Acid L-Leucine via Two-Step Co-Milling. Advanced Powder Technology,

Azad, Mohammad, & Sievens-Figueroa, Lucas, & Dave, Rajesh (2018). Fast release of liquid antisolvent precipitated fenofibrate at high drug loading from biocompatible thin films. Advanced Powder Technology, 29(12), 2907-2919.

Huang, Zhonghui, & Kunnath, Kuriakose, & Han, Xi, & Deng, Xiaoliang, & Chen, Liang, & Dave, Rajesh (2018). Ultra-fine dispersible powders coated with L-Leucine via two-step co-milling. Advanced Powder Technology, 29(12), 2957-2965.

Li, M, & Suriel, I, & Vekaria, J, & Proske, J, & Orbe, P, & Armani, M, & Dave, Rajesh, & Bilgili, Ecevit (2018). Impact of Dispersants on Dissolution of Itraconazole from Drug-Loaded, Surfactant-Free, Spray-Dried Nanocomposites. Powder Technology/Elsevier, 339, 281-295.

Deng, Xiaoliang, & Zheng, Kai, & Dave, Rajesh (2018). Discrete Element Method Based Analysis of Mixing and Collision Dynamics in Adhesive Mixing Process. Chemical Engineering Science, 190, 220-231.

Azad, Mohammed, & Sievens-Figueroa, Lucas, & Dave, Rajesh (2018). Fast Release of Liquid Antisolvent Precipitated Fenofibrate at High Drug Loading from Biocompatible Thin Films. Advanced Powder Technology, 2907-2919.

Naseri, A.T., & Cetindag, E., & Forte, J., & Bilgili, Ecevit, & Dave, Rajesh Convective Drying Kinetics of Polymer Strip Films Loaded with a BCS Class II Drug. AAPS Pharmaceutical Science and Technology,

Zhang, Lu, & Aloia, Marie, & Pielecha-Safira, Barbara, & Lin, Honghao, & Rajai, Prarthana Manoj, & Kunnath, Kuriakose, & Dave, Rajesh (2018). Impact of Superdisintegrants and Film Thickness on Disintegration Time of Strip Films Loaded with Poorly Water-Soluble Drug Microparticles. Journal of Pharmaceutical Sciences, 107(8), 2107-2118.

Zhang, Lu, & Aloia, Marie, & Pielecha-Safira, Barbara, & Lin, Honghao, & Rajai, Prarthana, & Kunnath, Kuriakose, & Dave, Rajesh (2018). Impact of Superdisintegrants and Film Thickness on Disintegration Time of Strip Films Loaded With Poorly Water-Soluble Drug Microparticles. Journal of Pharmaceutical Sciences, 107(8), 2107-2118.

Kevadiya, Bhavesh, & Zhang, Lu, & Dave, Rajesh (2018). Sustained Release From High Poorly Water-Soluble Drug from Hydrophilic Polymeric Film Sandwiched Between Hydrophobic Layers. AAPS Pharmaceutical Science and Technology, 19(6), 2572-2584.

Kevadiya, Bhavesh, & Zhang, Lu, & Dave, Rajesh (2018). Sustained Release of Poorly Water-Soluble Drug from Hydrophilic Polymeric Film Sandwiched Between Hydrophobic Layers. AAPS PharmSciTech, 19(6), 2572-2584.

Chen, Liang, & Ding, Xiaoyi, & He, Zizhou, & Fan, Siqi, & Kunnath, Kuriakose, & Zheng, Kai, & Dave, Rajesh (2018). Surface Engineered Excipients: II Simultaneous Milling and Dry Coating for Preparation of Fine-Grade Microcrystalline Cellulose with Enhanced Properties. International Journal of Pharmaceutics, 546(1-2), 125-136.

Chen, Liang, & Ding, Xiaoyi, & He, Zizhou, & Fan, Siqi, & Kunnath, Kuriakose, & Zheng, Kai, & Dave, Rajesh (2018). Surface engineered excipients: II. Simultaneous milling and dry coating for preparation of fine-grade microcrystalline cellulose with enhanced properties. International Journal of Pharmaceutics, 546(1-2), 125-136.

