Mohamad Saadeghvaziri
Mohamad Saadeghvaziri
Professor, Civil & Environmental Engineering
260 Colton Hall (COLT)
Education
Ph.D.; University of Illinois at Urbana-Champaign; Civil Engineering; 1988
M.S.; University of Illinois at Urbana-Champaign; Civil Engineering; 1983
B.S.; University of Illinois at Urbana-Champaign; Civil Engineering; 1981
M.S.; University of Illinois at Urbana-Champaign; Civil Engineering; 1983
B.S.; University of Illinois at Urbana-Champaign; Civil Engineering; 1981
2025 Spring Courses
CE 490 - CIVIL ENGR PROJECTS
CE 491 - RESEARCH EXPER-CIVIL ENGR
CE 701C - MASTER'S THESIS
CE 727 - INDEPENDENT RESEARCH III
CE 790A - DOCT DISSERTATION & RES
CE 726 - INDEPENDENT STUDY II
CE 701B - MASTER'S THESIS
CE 725 - INDEPENDENT STUDY I
MECH 320 - STATICS & MECH OF MATERL
CE 700B - MASTERS PROJECT
CE 332 - STRUCTURAL ANALYSIS
CE 792 - PRE-DOCTORAL DISSERTATION
CE 491 - RESEARCH EXPER-CIVIL ENGR
CE 701C - MASTER'S THESIS
CE 727 - INDEPENDENT RESEARCH III
CE 790A - DOCT DISSERTATION & RES
CE 726 - INDEPENDENT STUDY II
CE 701B - MASTER'S THESIS
CE 725 - INDEPENDENT STUDY I
MECH 320 - STATICS & MECH OF MATERL
CE 700B - MASTERS PROJECT
CE 332 - STRUCTURAL ANALYSIS
CE 792 - PRE-DOCTORAL DISSERTATION
Past Courses
CE 332: STRUCTURAL ANALYSIS
CE 333: REINFORCED CONCRETE DES
CE 333: REINFORCED CONCRETE DESIGN
CE 432: STRUCTURAL STEEL DESIGN
CE 495: CIVIL ENGR DESIGN II
CE 634: STRUCTURAL DYNAMICS
CE 737: EARTHQUAKE ENGINEERING
MECH 234: ENGINEERING MECHANICS
MECH 234: ENGINEERING MECHANICS - HONORS
MECH 235: STATICS
MECH 237: STRENGTH OF MATERIALS
CE 333: REINFORCED CONCRETE DES
CE 333: REINFORCED CONCRETE DESIGN
CE 432: STRUCTURAL STEEL DESIGN
CE 495: CIVIL ENGR DESIGN II
CE 634: STRUCTURAL DYNAMICS
CE 737: EARTHQUAKE ENGINEERING
MECH 234: ENGINEERING MECHANICS
MECH 234: ENGINEERING MECHANICS - HONORS
MECH 235: STATICS
MECH 237: STRENGTH OF MATERIALS
Conference Proceeding
“Bridge Dynamic Response Due to Truck Load Sequence”
The 6th International Conference on Bridge Maintenance, Safety and Management ,
“Applications of Drones in Infrastructures: Challenges and Opportunities”
2019.
“Dynamic Response and Serviceability Considerations of Bridges under Moving Load”
Univ. of Tehran, May 2011.
“Seismic Properties of Confined Recycled Aggregate Concrete”
American Univ. in Dubai, February 2011.
“Parameter Study and Finite Element Analysis of a Multi-Hazard Protective Jacket for Structural Members”
ASCE,
The 6th International Conference on Bridge Maintenance, Safety and Management ,
“Applications of Drones in Infrastructures: Challenges and Opportunities”
2019.
“Dynamic Response and Serviceability Considerations of Bridges under Moving Load”
Univ. of Tehran, May 2011.
“Seismic Properties of Confined Recycled Aggregate Concrete”
American Univ. in Dubai, February 2011.
