Edward Dreyzin
Edward Dreyzin
(Dreizin) Distinguished Professor, Chemical & Materials Engineering
Associate Chair for Graduate Studies
Associate Chair for Graduate Studies
York Center (YORK)
About Me
Prof. Dreizin received his MS and PhD degrees from Odessa University, Ukraine in 1985 and 1992, respectively. In the US, he worked as a research scientist at AeroChem Research Labs at Princeton, NJ from 1993 to 1999. He joined NJIT faculty in 1999.
Education
Ph.D.; Odessa University; ; 1992
M.S.; Odessa University; ; 1985
B.S.; Odessa College of Measurements; ; 1980
M.S.; Odessa University; ; 1985
B.S.; Odessa College of Measurements; ; 1980
2025 Spring Courses
CHE 705 - INDEPENDENT STUDY I
MTEN 725 - INDEPENDENT STUDY I
CHE 700B - MASTERS PROJECT
MTEN 492 - RESRCH AND INDPENDENT STUDY II
CHE 701C - MASTERS THESIS
MTEN 790A - DOCT DISSERTATION & RES
PHEN 701B - MASTER'S THESIS
CHE 611 - THERMODYNAMICS
CHE 790A - DOCT DISSERTATION & RES
CHE 491 - RESEARCH & INDEP STUDY
CHE 492 - RESEARCH & INDEP STUDY
CHE 701B - MASTERS THESIS
MTEN 700B - MASTER'S PROJECT
CHE 792 - PRE-DOCTORAL RESEARCH
PHEN 701C - MASTER'S THESIS
MTEN 491 - RESEARCH & INDEPENDENT STUDY I
MTEN 701B - MASTERS THESIS
MTEN 792 - PRE-DOCTORAL RESEARCH
CHE 706 - INDEPENDENT STUDY II
MTEN 726 - INDEPENDENT STUDY II
MTEN 725 - INDEPENDENT STUDY I
CHE 700B - MASTERS PROJECT
MTEN 492 - RESRCH AND INDPENDENT STUDY II
CHE 701C - MASTERS THESIS
MTEN 790A - DOCT DISSERTATION & RES
PHEN 701B - MASTER'S THESIS
CHE 611 - THERMODYNAMICS
CHE 790A - DOCT DISSERTATION & RES
CHE 491 - RESEARCH & INDEP STUDY
CHE 492 - RESEARCH & INDEP STUDY
CHE 701B - MASTERS THESIS
MTEN 700B - MASTER'S PROJECT
CHE 792 - PRE-DOCTORAL RESEARCH
PHEN 701C - MASTER'S THESIS
MTEN 491 - RESEARCH & INDEPENDENT STUDY I
MTEN 701B - MASTERS THESIS
MTEN 792 - PRE-DOCTORAL RESEARCH
CHE 706 - INDEPENDENT STUDY II
MTEN 726 - INDEPENDENT STUDY II
Teaching Interests
Heat and Mass Transfer, Thermodynamics, Combustion
Past Courses
CHE 370: HEAT AND MASS TRANSFER
CHE 611: THERMODYNAMICS
CHE 702: REACTIVE NANOMATERIALS
CHE 702: ST:
CHE 702: ST:METAL COMBUSTION
CHE 721: COMBUSTION REACTION ENGINEERING
CHE 721: COMBUSTION REACTION ENGR
CHE 791: GRADUATE SEMINAR
CHE 611: THERMODYNAMICS
CHE 702: REACTIVE NANOMATERIALS
CHE 702: ST:
CHE 702: ST:METAL COMBUSTION
CHE 721: COMBUSTION REACTION ENGINEERING
CHE 721: COMBUSTION REACTION ENGR
CHE 791: GRADUATE SEMINAR
Research Interests
Reactive materials and metal combustion, mechanical alloying, mechanochemistry
Journal Article
Elif Irem Senyurt, Seyed Mahmoud Arzideh, David C. Venerus, Gennady Gor, Mirko Schoenitz, Edward L. Dreyzin. 2024. “Viscosity and density of organophosphorus liquids and their aqueous solutions.” Journal of Molecular Liquids, vol. 399, pp. 124476.
Siva Kumar Valluri, Edward L. Dreyzin, Dana Dlott. 2023. “Accelerating shock-driven reactions in metal nanocomposites.” Bulletin of the American Physical Society.
Purvam Mehulkumar Gandhi, Jonathan McNanna, Mirko Schoenitz, Edward L. Dreyzin. 2023. “Effect of morphology of boron-potassium nitrate composite powders on their ignition and combustion.” Combustion and Flame, vol. 255, pp. 112882.
Purvam M Gandhi, Mirko Schoenitz, Edward L. Dreyzin. 2023. “Evaluation and design of metal-based gas-generating energetic materials.” Combustion and Flame, vol. 249, pp. 112615.
Siva Kumar Valluri, Lawrence Salvati, Edward L. Dreyzin, Dana D Dlott. 2023. “Fast reactions of shocked energetic microporous metallic composites.” Propellants, Explosives, Pyrotechnics.
Siva Kumar Valluri, Edward L. Dreyzin, Dana Dlott. 2023. “Accelerating shock-driven reactions in metal nanocomposites.” Bulletin of the American Physical Society.
Purvam Mehulkumar Gandhi, Jonathan McNanna, Mirko Schoenitz, Edward L. Dreyzin. 2023. “Effect of morphology of boron-potassium nitrate composite powders on their ignition and combustion.” Combustion and Flame, vol. 255, pp. 112882.
Purvam M Gandhi, Mirko Schoenitz, Edward L. Dreyzin. 2023. “Evaluation and design of metal-based gas-generating energetic materials.” Combustion and Flame, vol. 249, pp. 112615.
Siva Kumar Valluri, Lawrence Salvati, Edward L. Dreyzin, Dana D Dlott. 2023. “Fast reactions of shocked energetic microporous metallic composites.” Propellants, Explosives, Pyrotechnics.
SHOW MORE
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2023. “Ignition mechanisms of reactive nanocomposite powders combining Al, B, and Si as fuels with metal fluorides as oxidizers.” Combustion Science and Technology, vol. 195, no. 3, pp. 597--618.
Mirko Schoenitz, Kerri Lee Chintersingh, Edward L. Dreyzin. 2023. “Process-property correlations for spherical composite Al\textperiodcentered Ti powders prepared by emulsion-assisted milling.” Powder Technology, vol. 428, pp. 118806.
Shomik Mukhopadhyay, Khushi Patel, Mirko Schoenitz, Edward L. Dreyzin. 2023. “Removal of powders from cavities in contaminated surfaces by shock and plasma generated by an adjacent electro-static discharge.” Powder Technology, vol. 420, pp. 118407.
Ella V Ivanova, Ashvinkumar Vasudevan, Elif Irem Senyurt, Mirko Schoenitz, Alexei Khalizov, Edward L. Dreyzin, Gennady Gor. 2023. “Surface Tension of Organophosphorus Compounds: Sarin and its Surrogates.” Langmuir, vol. 39, no. 15, pp. 5569--5578.