Bhakay, A, & Rahman, M, & Dave, Rajesh, & Bilgili, Ecevit (2018). Bioavailability Enhancement of Poorly Water-Soluble Drugs via Nanocomposites: Formulation⁻Processing Aspects and Challenges.. Pharmaceutics, 10(3),

Kunnath, Kuriakose, & Huang, Zhonghui, & Chen, Liang, & Zheng, Kai, & Dave, Rajesh (2018). Improved properties of fine active pharmaceutical ingredient powder blends and tablets at high drug loading via dry particle coating. International Journal of Pharmaceutics, 543(1-2), 288-299.

Kunnath, Kuriakose, & Huang, Zhonghui, & Chen, Liang, & Zheng, Kai, & Dave, Rajesh (2018). Improved Properties of Fine Active Pharmaceutical Ingredient Powder Blends and Tablets at High Drug Loading via Dry Particle Coating. International Journal of Pharmaceutics, 543(1-2), 288-299.

Zhang, Lu, & Alfano, Joy, & Race, Doran, & Dave, Rajesh (2018). Zero-Order Release of Poorly Water-Soluable Drug from Polymeric Films Made via Aqueous Slurry Casting. European Journal of Pharmaceutical Sciences, 117, 245-254.

Zhang, Lu, & Alfano, Joy, & Race, Doran, & Dave, Rajesh (2018). Zero-order release of poorly water-soluble drug from polymeric films made via aqueous slurry casting. European Journal of Pharmaceutical Sciences, 117, 245-254.

Bhakay, A., & Dave, Rajesh, & Bilgili, Ecevit (2018). Quiescent and Agitated Redispersion as a Tool for Evaluating Dispersant Effectiveness in Dissolution Enhancement of Drug-Laden Nanocomposites. AAPS PharmSciTech, 19(1), 436–447.

Azad, Mohammed, & Moreno, Jacqueline, & Dave, Rajesh (2018). Stable and Fast-Dissolving Amorphous Drug Composites Preparation via Impregnantion of Neusilin UFL2. Journal of Pharmaceutical Sciences, 107(1), 107-182.

Chen, Liang, & Ding, Xiaoyi, & He, Zizhou, & Huang, Zhonghui, & Kunnath, Kuriakose, & Zheng, Kai, & Dave, Rajesh (2018). Surface engineered excipients: I. improved functional properties of fine grade microcrystalline cellulose. International Journal of Pharmaceutics, 536(1), 127-137.

Chen, Liang, & Ding, Xiaoyi, & He, Zizhou, & Huang, Zhonghui, & Kunnath, Kuriakose, & Zheng, Kai, & Dave, Rajesh (2018). Surface Engineered Excipients: I. Improved Functional Properties of Fine Grade Microcrystalline Cellulose. International Journal of Pharmaceutics, 536(1), 127-137.

Zhang, Lu, & Li, Yidong, & Abed, Manal, & Dave, Rajesh (2018). Incorporation of Surface-Modified Dry Micronized Poorly Water-Soluble Drug Powders Into Polymer Strip Films. International Journal of Pharmaceutics, 535, 462-472.

Zhang, Lu, & Li, Yidong, & Abed, Manal, & Dave, Rajesh (2018). Incorporation of surface-modified dry micronized poorly water-soluble drug powders into polymer strip films. International Journal of Pharmaceutics, 535(1-2), 462-472.

Capece, M, & Dave, Rajesh, & Bilgili, Ecevit (2018). A pseudo-coupled DEM–non-linear PBM approach for simulating the evolution of particle size during dry milling. Powder Technology/Elsevier, 323, 374-384.

Azad, Mohammad, & Moreno, Jacqueline, & Dave, Rajesh (2018). Stable and Fast-Dissolving Amorphous Drug Composites Preparation via Impregnation of Neusilin^® UFL2. Journal of Pharmaceutical Sciences, 107(1), 170-182.

Bhakay, A., & Davé, R.N., & Bilgili, Ecevit (2017). Quiescent and Agitated Redispersion as a Tool for Evaluating Dispersant Effectiveness in Dissolution Enhancement of Drug-Laden Nanocomposites. AAPS PharmSciTech, 1-12.