“Parameter Study and Finite Element Analysis of a Multi-Hazard Protective Jacket for Structural Members”
ASCE,
SHOW MORE
“Towards Structural Applications of Recycled Concrete Aggregate”
ASCE,
“On Multi-hazard Considerations in Design of Structures”
Earthquake Engineering Research Institute, July (3rd Quarter/Summer) 2010.
“Shear Transfer Mechanism in Slab-on-Girder Bridges”
IABMAS10, July (3rd Quarter/Summer) 2010.
“Towards a more Rational Serviceability Considerations for High Performance Steel Bridges”
IABMAS10, July (3rd Quarter/Summer) 2010.
“A Multi-hazard Protective Jacket for Structural Members”
ASCE, May 2010.
“Controlled Composite Action (C2A) to Eliminate Deck Cracking”
ASCE, May 2010.
“Serviceability Considerations of High Performance Steel Bridges”
ASCE, May 2010.
“On Effectiveness of Water in Attenuating Impact and Blast Loads”
ICCES, March 2010.
“Progress on the 1.6-meter new solar telescope at big bear solar observatory”
October (4th Quarter/Autumn) 2006.
ASCE,
“On Multi-hazard Considerations in Design of Structures”
Earthquake Engineering Research Institute, July (3rd Quarter/Summer) 2010.
“Shear Transfer Mechanism in Slab-on-Girder Bridges”
IABMAS10, July (3rd Quarter/Summer) 2010.
“Towards a more Rational Serviceability Considerations for High Performance Steel Bridges”
IABMAS10, July (3rd Quarter/Summer) 2010.
“A Multi-hazard Protective Jacket for Structural Members”
ASCE, May 2010.
“Controlled Composite Action (C2A) to Eliminate Deck Cracking”
ASCE, May 2010.
“Serviceability Considerations of High Performance Steel Bridges”
ASCE, May 2010.
“On Effectiveness of Water in Attenuating Impact and Blast Loads”
ICCES, March 2010.
“Progress on the 1.6-meter new solar telescope at big bear solar observatory”
October (4th Quarter/Autumn) 2006.
COLLAPSE
Journal Article
Mohamad A. Saadeghvaziri. 2017. “A Statistical Approach to Investigate the Effectiveness of Mass/Stiffness Eccentricity in Mitigation of Seismic Structural Vibration.” Journal of Engineering Structures.
Mohamad A. Saadeghvaziri. 2014. “New energy based approach to predict seismic demands of steel moment resisting frames subjected to near-fault ground motions.” Engineering Structures / Elsevier , vol. 27, pp. 182-192.
Bakhtiar Feizi, . 2014. “Optimal Design of Eccentricity for Seismic Applications.” Engineering Structures / Elsevier, vol. 59, pp. 646-653.
Mohamad A. Saadeghvaziri. 2010. “On Seismic Response of Substation Equipment and Application of Base-Isolation to Transformers.” IEEE Transactions on Power Delivery, vol. 25, no. 1, pp. 177-184.
Mohamad A. Saadeghvaziri. 2014. “New energy based approach to predict seismic demands of steel moment resisting frames subjected to near-fault ground motions.” Engineering Structures / Elsevier , vol. 27, pp. 182-192.
Bakhtiar Feizi, . 2014. “Optimal Design of Eccentricity for Seismic Applications.” Engineering Structures / Elsevier, vol. 59, pp. 646-653.
Mohamad A. Saadeghvaziri. 2010. “On Seismic Response of Substation Equipment and Application of Base-Isolation to Transformers.” IEEE Transactions on Power Delivery, vol. 25, no. 1, pp. 177-184.
Technical Report
“ProJack B4 – Protective Jacket to Blunt Blasts on Bridges and Buildings”
NJIT, April (2nd Quarter/Spring) 2010.
NJIT, April (2nd Quarter/Spring) 2010.