Przemyslaw Musialski
Przemyslaw Musialski
Associate Professor, Computer Science
4407 Guttenberg Information Technologies Center (GITC)
About Me
Przemyslaw Musialski is an Associate Professor of Computer Science at New Jersey Institute of Technology, NJ, USA. His research interests are geometric design, computer graphics, digital fabrication, and machine learning. He develops new algorithmic solutions that help designers create better products directly on the computer, averting the need to manufacture preliminary prototypes.
Before joining NJIT, he headed the Computational Fabrication group at the Center for Geometry and Computational Design (GCD) at Vienna University of Technology (TU Wien) in Austria, where he also was an assistant professor at the Institute of Discrete Mathematics and Geometry. Prior to that, he was a researcher at VRVis Research Center in Vienna, a postdoctoral scholar at Arizona State University, a postdoctoral associate at TU Wien, and a visiting research scientist at KAUST (King Abdullah University of Science and Technology). He obtained the MSc degree in Media Sciences in 2007 from the Bauhaus University Weimar in Germany and the PhD degree in Computer Science in 2010 from the TU Wien in Austria.
Before joining NJIT, he headed the Computational Fabrication group at the Center for Geometry and Computational Design (GCD) at Vienna University of Technology (TU Wien) in Austria, where he also was an assistant professor at the Institute of Discrete Mathematics and Geometry. Prior to that, he was a researcher at VRVis Research Center in Vienna, a postdoctoral scholar at Arizona State University, a postdoctoral associate at TU Wien, and a visiting research scientist at KAUST (King Abdullah University of Science and Technology). He obtained the MSc degree in Media Sciences in 2007 from the Bauhaus University Weimar in Germany and the PhD degree in Computer Science in 2010 from the TU Wien in Austria.
Education
Ph.D.; Vienna University of Technology; Computer Science; 2010
M.S.; Bauhaus University Weimar; Media Sciences; 2007
M.S.; Bauhaus University Weimar; Media Sciences; 2007
Website
2025 Spring Courses
CS 726 - INDEPENDENT STUDY II
CS 790A - DOCT DISSERTATION & RES
CS 792 - PRE-DOCTORAL RESEARCH
CS 700B - MASTER'S PROJECT
CS 488 - INDEPENDENT STUDY IN CS
CS 701B - MASTER'S THESIS
CS 725 - INDEPENDENT STUDY I
CS 790A - DOCT DISSERTATION & RES
CS 792 - PRE-DOCTORAL RESEARCH
CS 700B - MASTER'S PROJECT
CS 488 - INDEPENDENT STUDY IN CS
CS 701B - MASTER'S THESIS
CS 725 - INDEPENDENT STUDY I
Past Courses
CS 438: INTERACTIVE COMPUTER GRAPHICS
CS 438: PROG INTACTV CMP GRAPHCS
CS 675: MACHINE LEARNING
CS 786: SEL TOP IN COM INF SCI II
DS 675: MACHINE LEARNING
CS 438: PROG INTACTV CMP GRAPHCS
CS 675: MACHINE LEARNING
CS 786: SEL TOP IN COM INF SCI II
DS 675: MACHINE LEARNING
Research Interests
His research interests are geometric design, computer graphics, digital fabrication, and machine learning. He develops new algorithmic solutions that help designers create better products directly on the computer, averting the need to manufacture preliminary prototypes.
Conference Paper
“Animated Ink Bleeding with Computational Fluid Dynamics”
ACM SIGGRAPH 2024 Posters, July (3rd Quarter/Summer) 2024.
“Neuro-Symbolic Transformation of Architectural Facades into Their Procedural Representations”
ACM SIGGRAPH 2024 Posters, July (3rd Quarter/Summer) 2024.
“Layout Enhancer: Generating Good Indoor Layouts from Imperfect Data”
ACM SIGGRAPH Asia 2022 Conference Papers, November 2022.
“Design and Fabrication of Elastic Geodesic Grid Structures”
ACM Symposium on Computational Fabrication, October (4th Quarter/Autumn) 2020.
“Reduced-Order Simulation of Flexible Meta-Materials”
ACM Symposium on Computational Fabrication, October (4th Quarter/Autumn) 2020.