Huang, Z., & Xiong, W., & Kunnath, K., & Bhaumik, S., & Davé, R.N. (2017). Improving blend content uniformity via dry particle coating of micronized drug powders. European Journal of Pharmaceutical Sciences, 104, 344-355.

Deng, X., & Davé, R.N. (2017). Adhesion and friction of dry-coated nano-rough particles. Powder Technology, 314, 20-27.

Capece, M., & Huang, Z., & Dave, Rajesh (2017). Insight Into a Novel Strategy for the Design of Tablet Formulations Intended for Direct Compression. Journal of Pharmaceutical Sciences, 106(6), 1608-1617.

Ying, Y., & Beck, C., & Wu, A., & Dave, Rajesh, & Iqbal, Z. (2017). Polymorph formation in fenofibrate in the absence and presence of polymer stabilizers: a low wavenumber Raman and differential scanning calorimetry study. Journal of Raman Spectroscopy, 48(5), 750-757.

Krull, S.M., & Moreno, J., & Li, Meng, & Bilgili, Ecevit, & Davé, R.N. (2017). Critical material attributes (CMAs) of strip films loaded with poorly water-soluble drug nanoparticles: III. Impact of drug nanoparticle loading. International Journal of Pharmaceutics, 523(1), 33-41.

Deng, X., & Davé, R.N. (2017). Properties of force networks in jammed granular media. Granular Matter, 19(2),

Deng, X., & Davé, R.N. (2017). Breakage of fractal agglomerates. Chemical Engineering Science, 161, 117-126.

Krull, S.M., & Ammirata, J., & Bawa, S., & Li, Meng, & Bilgili, Ecevit, & Davé, R.N. (2017). Critical Material Attributes of Strip Films Loaded With Poorly Water-Soluble Drug Nanoparticles: II. Impact of Polymer Molecular Weight. Journal of Pharmaceutical Sciences, 106(2), 619-628.

Azad, M, & Moreno, J, & Bilgili, Ecevit, & Dave, Rajesh (2016). Fast dissolution of poorly water soluble drugs from fluidized bed coated nanocomposites: Impact of carrier size.. International journal of pharmaceutics, 513(1-2), 319-331.

Krull, S, & Patel, H, & Li , M, & Bilgili, Ecevit, & Dave, Rajesh (2016). Critical material attributes (CMAs) of strip films loaded with poorly water-soluble drug nanoparticles: I. Impact of plasticizer on film properties and dissolution.. European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences, 92, 146-55.

Deng, X., & Huang, Z., & Wang, W., & Davé, R.N. (2016). Investigation of nanoparticle agglomerates properties using Monte Carlo simulations. Advanced Powder Technology, 27(5), 1971-1979.

Li , M, & Azad, M, & Dave, Rajesh, & Bilgili, Ecevit (2016). Nanomilling of Drugs for Bioavailability Enhancement: A Holistic Formulation-Process Perspective.. Pharmaceutics, 8(2), 1-35.

Li , M, & Zhang, L, & Dave, Rajesh, & Bilgili, Ecevit (2016). An Intensified Vibratory Milling Process for Enhancing the Breakage Kinetics during the Preparation of Drug Nanosuspensions.. AAPS Pharmaceutical Science and Technology, 17(2), 389–399.

Bhakay, Anagha, & Vizzotti, Emanuel, & Li, Meng, & Dave, Rajesh, & Bilgili, Ecevit (2016). Incorporation of Fenofibrate Nanoparticles Prepared by Melt Emulsification into Polymeric Films. Journal of Pharmaceutical Innovation, 11(1), 53-63.

To, D., & Davé, R.N. (2016). Fluid bed film coating of fine ibuprofen particles. Powder Technology, 290, 102-113.

Krull, S, & Ma, Z, & Li , M, & Dave, Rajesh, & Bilgili, Ecevit (2016). Preparation and characterization of fast dissolving pullulan films containing BCS class II drug nanoparticles for bioavailability enhancement.. Drug development and industrial pharmacy, 42(7), 1073-85.