House Andrew, Anna Kuna, Daniel Hastings, Nikki Rodriguez, Mirko Schoenitz, Edward L. Dreyzin, Murat Guvendiren. 2023. “Effect of particle shape on rheology and printability of highly filled reactive inks for direct ink writing.” Progress in Additive Manufacturing.
Elif Irem Senyurt, Edward L. Dreyzin. 2022. “At what ambient temperature can thermal runaway of a burning metal particle occur?.” Combustion and Flame, vol. 236, pp. 111800.
Hicham Jabraoui, Alain Esteve, Mirko Schoenitz, Edward L. Dreyzin, Carole Rossi. 2022. “Atomic scale insights into the first reaction stages prior to Al/CuO nanothermite ignition: influence of porosity.” ACS applied materials \& interfaces, vol. 14, no. 25, pp. 29451--29461.
Purvam Mehulkumar Gandhi, Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Effect of organic liquid process control agents on properties of ball-milled powders.” Advanced Powder Technology, vol. 33, no. 1, pp. 103332.
Mehnaz Mursalat, Holly McCann, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Effect of particle morphology on characteristics of pressed aluminum-boron reactive powders.” Journal of Energetic Materials, pp. 1--13.
Mehnaz Mursalat, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Effect of particle morphology on reactivity, ignition and combustion of boron powders.” Fuel, vol. 324, pp. 124538.
Shomik Mukhopadhyay, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Effect of reactive B--Ti powder morphology on its removal from a surface and ignition by electro-static discharge.” Journal of Electrostatics, vol. 120, pp. 103766.
Siva Kumar Valluri, Dana Dlott, Edward L. Dreyzin. 2022. “Exploring the Use of Aluminized Composites as Additives in Traditional Explosives.” Bulletin of the American Physical Society, vol. 67.
Siva Kumar Valluri, Dana Dlott, Edward L. Dreyzin. 2022. “Porosity: The Key to Initiating Metallic Composite Particles under Shock Compression.” Bulletin of the American Physical Society, vol. 67.
Mehnaz Mursalat, Agata Skura, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Potential one-pot synthesis of spherical magnesium silicate powder by mechanical milling.” Powder Technology, vol. 404, pp. 117458.
Ashvin Vasudevan, Elif Irem Senyurt, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Removal of diisopropyl methyl phosphonate (DIMP) from heated metal oxide surfaces.” Journal of Hazardous Materials, pp. 130154.
Daniel Hastings, Nikki Rodriguez, Holly McCann, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Titanium-boron reactive composite powders with variable morphology prepared by arrested reactive milling.” Fuel, vol. 310, pp. 122313.
Siva Kumar Valluri, Purvam Mehulkumar Gandhi, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Boron-Rich Composite Thermite Powders with Binary Bi2O3\textperiodcentered CuO Oxidizers.” Energy \& Fuels.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Combustion of Composites of Boron with Bismuth and Cobalt Fluorides in Different Environments.” Combustion Science and Technology, vol. 193, no. 8, pp. 1343--1358.
Ashvin Vasudevan, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Effect of metal nitrate on mechanochemical nitration of toluene.” Reaction Chemistry \& Engineering.
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Effect of Purity, Surface Modification and Iron Coating on Ignition and Combustion of Boron in Air.” Combustion Science and Technology, vol. 193, no. 9, pp. 1567--1586.
Sergey Matveev, Dana D Dlott, Siva Kumar Valluri, Mehnaz Mursalat, Edward L. Dreyzin. 2021. “Fast energy release from reactive materials under shock compression.” Applied Physics Letters, vol. 118, no. 10, pp. 101902.
Daniel Hastings, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Highly reactive spheroidal milled aluminum.” Materialia, vol. 15, pp. 100959.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Ignition Mechanisms of Reactive Nanocomposite Powders Combining Al, B, and Si as Fuels with Metal Fluorides as Oxidizers.” Combustion Science and Technology, pp. 1--22.
Ci Huang, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Ignition of zirconium powders placed near an electrostatic discharge.” Combustion and Flame, vol. 226, pp. 1--13.
Xinhang Liu, Adam Sims, Chris Murzyn, Nick G Glumac, Edward L. Dreyzin. 2021. “Iodine Release by Combustion of Composite Mg∙ Ca (IO3) 2 Powder.” Combustion Science and Technology, vol. 193, no. 6, pp. 1042--1054.
Mehnaz Mursalat, Ci Huang, Baptiste Julien, Mirko Schoenitz, Est\`eve, Alain, Carole Rossi, Edward L. Dreyzin. 2021. “Low-Temperature Exothermic Reactions in Al/CuO Nanothermites Producing Copper Nanodots and Accelerating Combustion.” ACS Applied Nano Materials, vol. 4, no. 4, pp. 3811--3820.
Ashvin Vasudevan, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Parameters affecting mechanochemical nitration of aromatic precursors.” Chemical Engineering Science, vol. 246, pp. 116906.
Elif Irem Senyurt, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Rapid destruction of sarin surrogates by gas phase reactions with focus on diisopropyl methylphosphonate (DIMP).” Defence Technology, vol. 17, no. 3, pp. 703--714.
Mehnaz Mursalat, Mirko Schoenitz, Edward L. Dreyzin, Neveu, Aur\'elien, Filip Francqui. 2021. “Spherical boron powders prepared by mechanical milling in immiscible liquids.” Powder Technology, vol. 388, pp. 41--50.
Akhil V Marayikkottu, Saurabh S Sawant, Deborah A Levin, Ci Huang, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Study of particle lifting mechanisms in an electrostatic discharge plasma.” International Journal of Multiphase Flow, vol. 137, pp. 103564.
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Transition metal catalysts for boron combustion.” Combustion Science and Technology, vol. 193, no. 8, pp. 1400--1424.
Shomik Mukhopadhyay, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Vapor-phase decomposition of dimethyl methylphosphonate (DMMP), a sarin surrogate, in presence of metal oxides.” Defence Technology, vol. 17, no. 4, pp. 1095--1114.
Siva Kumar Valluri, Mirko Schoenitz, Edward Dreizin. 2020. “Bismuth fluoride-coated boron powders as enhanced fuels.” Combustion and Flame, vol. 221, pp. 1--10.
Mehnaz Mursalat, Mirko Schoenitz, Edward L Dreizin. 2020. “Custom particle morphology in energetic nanocomposites prepared by arrested reactive milling in immiscible liquids.” Powder Technology, vol. 359, pp. 238--246.
Siva Kumar Valluri, Karthick Kumarasen Ravi, Mirko Schoenitz, Edward L Dreizin. 2020. “Effect of boron content in B\textperiodcentered BiF3 and B\textperiodcentered Bi composites on their ignition and combustion.” Combustion and Flame, vol. 215, pp. 78--85.
Mehnaz Mursalat, Mirko Schoenitz, Edward L Dreizin. 2020. “Effect of premilling Al and CuO in acetonitrile on properties of Al\textperiodcentered CuO thermites prepared by arrested reactive milling.” Combustion and Flame, vol. 214, pp. 57--64.
Ashvin Kumar Vasudevan, Mirko Schoenitz, Edward L Dreizin. 2020. “Mechanochemical nitration of toluene with metal oxide catalysts.” Applied Catalysis A: General, pp. 117604.