ACM SIGGRAPH 2024 Posters, July (3rd Quarter/Summer) 2024.
“Neuro-Symbolic Transformation of Architectural Facades into Their Procedural Representations”
ACM SIGGRAPH 2024 Posters, July (3rd Quarter/Summer) 2024.
“Layout Enhancer: Generating Good Indoor Layouts from Imperfect Data”
ACM SIGGRAPH Asia 2022 Conference Papers, November 2022.
“Design and Fabrication of Elastic Geodesic Grid Structures”
ACM Symposium on Computational Fabrication, October (4th Quarter/Autumn) 2020.
“Reduced-Order Simulation of Flexible Meta-Materials”
ACM Symposium on Computational Fabrication, October (4th Quarter/Autumn) 2020.
SHOW MORE
Journal Article
Stefan Pillwein, Przemyslaw Musialski. 2021. “Generalized Deployable Elastic Geodesic Grids.” ACM Transactions on Graphics (Proc. SIGGRAPH Asia 2021), vol. 40, no. 6, pp. 271:1--271:15.
Kurt Leimer, Przemyslaw Musialski. 2021. “Analysis of a reduced-order model for the simulation of elastic geometric zigzag-spring meta-materials.” Computers & Graphics.
Stefan Pillwein, Johanna Kübert, Florian Rist, Przemyslaw Musialski. 2021. “Design and fabrication of multi-patch elastic geodesic grid structures.” Computers & Graphics, vol. 98, pp. 218--230.
Stefan Pillwein, Kurt Leimer, Michael Birsak, Przemyslaw Musialski. 2020. “On Elastic Geodesic Grids and Their Planar to Spatial Deployment.” ACM Transactions on Graphics (Proc. SIGGRAPH 2020), vol. 39, no. 4, pp. 125:1--125:12.
Kurt Leimer, Andreas Winkler, Stefan Ohrhallinger, Przemyslaw Musialski. 2020. “Pose to Seat: Automated Design of Body-Supporting Surfaces.” Computer Aided Geometric Design, vol. 79, no. 101855.
Kurt Leimer, Przemyslaw Musialski. 2021. “Analysis of a reduced-order model for the simulation of elastic geometric zigzag-spring meta-materials.” Computers & Graphics.
Stefan Pillwein, Johanna Kübert, Florian Rist, Przemyslaw Musialski. 2021. “Design and fabrication of multi-patch elastic geodesic grid structures.” Computers & Graphics, vol. 98, pp. 218--230.
Stefan Pillwein, Kurt Leimer, Michael Birsak, Przemyslaw Musialski. 2020. “On Elastic Geodesic Grids and Their Planar to Spatial Deployment.” ACM Transactions on Graphics (Proc. SIGGRAPH 2020), vol. 39, no. 4, pp. 125:1--125:12.
Kurt Leimer, Andreas Winkler, Stefan Ohrhallinger, Przemyslaw Musialski. 2020. “Pose to Seat: Automated Design of Body-Supporting Surfaces.” Computer Aided Geometric Design, vol. 79, no. 101855.
SHOW MORE
Professional
Computer Graphics Forum (CGF) by Eurographics Association and John Wiley & Sons Ltd.
Member, Editorial/Advisory Board for Journal/Book Series (ongoing), 2021
EUROGRAPHICS 2025 - IPC for Technical Papers
Committee Member, 2024
Elsevier Computer Aided Design Journal
Peer Reviewer, Journal, 2024
Elsevier Expert Systems With Applications Journal
Peer Reviewer, Journal, 2024
ACM SIGGRAPH Asia 2024 Technical Papers
Reviewer, Conference Paper, 2024
Member, Editorial/Advisory Board for Journal/Book Series (ongoing), 2021
EUROGRAPHICS 2025 - IPC for Technical Papers
Committee Member, 2024
Elsevier Computer Aided Design Journal
Peer Reviewer, Journal, 2024
Elsevier Expert Systems With Applications Journal
Peer Reviewer, Journal, 2024
ACM SIGGRAPH Asia 2024 Technical Papers
Reviewer, Conference Paper, 2024
SHOW MORE