Susarla, Ramana, & Afolabi, Afolawemi, & Patel, Darshan, & Bilgili, Ecevit, & Dave, Rajesh (2015). Novel use of superdisintegrants as viscosity enhancing agents in biocompatible polymer films containing griseofulvin nanoparticles . Powder Technology , 285, 25 - 33.

Azad, Mohammad, & Arteaga, Colby, & Abdelmalek, Beshoy, & Dave, Rajesh, & Bilgili, Ecevit (2015). Spray Drying of Drug–Swellable Dispersant Suspensions for Preparation of Fast-Dissolving, High Drug-Loaded, Surfactant-Free Nanocomposites. Drug Development and Industrial Pharmacy/Taylor & Francis , 41(10), 1617-1631.

Azad, M, & Afolabi, A, & Bhakay, A, & Leonardi, J, & Dave, Rajesh, & Bilgili, Ecevit (2015). Enhanced physical stabilization of fenofibrate nanosuspensions via wet co-milling with a superdisintegrant and an adsorbing polymer.. European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V, 94, 372-85.

Jallo, L.J., & Dave, Rajesh (2015). Explaining Electrostatic Charging and Flow of Surface-Modified Acetaminophen Powders as a Function of Relative Humidity Through Surface Energetics. Journal of Pharmaceutical Sciences, 104(7), 2225-2232.

Li, Meng, & Yaragudi, Naveen, & Afolabi, Afolawemi, & Dave, Rajesh, & Bilgili, Ecevit (2015). Sub-100 nm drug particle suspensions prepared via wet milling with low bead contamination through novel process intensification. Chemical Engineering Science/Elsevier, 130, 207-220.

Li, M., & Yaragudi, N., & Afolabi, A., & Dave, Rajesh, & Bilgili, Ecevit (2015). Sub-100nm drug particle suspensions prepared via wet milling with low bead contamination through novel process intensification. Chemical Engineering Science, 130, 207-220.

Krull, S, & Susarla, R, & Afolabi, A, & Li , M, & Ying, Y, & Iqbal, Z, & Bilgili, Ecevit, & Dave, Rajesh (2015). Polymer strip films as a robust, surfactant-free platform for delivery of BCS Class II drug nanoparticles.. International journal of pharmaceutics, 489(1-2), 45-57.

Capece, M., & Barrows, J., & Dave, Rajesh (2015). Controlled Release from Drug Microparticles via Solventless Dry-Polymer Coating. Journal of Pharmaceutical Sciences, 104(4), 1340-1351.

Capece, M., & Dave, Rajesh (2015). Enhanced physical stability of amorphous drug formulations via dry polymer coating. Journal of Pharmaceutical Sciences, 104(6), 2076-2084.

Krull, Scott, & Li, Meng, & Bilgili, Ecevit, & Dave, Rajesh (2015). Polymer Strip Films for Delivery of Poorly Water-Soluble Drugs. American Pharmaceutical Review/CompareNetworks Inc., 18(3), 48-52.

Capece, Maxx, & Dave, Rajesh, & Bilgili, Ecevit (2015). On the origin of non-linear breakage kinetics in dry milling. Powder Technology/Elsevier, 272 , 189–203.

Deng, Xiaoliang, & Scicolone, James, & Han, Xi , & Dave, Rajesh (2015). Discrete Element Method Simulation of a Conical Screen mill: A Continuous Dry Coating Device. Chemical Engineering Science, 17.

Huang, Zhonghui, & Scicolone, James, & Gurumurty, Lakxmi, & Dave, Rajesh (2015). Flow and Bulk Density Enhancements of Pharmaceutical Powders using a Conical Screen Mill: A Continuous Dry Coating Device. Chemical Engineering Science, 125, 209-224.

Huang, Z., & Scicolone, J.V., & Han, X., & Dave, Rajesh (2015). Improved blend and tablet properties of fine pharmaceutical powders via dry particle coating. International Journal of Pharmaceutics, 478(2), 447-455.

Knieke, Catharina, & Azad, Mohammad, & To, Daniel, & Bilgili, Ecevit, & Dave, Rajesh (2015). Sub-100 micron fast dissolving nanocomposite drug powders. Powder Technology/Elsevier, 271 , 49–60.