Mehnaz Mursalat, Daniel L Hastings, Mirko Schoenitz, Edward L Dreizin. 2020. “Microspheres with Diverse Material Compositions Can be Prepared by Mechanical Milling.” Advanced Engineering Materials, vol. 22, no. 3, pp. 1901204.
Yalun Sun, Hui Ren, Qingjie Jiao, Mirko Schoenitz, Edward L Dreizin. 2020. “Oxidation, ignition and combustion behaviors of differently prepared boron-magnesium composites.” Combustion and Flame, vol. 221, pp. 11--19.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2020. “Preparation and characterization of silicon-metal fluoride reactive composites.” Nanomaterials, vol. 10, no. 12, pp. 2367.
DL Hastings, Mirko Schoenitz, Kaleigh M Ryan, Edward L Dreizin, Joseph W Krumpfer. 2020. “Stability and Ignition of a Siloxane-Coated Magnesium Powder.” Propellants, Explosives, Pyrotechnics, vol. 45, no. 4, pp. 621--627.
Shomik Mukhopadhyay, Mirko Schoenitz, Edward L Dreizin. 2020. “Vapor-phase decomposition of dimethyl methylphosphonate (DMMP), a sarin surrogate, in presence of metal oxides.” Defence Technology.
Daniel Hastings, Mirko Schoenitz, Edward L Dreizin. 2020. “Zirconium-boron reactive composite powders prepared by arrested reactive milling.” Journal of Energetic Materials, vol. 38, no. 2, pp. 142--161.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Boron doped with iron: Preparation and combustion in air.” Combustion and Flame, vol. 200, pp. 286--295.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Boron-Metal Fluoride Reactive Composites: Preparation and Reactions Leading to Their Ignition.” Journal of Propulsion and Power, vol. 35, no. 4, pp. 802--810.
I Monk, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Combustion of a rapidly initiated fully dense nanocomposite Al--CuO thermite powder.” Combustion Theory and Modelling, pp. 1--23.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Combustion of Aluminum-metal Fluoride Reactive Composites in Different Environments.” Propellants, Explosives, Pyrotechnics.
Mehnaz Mursalat, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Composite Al∙ Ti powders prepared by high-energy milling with different process controls agents.” Advanced Powder Technology, vol. 30, no. 7, pp. 1319--1328.
Ci Huang, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Displacement of powders from surface by shock and plasma generated by electrostatic discharge.” Journal of Electrostatics, vol. 100, pp. 103353.
Edward L Dreizin. 2019. “Effect of liquid process control agent on structure and morphology of reactive materials prepared by high-energy milling.” Bulletin of the American Physical Society, vol. 64.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L Dreizin. 2019. “Effect of Purity, Surface Modification and Iron Coating on Ignition and Combustion of Boron in Air.” Combustion Science and Technology, pp. 1--20.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Fluorine-containing oxidizers for metal fuels in energetic formulations.” Defence Technology, vol. 15, no. 1, pp. 1--22.
Siva K Valluri, Daniela Bushiri, Mirko Schoenitz, Edward Dreizin. 2019. “Fuel-rich aluminum--nickel fluoride reactive composites.” Combustion and Flame, vol. 210, pp. 439--453.
Kerri-Lee Chintersingh, Yalun Sun, Mirko Schoenitz, Edward L Dreizin. 2019. “Heterogeneous reaction kinetics for oxidation and combustion of boron.” Thermochimica Acta, vol. 682, pp. 178415.
Xinhang Liu, Adam Sims, Chris Murzyn, Nick G Glumac, Edward L Dreizin. 2019. “Iodine Release by Combustion of Composite Mg∙ Ca (IO3) 2 Powder.” Combustion Science and Technology, pp. 1--13.
Xinhang Liu, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Preparation, ignition, and combustion of magnesium-calcium iodate reactive nano-composite powders.” Chemical Engineering Journal, vol. 359, pp. 955--962.
Yalun Sun, Kerri-Lee L Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Reactive Shell Model For Boron Oxidation.” The Journal of Physical Chemistry C.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L Dreizin. 2019. “Transition Metal Catalysts for Boron Combustion.” Combustion Science and Technology, pp. 1--25.
Kerri Lee Chintersingh, Yalun Sun, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Heterogeneous reaction kinetics for oxidation and combustion of boron.” Thermochimica Acta, vol. 682.
Yalun Sun, Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Reactive Shell Model for Boron Oxidation.” Journal of Physical Chemistry C, vol. 123, no. 18, pp. 11807-11813.
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Boron doped with iron: Preparation and combustion in air.” Combustion and Flame, vol. 200, pp. 286-295.
Song Wang, Mirko Schoenitz, Sergey A Grinshpun, Michael Yermakov, Edward L Dreizin. 2018. “Biocidal effectiveness of combustion products of iodine-bearing reactive materials against aerosolized bacterial spores.” Journal of Aerosol Science, vol. 116, pp. 106--115.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L Dreizin. 2018. “Combustion of boron and boron--iron composite particles in different oxidizers.” Combustion and Flame, vol. 192, pp. 44--58.
Ian Monk, Mirko Schoenitz, Edward L. Dreyzin. 2018. “Combustion of Magnesium-Sulfur Composite Particles Ignited by Different Stimuli.” Propellants, Explosives, Pyrotechnics, vol. 43, no. 11, pp. 1178--1183.
Xinhang Liu, Mirko Schoenitz, Edward L Dreizin. 2018. “Combustion of Mg and composite Mg\textperiodcentered S powders in different oxidizers.” Combustion and Flame.
Oleg S Lagoviyer, Mirko Schoenitz, Edward L Dreizin. 2018. “Effect of milling temperature on structure and reactivity of Al--Ni composites.” Journal of Materials Science, vol. 53, no. 2, pp. 1178--1190.
Oleg S Lagoviyer, Mirko Schoenitz, Edward L. Dreyzin. 2018. “Effect of process parameters on mechanochemical nitration of toluene.” Journal of materials science, vol. 53, no. 19, pp. 13690--13700.
Siva Kumar Valluri, Mirko Schoenitz, Edward Dreizin. 2018. “Fluorine-containing oxidizers for metal fuels in energetic formulations.” Defence Technology.
Daniel L Hastings, Mirko Schoenitz, Edward L Dreizin. 2018. “High density reactive composite powders.” Journal of Alloys and Compounds, vol. 735, pp. 1863--1870.
Worrawit Nakpan, Sergey A Grinshpun, Michael Yermakov, Reshmi Indugula, Tiina Reponen, Song Wang, Mirko Schoenitz, Edward L Dreizin. 2018. “Inactivation of aerosolized surrogates of Bacillus anthracis spores by combustion products of aluminum-and magnesium-based reactive materials: Effect of exposure time.” Aerosol Science and Technology, vol. 52, no. 5, pp. 579--587.
Oleg S Lagoviyer, Larisa Krishtopa, Mirko Schoenitz, Nirupam J Trivedi, Edward L Dreizin. 2018. “Mechanochemical nitration of aromatic compounds.” Journal of Energetic Materials, vol. 36, no. 2, pp. 191--201.