Zhang, Jun, & Ying, Ye, & Pielecha-Safirab, Barbara , & Bilgili, Ecevit, & Ramachandran, Rohit, & Romañache, Rodolfo Romañache,, & Dave, Rajesh, & iqbal, zafar (2014). Raman Spectroscopy for In-line and Off-line Quantification of Poorly Soluble Drugs in Strip Films. International Journal of Pharmaceutics/Elsevier, 475(1-2), 428-437.

Bhakay, A, & Azad, M, & Vizzotti, E, & Dave, Rajesh, & Bilgili, Ecevit (2014). Enhanced recovery and dissolution of griseofulvin nanoparticles from surfactant-free nanocomposite microparticles incorporating wet-milled swellable dispersants.. Drug development and industrial pharmacy, 40(11), 1509-22.

Capece, M., & Bilgili, Ecevit, & Dave, Rajesh (2014). Insight into first-order breakage kinetics using a particle-scale breakage rate constant. Chemical Engineering Science, 117, 318-330.

Capece, M., & Huang, Z., & To, D., & Aloia, M., & Muchira, C., & Dave, Rajesh, & Yu, A.B. (2014). Prediction of porosity from particle scale interactions: Surface modification of fine cohesive powders. Powder Technology, 254, 103-113.

Azad, Mohammad, & Arteaga, Colby, & Abdelmalek, Beshoy, & Dave, Rajesh, & Bilgili, Ecevit Spray Drying of Drug–Swellable Dispersant Suspensions for Preparation of Fast-Dissolving, High Drug-Loaded, Surfactant-Free Nanocomposites. Drug Development and Industrial Pharmacy/Informa PLC,

Capece, Maxx, & Bilgili, Ecevit, & Dave, Rajesh (2014). Formulation of a physically motivated specific breakage rate parameter for ball milling via the discrete element method. AIChE Journal/Wiley, 60(7), 2404–2415.

Capece, M., & Dave, Rajesh (2014). Solventless polymer coating of microparticles. Powder Technology, 261, 118-132.

capece, maxx, & Bilgili, Ecevit, & Dave, Rajesh (2014). Insight into First-order Breakage Kinetics for Dry Ball Milling Using a Physically Based Breakage Rate Parameter. Chemical Engineering Science/Elsevier, 117, 318-330.

Huang, Z., & Scicolone, J.V., & Gurumuthy, L., & Davé, R. N. (2014). Flow and bulk density enhancements of pharmaceutical powders using a conical screen mill: A continuous dry coating device. Chemical Engineering Science,

Knieke, C., & Rawtani, A., & Davé, R. N. (2014). Concentrated fenofibrate nanoparticle suspensions from melt emulsification for enhanced drug dissolution. Chemical Engineering and Technology, 37(1), 157-167.

Bhakay, Anagha, & Azad, Mohammad, & Bilgili, Ecevit, & Dave, Rajesh (2013). Redispersible Fast Dissolving Nanocomposite Microparticles of Poorly Water-Soluble Drugs. International Journal of Pharmaceutics/Elsevier, 461(1-2), 367–379.

Azad, Mohammad, & Knieke, Catharina, & To, Daniel, & Dave, Rajesh (2013). Preparation of Concentrated Stable Fenofibrate Suspensions via Liquid Antisolvent Precipitation. Drug Development and Industrial Pharmacy, In press(doi:10.3109/03639045.2013.842580), 11.

Susarla, R, & Sievens-Figueroa, L, & Bhakay, A, & Shen, Y, & Jerez-Rozo, J, & Engen, W, & Khusid, Boris, & Bilgili, Ecevit, & Romañach, R, & Morris, K, & Michniak-Kohn, B, & Dave, Rajesh (2013). Fast drying of biocompatible polymer films loaded with poorly water-soluble drug nano-particles via low temperature forced convection.. International journal of pharmaceutics, 455(1-2), 93-103.

Azad, Mohammad, & Afolabi, Afolawemi, & Patel, Nikita, & Dave, Rajesh, & Bilgili, Ecevit (2013). Preparation of stable colloidal suspensions of superdisintegrants via wet stirred media milling. Particuology/Elsevier, 14, DOI: 10.1016/j.partic.2013.07.008.

Bhakay, Anagha, & Azad, Mohammad, & Vizzotti, Emanuel, & Dave, Rajesh, & Bilgili, Ecevit (2013). Enhanced Recovery and Dissolution of Griseofulvin Nanoparticles from Surfactant-Free Nanocomposite Microparticles Incorporating Wet-Milled Swellable Dispersants. Drug Development and Industrial Pharmacy/Informa PLC, 40, DOI: 10.3109/03639045.2013.831442.

Susarla, Ramana, & Sievens-Figueroa, Lucas, & Bhakaya, Anagha, & Shen, Yueyang, & Jerez-Rozo, Jackeline, & Engen, William, & Khusid, Boris, & Bilgili, Ecevit, & Romanach, Rodolfo, & Morris, Kenneth, & Michniak-Kohn, Bozena, & Dave, Rajesh (2013). Fast drying of biocompatible polymer films loaded with poorlywater-soluble drug nano-particles via low temperature forcedconvection. International Journal of Pharmaceutics, 455(1-2), 93–103.

Knieke, Catharina, & Azad, Mohammad, & Dave, Rajesh, & Bilgili, Ecevit (2013). A Study of the Physical Stability of Wet Media-Milled Fenofibrate Suspensions Using Dynamic Equilibrium Curves. Chemical Engineering Research and Design/Elsevier, 91(7), 1245–1258.

capece, maxx, & Dave, Rajesh, & Bilgili, Ecevit (2013). Influence of Non-Linear Breakage Kinetics on the Attainment of Self-Similarity for Dry Milling Processes. Chemical Engineering Science/Elsevier, 97, 96-107.

Bhakay, Anagha, & Dave, Rajesh, & Bilgili, Ecevit (2013). Recovery of BCS Class II drugs during aqueous redispersion of core–shell type nanocomposite particles produced via fluidized bed coating. Powder Technology/Elsevier, 236, 221-234.

Patel, Rajen, & Liu, Jinwen, & Scicolone, James, & Roy, Sagar, & Mitra, Somenath, & Dave, Rajesh, & Iqbal, Zafer (2012). Formation of Stainless Steel-Carbon Nanotube Composites using a Scalable Chemical Infiltration Process. J. of Matl. Sci,

Jallo, Laila, & Ghoroi, Chinmay, & Gurumurthy, Lakxmi , & Patel, Utsav, & Dave, Rajesh (2012). Improvement of flow and bulk density of pharmaceutical powders using surface modification. International Journal of Pharmaceutics, 423, 213– 225.

Sievens-Figueroa, Lucas, & Bhakay, Anagha, & Jerez-Rozo, Jackeline , & Pandya, Natasha, & Romanach, Rodolfo, & Michniak-Kohn, Bozena , & Iqbal, Zafar, & Bilgili, Ecevit, & Dave, Rajesh (2012). Preparation and characterization of hydroxypropyl methyl cellulose films containing stable BCS Class II drug nanoparticles for pharmaceutical applications. International Journal of Pharmaceutics/Elsevier, 423(2), 496-508.

Balachandran, Dave, & Jallo, Laila, & Dave, Rajesh, & Beaudoin, Stephen (2012). Adhesion of Dry Nano-Coated Particles to Stainless Steel: A Physical Interpretation. Powder Technology, 226(1-9),

Banerjee, Amit, & Dave, Rajesh (2012). Robust Clustering. Wiley Interdisciplinary Reviews: Data Mining and Knowledge Discovery, 2(1), 29-59.

capece, maxx, & Bilgili, Ecevit, & Dave, Rajesh (2011). Emergence of falsified kinetics as a consequence of multi-particle interactions in dense-phase comminution processes . Chemical Engineering Science/Elsevier, 66(22), 5672-5683.

Bhakay, Anagha, & Merwade, Maneesh, & Bilgili, Ecevit, & Dave, Rajesh (2011). Novel Aspects of Wet Milling for the Production of Microsuspensions and Nanosuspensions of Poorly Water-Soluble Drugs. Drug Development and Industrial Pharmacy/Informa PLC, 37(8), 963-976.