Quang Nguyen, Ci Huang, Mirko Schoenitz, Kyle T Sullivan, Edward L Dreizin. 2018. “Nanocomposite thermite powders with improved flowability prepared by mechanical milling.” Powder Technology, vol. 327, pp. 368--380.
Daniel L Hastings, Edward L Dreizin. 2018. “Reactive structural materials: Preparation and characterization.” Advanced Engineering Materials, vol. 20, no. 3, pp. 1700631.
Edward Dreizin, Oleg Shlomo Lagoviyer, Mirko Schoenitz. 2018. “SERDP Project WP-2748.” .
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2018. “Combustion of boron and boron–iron composite particles in different oxidizers.” Combustion and Flame, vol. 192, pp. 44-58.
Xuan Liu, Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2018. “Reactive composite boron - Magnesium powders prepared by mechanical milling.” Journal of Propulsion and Power, vol. 34, no. 3, pp. 787-794.
Sergey A Grinshpun, Michael Yermakov, Reshmi Indugula, Ani Abraham, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Aluminum-based materials for inactivation of aerosolized spores of Bacillus anthracis surrogates.” Aerosol Science and Technology, vol. 51, no. 2, pp. 224–234.
Xinhang Liu, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Boron-based reactive materials with high concentrations of iodine as a biocidal additive.” Chemical Engineering Journal, vol. 325, pp. 495–501.
I Monk, M Schoenitz, RJ Jacob, Edward L. Dreyzin, MR Zachariah. 2017. “Combustion characteristics of stoichiometric Al-CuO nanocomposite thermites prepared by different methods.” Combustion Science and Technology, vol. 189, no. 3, pp. 555–574.
Song Wang, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Combustion of boron and boron-containing reactive composites in laminar and turbulent air flows.” Combustion Science and Technology, vol. 189, no. 4, pp. 683–697.
Xinhang Liu, John Gonzales, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Effect of purity and surface modification on stability and oxidation kinetics of boron powders.” Thermochimica Acta, vol. 652, pp. 17–23.
Siva Kumar Valluri, Ian Monk, Mirko Schoenitz, Edward L Dreizin. 2017. “FUEL-RICH ALUMINUM- METAL FLUORIDE THERMITES.” International Journal of Energetic Materials and Chemical Propulsion, vol. 16, no. 1.
Edward L. Dreyzin, Mirko Schoenitz. 2017. “Mechanochemically prepared reactive and energetic materials: a review.” Journal of Materials Science, pp. 1–21.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Metal-rich aluminum–polytetrafluoroethylene reactive composite powders prepared by mechanical milling at different temperatures.” Journal of Materials Science, vol. 52, no. 12, pp. 7452–7465.
I Monk, M Schoenitz, Edward L. Dreyzin. 2017. “Modes of ignition of powder layers of nanocomposite thermites by electrostatic discharge.” Journal of Energetic Materials, vol. 35, no. 1, pp. 29–43.
Song Wang, Xinhang Liu, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Nanocomposite Thermites with Calcium Iodate Oxidizer.” Propellants, Explosives, Pyrotechnics, vol. 42, no. 3, pp. 284–292.
X Liu, K-L Chintersingh, Mirko Schoenitz, EL Dreizin. 2017. “Reactive Composite Boron--Magnesium Powders Prepared by Mechanical Milling.” Journal of Propulsion and Power, vol. 34, no. 3, pp. 787--794.
Ian Monk, Mirko Schoenitz, Edward L. Dreyzin. 2017. “The effect of heating rate on combustion of fully dense nanocomposite thermite particles.” Combustion Science and Technology, no. just-accepted.
Ani Abraham, Hongqi Nie, Mirko Schoenitz, Alexander B Vorozhtsov, Marat Lerner, Alexander Pervikov, Nikolay Rodkevich, Edward L. Dreyzin. 2016. “Bimetal Al–Ni nano-powders for energetic formulations.” Combustion and Flame, vol. 173, pp. 179–186.
Kerri-Lee Chintersingh, Quang Nguyen, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Combustion of boron particles in products of an air–acetylene flame.” Combustion and Flame, vol. 172, pp. 194–205.
Sergio E Guerrero, Edward L. Dreyzin, Evgeny Shafirovich. 2016. “Combustion of thermite mixtures based on mechanically alloyed aluminum–iodine material.” Combustion and Flame, vol. 164, pp. 164–166.
Song Wang, Salil Mohan, Edward L. Dreyzin. 2016. “Effect of flow conditions on burn rates of metal particles.” Combustion and Flame, vol. 168, pp. 10–19.
Ani Abraham, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Energy storage materials with oxide-encapsulated inclusions of low melting metal.” Acta Materialia, vol. 107, pp. 254–260.
Song Wang, Ani Abraham, Ziyue Zhong, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Ignition and combustion of boron-based Al B I 2 and Mg B I 2 composites.” Chemical Engineering Journal, vol. 293, pp. 112–117.
Hongqi Nie, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Initial stages of oxidation of aluminum powder in oxygen.” Journal of Thermal Analysis and Calorimetry, pp. 1–13.
Song Wang, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Mechanically alloyed magnesium–boron–iodine composite powders.” Journal of Materials Science, vol. 51, no. 7, pp. 3585–3591.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Oxidation kinetics and combustion of boron particles with modified surface.” Combustion and Flame, vol. 173, pp. 288–295.
Hongqi Nie, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Oxidation of differently prepared Al-Mg alloy powders in oxygen.” Journal of Alloys and Compounds, vol. 685, pp. 402–410.
Hongqi Nie, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Oxidation of magnesium: implication for aging and ignition.” The Journal of Physical Chemistry C, vol. 120, no. 2, pp. 974–983.
AB Vorozhtsov, M Lerner, N Rodkevich, H Nie, A Abraham, M Schoenitz, Edward L. Dreyzin. 2016. “Oxidation of nano-sized aluminum powders.” Thermochimica Acta, vol. 636, pp. 48–56.
Ani Abraham, Ziyue Zhong, Ruodong Liu, Sergey A Grinshpun, Michael Yermakov, Reshmi Indugula, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Preparation, Ignition, and Combustion of Mg S Reactive Nanocomposites.” Combustion Science and Technology, no. just-accepted.
Jose Guadarrama, Edward L. Dreyzin, Nick Glumac. 2016. “Reactive Liners Prepared Using Powders of Aluminum and Aluminum-Magnesium Alloys.” Propellants, Explosives, Pyrotechnics.
Ani Abraham, Natalia A MacDonald, Edward L. Dreyzin. 2016. “Reactive Materials for Evaporating Samarium.” Propellants, Explosives, Pyrotechnics.
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Oxidation kinetics and combustion of boron particles with modified surface.” Combustion and Flame, vol. 173, pp. 288-295.
Kerri Lee Chintersingh, Quang Nguyen, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Combustion of boron particles in products of an air–acetylene flame.” Combustion and Flame, vol. 172, pp. 194-205.
Marco A Machado, Daniel A Rodriguez, Edward L Dreizin, Evgeny Shafirovich. 2015. “Chemical Gas Generators Based on Mechanically Alloyed Al Mg Powder.” MRS Proceedings, vol. 1758, pp. mrsf14–1758.