Capece, Maxx, & Bilgili, Ecevit, & Dave, Rajesh (2011). Identification of the Breakage Rate and Distribution Parameters in a Non-linear Population Balance Model for Batch Milling. Powder Technology/Elsevier, 208(1), 195-204.

Jallo, Laila, & Chen, Yuhua, & Bowen, James, & Etzler, Frank, & Dave, Rajesh (2011). Prediction of Inter-particle Adhesion Force from Surface Energy and Surface Roughness . Journal of Adhesion Science and Technolog, 25(4-5), 367-384.

Jallo, Laila, & Schoenitz, Mirko, & Dreyzin, Edward, & Dave, Rajesh, & Johnson, Curtis (2010). The effect of surface modification of aluminum powder on its flowability, combustion and reactivity.. Powder Technology , 204(1), 63-70.

Beach, Lauren, & Ropero, Jorge, & Mujumdar, Ajit, & Alcalà, Manel, & Romañach, Rodolfo, & Dave, Rajesh (2010). Near-Infrared Spectroscopy for the In-Line Characterization of Powder Voiding Part II: Quantification of Enhanced Flow Properties of Surface Modified Active Pharmaceutical Ingredients . Journal of Pharmaceutical Innovation, 5(1-2), 1-13.

Jallo, Laila, & Schoenitz, Mirko, & Dreyzin, Edward, & Dave, Rajesh, & Johnson, Curtis (2010). The effect of surface modification of aluminum powder on its flowability, combustion and reactivity.. Powder Technology , 204(1), 63-70.

Chen, Yuhua, & Jallo, Laila, & Quintanilla, Miguel , & Dave, Rajesh (2010). Characterization of particle and bulk level cohesion reduction of surface modified fine aluminum powders . Colloids and Surfaces A: Physicochemical and Engineering Aspects, 361(1-3), 66-80.

Beck, Christian, & Dalvi, Sameer, & Dave, Rajesh (2010). Controlled liquid antisolvent precipitation using a rapid mixing device. Chemical Engineering Science, 65(21), 5669-5675.

Dalvi, Sameer, & Dave, Rajesh (2010). Analysis of nucleation kinetics of poorly water-soluble drugs in presence of ultrasound and hydroxypropyl methyl cellulose during antisolvent precipitation . International Journal of Pharmaceutics, 387(1-2), 172-179 .

Lepek, Daniel, & Valverde, Jose , & Pfeffer, Robert, & Dave, Rajesh (2010). Enhanced nanofluidization by alternating electric fields. AIChE Journal, 56(1), 54-65.

Ropero, Jorge , & Beach, Lauren , & Alcalà, Manel , & Rentas, Raizza , & Dave, Rajesh, & Romañach, Rodolfo (2009). Near-infrared Spectroscopy for the In-line Characterization of Powder Voiding Part I: Development of the Methodology . Journal of Pharmaceutical Innovation, 4(4), 187-197.

Zhang, Qi , & Yang, Jun , & Teng, Shuli , & Dave, Rajesh, & Zhu, Linjie , & Wang, Peng , & Young, Ming-Wan , & Gogos, Costas (2009). In-situ, simultaneous milling and coating of particulates with nanoparticles . Powder Technology, 196(3), 292-297.

To, Daniel, & Dave, Rajesh, & Yin, Xiaolong , & Sundaresan, Sankaran (2009). Deagglomeration of Nanoparticle Aggregates via Rapid Expansion of Supercritical or High-Pressure Suspensions. AIChE Journal, 55(11), 2807–2826.

Kimmel, Howard, & Hirsch, Linda, & Simon, Laurent, & Burr-Alexander, Levelle, & Dave, Rajesh (2009). Implementing Concepts of Pharmaceutical Engineering into High School Science Classrooms. Chemical Engineering Education, 43(3), 187-193.

Dreyzin, Edward, & Dave, Rajesh, & Schoenitz, Mirko, & Jiang, Xianquin, & Trunov, M (2009). Mechanical alloying and reactive milling in a high energy planetary mill. Journal of Alloys and Compounds , 478, 246-251.