Ani Abraham, Nicholas W Piekiel, Christopher J Morris, Edward L Dreizin. 2015. “Combustion of Energetic Porous Silicon Composites Containing Different Oxidizers.” Propellants, Explosives, Pyrotechnics.
Song Wang, Amy L Corcoran, Edward L Dreizin. 2015. “Combustion of magnesium powders in products of an air/acetylene flame.” Combustion and Flame, vol. 162, no. 4, pp. 1316–1325.
Danielle Quijano, Amy L Corcoran, Edward L Dreizin. 2015. “Combustion of Mechanically Alloyed Aluminum-Magnesium Powders in Steam.” Propellants, Explosives, Pyrotechnics, vol. 40, no. 5, pp. 749–754.
Amy L Corcoran, Song Wang, Yasmine Aly, Edward L Dreizin. 2015. “Combustion of Mechanically Alloyed Al∙ Mg Powders in Products of a Hydrocarbon Flame.” Combustion Science and Technology, vol. 187, no. 5, pp. 807–825.
Edward L Dreizin, Mirko Schoenitz. 2015. “Correlating ignition mechanisms of aluminum-based reactive materials with thermoanalytical measurements.” Progress in Energy and Combustion Science, vol. 50, pp. 81–105.
EL Dreizin, DJ Allen, NG Glumac. 2015. “Depression of melting point for protective aluminum oxide films.” Chemical Physics Letters, vol. 618, pp. 63–65.
Ani Abraham, John Obamedo, Mirko Schoenitz, Edward L Dreizin. 2015. “Effect of composition on properties of reactive Al B I 2 powders prepared by mechanical milling.” Journal of Physics and Chemistry of Solids, vol. 83, pp. 1–7.
Ian Monk, Rayon Williams, Xinhang Liu, Edward L Dreizin. 2015. “Electro-static discharge ignition of monolayers of nanocomposite thermite powders prepared by arrested reactive milling.” Combustion Science and Technology, vol. 187, no. 8, pp. 1276–1294.
Daniel A Rodriguez, Edward L Dreizin, Evgeny Shafirovich. 2015. “Hydrogen generation from ammonia borane and water through combustion reactions with mechanically alloyed Al Mg powder.” Combustion and Flame, vol. 162, no. 4, pp. 1498–1506.
Yasmine Aly, Edward L Dreizin. 2015. “Ignition and combustion of Al Mg alloy powders prepared by different techniques.” Combustion and Flame, vol. 162, no. 4, pp. 1440–1447.
Song Wang, Amy Corcoran, Victoria Leybova, Edward L Dreizin. 2015. “Metal-Based Iodine Bearing Materials Prepared by Mechanical Milling.” MRS Proceedings, vol. 1758, pp. mrsf14–1758.
Ani Abraham, Nicholas W Piekiel, Cory R Knick, Christopher J Morris, Edward Dreizin. 2015. “Quantification of Oxidizer Systems for Porous Silicon Combustion.” MRS Proceedings, vol. 1758, pp. mrsf14–1758.
Ani Abraham, Shasha Zhang, Yasmine Aly, Mirko Schoenitz, Edward L Dreizin. 2014. “Aluminum–Iodoform Composite Reactive Material.” Advanced Engineering Materials.
Edward L Dreizin. 2014. “Effect of surface tension on the temperature of burning metal droplets.” Combustion and Flame.
Travis R Sippel, Steven F Son, Lori J Groven, Shasha Zhang, EL Dreizin. 2014. “Exploring mechanisms for agglomerate reduction in composite solid propellants with polyethylene inclusion modified aluminum.” Combustion and Flame.
Rayon A Williams, Jaymin V Patel, Edward L Dreizin. 2014. “Ignition of Fully Dense Nanocomposite Thermite Powders by an Electric Spark.” Journal of Propulsion and Power, vol. 30, no. 3, pp. 765–774.
William L Shaw, Dana D Dlott, Rayon A Williams, Edward L Dreizin. 2014. “Ignition of Nanocomposite Thermites by Electric Spark and Shock Wave.” Propellants, Explosives, Pyrotechnics.
Y Aly, S Zhang, M Schoenitz, VK Hoffmann, EL Dreizin, M Yermakov, R Indugula, SA Grinshpun. 2014. “Iodine-containing aluminum-based fuels for inactivation of bioaerosols.” Combustion and Flame, vol. 161, no. 1, pp. 303–310.
Shashank Vummidi Lakshman, Salil Mohan, Edward L Dreizin, Mirko Schoenitz. 2014. “Kinetics of thermal decomposition of a synthetic K–H3O jarosite analog.” Journal of Thermal Analysis and Calorimetry, vol. 115, no. 1, pp. 609–620.
Rayon A Williams, Mirko Schoenitz, Alexandre Ermoline, Edward L Dreizin. 2014. “Low-temperature exothermic reactions in fully-dense Al/MoO 3 nanocomposite powders.” Thermochimica Acta, vol. 594, pp. 1–10.
Rayon A Williams, Mirko Schoenitz, Alexandre Ermoline, Edward L Dreizin. 2014. “Low-temperature exothermic reactions in fully-dense Al/MoO< sub> 3 nanocomposite powders.” Thermochimica Acta.
Marco A Machado, Daniel A Rodriguez, Yasmine Aly, Mirko Schoenitz, Edward L Dreizin, Evgeny Shafirovich. 2014. “Nanocomposite and mechanically alloyed reactive materials as energetic additives in chemical oxygen generators.” Combustion and Flame.
Edward L Dreizin, Mirko Schoenitz. 2014. “Reactive and Metastable Nanomaterials Prepared by Mechanical Milling.” Metal Nanopowders: Production, Characterization, and Energetic Applications, pp. 227–278.
WL Shaw, RA Williams, EL Dreizin, DD Dlott. 2014. “Using laser-driven flyer plates to study the shock initiation of nanoenergetic materials.” Journal of Physics: Conference Series, vol. 500, no. 18, pp. 182010.
Rayon A Williams, Mirko Schoenitz, Edward L Dreizin. 2014. “Validation of the Thermal Oxidation Model for Al/CuO Nanocomposite Powder.” Combustion Science and Technology, vol. 186, no. 1, pp. 47–67.
Shashank Vummidi Lakshman, Edward L Dreizin, Mirko Schoenitz. 2014. “Evaluation of K–H3O jarosite as thermal witness material.” Journal of Thermal Analysis and Calorimetry, vol. 117, pp. 141-149.
Shashank Vummidi Lakshman, Salil Mohan, Edward L Dreizin, Mirko Schoenitz. 2014. “Kinetics of thermal decomposition of a synthetic K–H3O jarosite analog.” Journal of Thermal Analysis and Calorimetry, vol. 115, pp. 609-620.
Amy Corcoran, Stefano Mercati, Hongqi Nie, Massimo Milani, Luca Montorsi, Edward L Dreizin. 2013. “Combustion of fine aluminum and magnesium powders in water.” Combustion and Flame.
Carlo Badiola, Edward L Dreizin. 2013. “Combustion of micron-sized particles of titanium and zirconium.” Proceedings of the Combustion Institute, vol. 34, no. 2, pp. 2237–2243.