Dalvi, Sameer , & Dave, Rajesh (2009). Controlling Particle Size of a Poorly Water-Soluble Drug Using Ultrasound and Stabilizers in Antisolvent Precipitation. Industrial and Engineering Chemistry Research, 48(16), pp 7581–7593.

Ward, Trent, & Chen, Wenliang, & Schoenitz, Mirko, & Dave, Rajesh, & Dreizin, Edward (2005). A study of mechanical alloying processes using reactive milling and discrete element modeling. Acta Materialia, 53(10), 2909–2918.

Ward, Trent, & Chen, Wenliang, & Schoenitz, Mirko, & Dreizin, E, & Dave, Rajesh (2004). Nano-composite energetic powders prepared by arrested reactive milling. & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리,

Dave, Rajesh, & Rosato, Anthony, & Fischer, Ian (1999). Non-Intrusive Particle Tracking System for Particulate Flows and Vibrated Granular Beds. Particulate Science and Technology, 17(1-2), 125-139.

Dave, Rajesh, & Fischer, Ian, & Rosato, Anthony, & Luke, Jonathan, & Pfeffer, Robert, & Rosato, Anthony (1998). Particle Technology Concentration at NJIT: An NSF-CRCD Program. Chem. Eng. Education , 32, 102-107.

Labous, Laurent, & Rosato, Anthony, & Dave, Rajesh (1997). Measurement of Sphere Collision Properties. Physical Review E, 56(5), 5717 - 5725.

Vanel, Loic, & Rosato, Anthony, & Dave, Rajesh (1997). Rise Regimes of a Single Large Sphere in a Vibrated Bed. Physical Review Letters, 78(7), 1225-1228.

Dave, Rajesh, & Rosato, Anthony, & Bhaswan, Kurra (1995). Fractal Characterization of Clustered Microstructure in Uniform Shear Flows of Smooth, Inelastic Particles. Mechanics Research Communications / Elsevier, 22(4), 335-342 .

Effects of stabilizers on particle redispersion and dissolution from polymer strip films containing liquid antisolvent precipitated griseofulvin particles
Powder Technology, 2013

Fluidization and mixing of nanoparticle agglomerates assisted via magnetic impaction
Journal of Nanoparticle Research, 2013

Formation of stainless steel-carbon nanotube composites using a scalable chemical vapor infiltration process
Journal of Materials Science, 2013

Influence of non-linear breakage kinetics on the attainment of self-similarity for dry milling processes
Chemical Engineering Science, 2013

Investigating the applicability of inverse gas chromatography to binary powdered systems: An application of surface heterogeneity profiles to understanding preferential probe-surface interactions
International Journal of Pharmaceutics, 2013

Multi-faceted characterization of pharmaceutical powders to discern the influence of surface modification
Powder Technology, 2013

Polymorph stabilization in processed acetaminophen powders
Powder Technology, 2013

Precipitation and stabilization of ultrafine particles of Fenofibrate in aqueous suspensions by RESOLV
Powder Technology, 2013

Recovery of BCS Class II drugs during aqueous redispersion of core-shell type nanocomposite particles produced via fluidized bed coating
Powder Technology, 2013

A study of the physical stability of wet media-milled fenofibrate suspensions using dynamic equilibrium curves
Chemical Engineering Research and Design, September 2013

Passivation of high-surface-energy sites of milled ibuprofen crystals via dry coating for reduced cohesion and improved flowability
Journal of Pharmaceutical Sciences, September 2013

Special issue on pharmaceutical powders: Towards developing understanding of the influence of materials and processes on product performance
Powder Technology, January (1st Quarter/Winter) 2013

Robust clustering
Wiley Interdisciplinary Reviews: Data Mining and Knowledge Discovery, 2012

Using USP i and USP IV for discriminating dissolution rates of nano- and microparticle-loaded pharmaceutical strip-films
AAPS PharmSciTech, 2012

A Rational Function Approximation to the Effectiveness Factor for Multi-Particle Interactions in Dense-Phase Dry Milling
Powder Technology, November 2012