Rayon A Williams, Jaymin V Patel, Alexandre Ermoline, Mirko Schoenitz, Edward L Dreizin. 2013. “Correlation of optical emission and pressure generated upon ignition of fully-dense nanocomposite thermite powders.” Combustion and Flame.
Priya R Santhanam, Alexandre Ermoline, Edward L Dreizin. 2013. “Discrete element model for an attritor mill with impeller responding to interactions with milling balls.” Chemical Engineering Science, vol. 101, pp. 366–373.
Yasmine Aly, Mirko Schoenitz, Edward L Dreizin. 2013. “Ignition and combustion of mechanically alloyed Al–Mg powders with customized particle sizes.” Combustion and Flame.
Y Aly, S Zhang, M Schoenitz, VK Hoffmann, EL Dreizin, M Yermakov, R Indugula, SA Grinshpun. 2013. “Iodine-containing aluminum-based fuels for inactivation of bioaerosols.” Combustion and Flame.
Alexandre Ermoline, Deniz Yildiz, Edward L Dreizin. 2013. “Model of heterogeneous combustion of small particles.” Combustion and Flame, vol. 160, no. 12, pp. 2982–2989.
Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2013. “Nano-structured Aluminum Powders with Modified Protective Surface Layers.” MRS Online Proceedings Library, vol. 1521.
Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2013. “Nearly Pure Aluminum Powders with Modified Protective Surface.” Combustion Science and Technology, vol. 185, no. 9, pp. 1360–1377.
Yasmine Aly, Vern K Hoffman, Mirko Schoenitz, Edward L Dreizin. 2013. “Preparation, ignition, and combustion of mechanically alloyed Al-Mg powders with customized particle sizes.” MRS Online Proceedings Library, vol. 1521.
Hongqi Nie, Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2013. “Reaction interface between aluminum and water.” International Journal of Hydrogen Energy, vol. 38, no. 26, pp. 11222–11232.
Shasha Zhang, Edward L Dreizin. 2013. “Reaction Interface for Heterogeneous Oxidation of Aluminum Powders.” The Journal of Physical Chemistry C, vol. 117, no. 27, pp. 14025–14031.
Yasmine Aly, Vern K Hoffman, Mirko Schoenitz, Edward L Dreizin. 2013. “Reactive, Mechanically Alloyed Al Mg Powders with Customized Particle Sizes and Compositions.” Journal of Propulsion and Power, vol. 30, no. 1, pp. 96–104.
Marco A Machado, Daniel A Rodriguez, Evgeny Shafirovich, Edward L Dreizin. 2013. “Selection of Nanocomposite Reactive Materials for Using in Oxygen and Hydrogen Generators.” .
Rayon A Williams, Mirko Schoenitz, Edward L Dreizin. 2013. “Validation of the Thermal Oxidation Model for AlCuO Nanocomposite Powder.” Combustion Science and Technology, no. just-accepted.
D Stamatis, A Ermoline, EL Dreizin. 2012. “A multi-step reaction model for ignition of fully-dense Al-CuO nanocomposite powders.” Combustion Theory and Modelling, vol. 16, no. 6, pp. 1011–1028.
Amy L Corcoran, Vern K Hoffmann, Edward L Dreizin. 2012. “Aluminum particle combustion in turbulent flames.” Combustion and Flame.
Sergey A Grinshpun, Atin Adhikari, Michael Yermakov, Tiina Reponen, Edward Dreizin, Mirko Schoenitz, Vern Hoffmann, Shasha Zhang. 2012. “Inactivation of Aerosolized Bacillus atrophaeus (BG) Endospores and MS2 Viruses by Combustion of Reactive Materials.” Environmental science & technology, vol. 46, no. 13, pp. 7334–7341.
Edward L Dreizin, others. 2012. “Laminar Lifted Flame Speed Measurements for Aerosols of Metals and Mechanical Alloys.” AIAA Journal, vol. 42, no. 7.
Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2012. “Metastable Aluminum-based Reactive Composite Materials Prepared by Cryomilling.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
E Beloni, EL Dreizin. 2012. “Model of heating and ignition of conductive polydisperse powder in electrostatic discharge.” Combustion Theory and Modelling, vol. 16, no. 6, pp. 976–993.
Rayon A Williams, Mirko Schoenitz, Alexandre Ermoline, Edward L Dreizin. 2012. “On Gas Release by Thermally-Initiated Fully-Dense 2Al. 3CuO Nanocomposite Powder.” International Journal of Energetic Materials and Chemical Propulsion, vol. 11, no. 3.
Carlo Badiola, Edward L Dreizin. 2012. “On weak effect of particle size on its burn time for micron-sized aluminum powders.” Combustion Science and Technology, vol. 184, no. 12, pp. 1993–2007.
Shasha Zhang, Carlo Badiola, Mirko Schoenitz, Edward L Dreizin. 2012. “Oxidation, ignition, and combustion of Al I< sub> 2 composite powders.” Combustion and Flame, vol. 159, no. 5, pp. 1980–1986.
Priya R Santhanam, Edward L Dreizin. 2012. “Real time indicators of material refinement in an attritor mill.” AIChE Journal.
Edward L Dreizin, others. 2012. “Thermal Initiation of Al-MoO3 Nanocomposite Materials Prepared by Different Methods.” Journal of Propulsion and Power, vol. 27, no. 5.
Sergey A Grinshpun, A Adhikari, Michael Yermakov, Tiina Reponen, Edward L. Dreyzin, Mirko Schoenitz, Vern Hoffmann, Shasha Zhang. 2012. “Inactivation of Aerosolized BG Endospores and MS2 Viruses by Combustion of Reactive Materials.” Environmental Science and Technology, vol. 46, no. 13, pp. 7334-7341.
Hongqi Nie, Mirko Schoenitz, Edward L. Dreyzin. 2012. “Calorimetric investigation of the aluminum–water reaction.” International Journal of Hydrogen Energy, vol. 37, no. 15, pp. 11035-11045.
Edward L. Dreyzin, Priya Santhanam. 2012. “Predicting conditions for scaled-up manufacturing of materials prepared by ball milling.” Powder Technology, vol. 221, pp. 403-411.
Shasha Zhang, Carlo Badiol, Mirko Schoenitz, Edward L. Dreyzin. 2012. “Oxidation, Ignition, and Combustion of Al•I2 Composite Powders.” Combustion and Flame, vol. 159, pp. 1980-1986.
Salil Mohan, Alexandre Ermoline, Edward L. Dreyzin. 2012. “Pyrophoricity of nano-sized aluminum particles.” Journal of Nanoparticle Research, vol. 14, pp. 723-729.
Ervin Beloni, Priya Santhanam, Edward L. Dreyzin. 2012. “Electrical conductivity of a metal powder struck by a spark.” Journal of Electrostatics, vol. 70, no. 1, pp. 157-165.
Rayon Williams, Ervin Beloni, Edward L. Dreyzin. 2012. “Ignition of Metal Powder Layers of Different Thickness by Electrostatic Discharge..” Journal of Propulsion and Power, vol. 28, no. 1, pp. 132-139.
Alexandre Ermoline, Demitrios Stamatis, Edward L. Dreyzin. 2012. “Low-temperature exothermic reactions in fully dense Al–CuO nanocomposite powders.” Thermochimica Acta , vol. 527, pp. 52-58.
Sergey A Grinshpun, Michael Yermakov, Reshmi Indugula, Atin Adhikari, Tiina Reponen, Shasha Zhang, Vern Hoffmann, Mirko Schoenitz, Edward Dreizin. 2011. “How Combustion of Energetic Materials Affects Viability of Aerosolized Bio-agents.” 第七届亚洲气溶胶会议论文集.
Edward L Dreizin, Carlo Badiola, Shasha Zhang, Yasmine Aly. 2011. “Particle combustion dynamics of metal-based reactive materials.” International Journal of Energetic Materials and Chemical Propulsion, vol. 10, no. 4.
Yasmine Aly, Demitrios Stamatis, Carlo Badiola, Edward L Dreizin. 2011. “Ternary Reactive Nanocomposite Powders.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Edward L. Dreyzin, Demitrios Stamatis, Kelvin Higa. 2011. “Thermal initiation of Al-MoO3 nanocomposite materials prepared by different methods.” Journal of Propulsion and Power, vol. 27, no. 5, pp. 1079-1087 .
Edward L. Dreyzin, Yasmine Aly, Mirko Schoenitz. 2011. “Aluminum-Metal Reactive Composites.” Combustion Science and Technology, vol. 183, pp. 1107–1132 .
Edward L. Dreyzin, Carlo Badiola, Robert Gill. 2011. “Combustion characteristics of micron-sized aluminum particles in oxygenated environments.” Combustion and Flame , vol. 158, pp. 2064–2070 .
Edward L. Dreyzin, Ervin Beloni. 2011. “Ignition of Titanium Powder Layers by Electrostatic Discharge.” Combustion Science and Technology, vol. 183, pp. 823–845 .
Edward L. Dreyzin, Alexandre Ermoline. 2011. “Equations for the Cabrera-Mott kinetics of oxidation for spherical nanoparticles.” Chemical Physics Letters , vol. 505, no. 1-3, pp. 47-50 .
Edward L. Dreyzin, Paul Dupiano, Demitrios Stamatis. 2011. “Hydrogen production by reacting water with mechanically milled composite aluminum-metal oxide powders.” International Journal of Hydrogen Energy , vol. 36, pp. 4781 – 4791 .
Edward L. Dreyzin, Demitrios Stamatis, X Zhu, Mirko Schoenitz, Paul Redner. 2011. “Consolidation and mechanical properties of reactive nanocomposite powders..” Powder Technology , vol. 208, pp. pp. 637–642.
Edward L. Dreyzin, Alexandre Ermoline, Mirko Schoenitz. 2011. “Reactions leading to ignition in fully dense nanocomposite Al-oxide systems..” Combustion and Flame, vol. 158, no. 6, pp. 1076–1083 .
Edward L. Dreyzin, Alex Ermoline, Yasmine Aly, M Trunov, Mirko Schoenitz. 2010. “Preparation and Characterization of Granular Hybrid Reactive Materials.” International Journal of Energetic Materials and Chemical Propulsion , vol. 9, no. 3, pp. 267–284 .
Laila Jallo, Mirko Schoenitz, Edward L. Dreyzin, Rajesh N. Dave, Curtis Johnson. 2010. “The effect of surface modification of aluminum powder on its flowability, combustion and reactivity..” Powder Technology , vol. 204, no. 1, pp. 63-70.
Shashank L Vummidi, Yasmine Aly, Mirko Schoenitz, Edward L Dreizin. 2010. “Characterization of Fine Nickel-Coated Powder as Potential Fuel Additive.” Journal of Propulsion and Power, vol. 26, no. 3, pp. 454–460.
Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2010. “Iodine Release, Oxidation, and Ignition of Mechanically Alloyed Al- I Composites.” The Journal of Physical Chemistry C, vol. 114, no. 46, pp. 19653–19659.
Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2010. “Oxidation of Aluminum Particles in Mixed CO2/H2O Atmospheres.” The Journal of Physical Chemistry C, vol. 114, no. 44, pp. 18925–18930.
D Foreign. 2010. “Premature Dissemination for public release.” .
Sergey A Grinshpun, Atin Adhikari, Michael Yermakov, Lauri Reponen, Tiina Reponen, Edward Dreizin, Mirko Schoenitz, Shasha Zhang, Vern Hoffmann. 2010. “Short-term Exposure of Aerosolized Bacillus Endospores to Combustion of Energetic Materials.” American Association for Aerosol Research, Oregon Convention Center, Portland, Oregon, USA http://aaarabstracts. com/2010/.
SA Grinshpun, A Adhikari, C Li, T Reponen, M Yermakov, M Schoenitz, E Dreizin, M Trunov, S Mohan. 2010. “Thermal inactivation of airborne viable< i> Bacillus subtilis spores by short-term exposure in axially heated air flow.” Journal of Aerosol Science, vol. 41, no. 4, pp. 352–363.
R. J. Gill, Carlo Badiola, Edward L. Dreyzin. 2010. “Combustion Times and Emission Profiles of Micron-Sized Aluminum Particles Burning in Different Environments.” Combustion and Flame, vol. 157, no. 11, pp. 2015-2023.
Edward L. Dreyzin, Shasha Zhang, Mirko Schoenitz. 2010. “Iodine Release, Oxidation, and Ignition of Mechanically Alloyed Al−I Composites.” Journal of Physical Chemistry C, vol. 114, no. 46, pp. 19653–19659 .
Sergey Grinshpun, C. Li, A. Adhikari, T. Reponen, M. Yermakov, M. Schoenitz, Edward L. Dreyzin, V. Hoffmann, M. Trunov. 2010. “Method for Studying Survival of Airborne Viable Microorganisms in Combustion Environments: Development and Evaluation.” Aerosol and Air Quality Research, no. 10, pp. 414-424.
Edward L. Dreyzin, Alexandre Ermolin, M Trunov, Yasmine Aly, Mirko Schoenitz. 2010. “Preparation and Characterization of Granular Hybrid Reactive Materials.” International Journal of Energetic Materials and Chemical Propulsion , vol. 9, no. 3, pp. 267–284 .
Edward L. Dreyzin, Shasha Zhang, Mirko Schoenitz. 2010. “Iodine Release, Oxidation, and Ignition of Mechanically Alloyed Al−I Composites.” Journal of Physical Chemistry C, vol. 114, no. 46, pp. 19653–19659 .
Mirko Schoenitz, Bhavita Patel, O Agboh, Edward L. Dreyzin. 2010. “Oxidation of aluminum powders at high heating rates.” Thermochimica Acta , vol. 507-508, pp. 115-122.
S Mohan, L Furet, Edward L. Dreyzin. 2010. “Aluminum Particle Ignition in Different Oxidizing Environments.” Combustion and Flame, vol. 157, pp. 1356-1363.
Laila Jallo, Mirko Schoenitz, Edward L. Dreyzin, Rajesh N. Dave, Curtis Johnson. 2010. “The effect of surface modification of aluminum powder on its flowability, combustion and reactivity..” Powder Technology , vol. 204, no. 1, pp. 63-70.
Edward L. Dreyzin, S. Vummidi, Y Aly, M Schoenitz. 2010. “Characterization of fine aluminum powder coated with nickel as a potential fuel additive..” Journal of Propulsion and Power, vol. 26, no. 3, pp. 454-460.
Shasha Zhang, Mirko Schoenitz, Edward L. Dreyzin. 2010. “Mechanically alloyed Al–I composite materials .” Journal of Physics and Chemistry of Solids , vol. 71, pp. 1213-1220.
S Grinshpun, A Adhikari, C. Li, M Yermakov, T. Reponen, M Schoenitz, Edward L. Dreyzin, M Trunov, S Mohan. 2010. “Thermal inactivation of airborne viable Bacillus subtilis spores by short-term exposure in axially heated air flow.” Journal of Aerosol Science, vol. 41, pp. 352-363.
Demitrios Stamatis, X. Jiang, Ervin Beloni, Edward L. Dreyzin. 2010. “Aluminum Burn Rate Modifiers Based on Reactive Nanocomposite Powders..” Propellants Explosives and Pyrotechnics, vol. 35, pp. 260-267.
Edward L. Dreyzin, Ervin Beloni. 2010. “Ignition of Aluminum Powders by Electro-Static Discharge.” Combustion and Flame, vol. 157, pp. 1346-1355.
Priya R Santhanam, Vern Hofmann, M. Trunov, Edward L. Dreyzin. 2009. “Characteristics of aluminum combustion obtained from constant volume explosion experiments.” Characteristics of aluminum combustion obtained from constant volume explosion experiments, vol. 182, pp. 904-921.
Salil Mohan, Edward L Dreizin. 2009. “Aluminum Particle Ignition in Mixed Environments.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2009. “Aluminum Powder Oxidation in CO2 and Mixed CO2/O2 Environments.” The Journal of Physical Chemistry C, vol. 113, no. 16, pp. 6768–6773.
Carlo Badiola, Mirko Schoenitz, Xiaoying Zhu, Edward L Dreizin. 2009. “Aluminum Rich Al-CuO Nanocomposite Materials Prepared by Arrested Reactive Milling at Cryogenic and Room Temperatures.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Demitrios Stamatis, Xiaoying Zhu, Alexandre Ermoline, Mirko Schoenitz, Edward L Dreizin, Paul Redner. 2009. “Consolidation of reactive nanocomposite powders.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Ervin Beloni, Edward L Dreizin. 2009. “Experimental study of ignition of magnesium powder by electrostatic discharge.” Combustion and Flame, vol. 156, no. 7, pp. 1386–1395.
Ervin Beloni, Edward L Dreizin. 2009. “Ignition of Different Size Al Particles in a Powder Bed by Electro-Static Discharge (ESD) Stimulation.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Carlo Badiola, Mirko Schoenitz, Edward L Dreizin. 2009. “Mechanically Alloyed Al-Ti Powders Prepared by Mechanical Milling at Cryogenic Temperatures.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Edward L Dreizin. 2009. “Metal-based reactive nanomaterials.” Progress in Energy and Combustion Science, vol. 35, no. 2, pp. 141–167.
Salil Mohan, Mikhaylo A Trunov, Edward L Dreizin. 2009. “On possibility of vapor-phase combustion for fine aluminum particles.” Combustion and Flame, vol. 156, no. 11, pp. 2213–2216.
Mirko Schoenitz, Chi-Mon Chen, Edward L Dreizin. 2009. “Oxidation of aluminum particles in the presence of water.” The Journal of Physical Chemistry B, vol. 113, no. 15, pp. 5136–5140.
Edward Dreizin. 2009. “Training Graduate Students in the Area of Novel Reactive Nanomaterials.” .
Edward L. Dreyzin, Carlo Badiola, Xiaoying Zhu, Mirko Schoenitz. 2009. “Nanocomposite thermite powders prepared by cryomilling.” Journal of Alloys and Compounds, vol. 488, pp. 386-391.
Carlo Badiola, Mirko Schoenitz, Xiaoying Zhu, Edward L. Dreyzin. 2009. “Nanocomposite thermite powders prepared by cryomilling.” Journal of Alloys and Compounds , vol. 488, pp. 386-391.
Salil lMohan, Luc Furet Furet, Edward L. Dreyzin, . 2009. “On possibility of vapor-phase combustion for fine aluminum particles.” Combustion and Flame , vol. 156, no. 11, pp. 2213-2216 .
Edward L. Dreyzin, Robert Gill, Salil Mohan. 2009. “Sizing and Burn Time Measurements of Micron-Sized Metal Powders.” Review of Scientific Instruments , vol. 80, pp. 064101-1 – 064101-7 .
Edward L. Dreyzin, Ervin Beloni. 2009. “Experimental study of ignition of magnesium powder by electro-static discharge.” Combustion and Flame, vol. 156, no. 7, pp. 1386-1395.
Edward L. Dreyzin, Rajesh N. Dave, Mirko Schoenitz, Xianquin Jiang, M Trunov. 2009. “Mechanical alloying and reactive milling in a high energy planetary mill.” Journal of Alloys and Compounds , vol. 478, pp. 246-251.
Swati M Umbrajkar, Soumitri Seshadri, Mirko Schoenitz, Vern K Hoffmann, Edward L Dreizin. 2008. “Aluminum-rich Al-MoO3 nanocomposite powders prepared by arrested reactive milling.” Journal of Propulsion and Power, vol. 24, no. 2, pp. 192–189.
Swati M Umbrajkar, Soumitri Seshadri, Mirko Schoenitz, Vern K Hoffmann, Edward L Dreizin. 2008. “Aluminum-rich Al-MoO3 nanocomposite powders prepared by arrested reactive milling.” Journal of Propulsion and Power, vol. 24, no. 2, pp. 192–189.
Mikhaylo A Trunov, Vern K Hoffmann, Mirko Schoenitz, Edward L Dreizin. 2008. “Combustion of boron-titanium nanocomposite powders in different environments.” Journal of Propulsion and Power, vol. 24, no. 2, pp. 184–191.
Ervin Beloni, Vern K Hoffmann, Edward L Dreizin. 2008. “Combustion of decane-based slurries with metallic fuel additives.” Journal of Propulsion and Power, vol. 24, no. 6, pp. 1403–1411.
Mirko Schoenitz, Demitrios Stamatis, Edward L Dreizin, Sergey A Grinshpun. 2008. “Filled Nanocomposite Materials for Biocidal Applications.” The 2008 Annual Meeting.
Demitrios Stamatis, Zhi Jiang, Vern K Hoffmann, Mirko Schoenitz, Edward L Dreizin. 2008. “Fully dense, aluminum-rich Al-CuO nanocomposite powders for energetic formulations.” Combustion Science and Technology, vol. 181, no. 1, pp. 97–116.
Salil Mohan, Mikhaylo A Trunov, Edward L Dreizin. 2008. “Heating and ignition of metallic particles by a CO2 laser.” Journal of Propulsion and Power, vol. 24, no. 2, pp. 199–205.
Swati M Umbrajkar, Chi-Mon Chen, Mirko Schoenitz, Edward L Dreizin. 2008. “On problems of isoconversion data processing for reactions in Al-rich Al–MoO< sub> 3 thermites.” Thermochimica Acta, vol. 477, no. 1, pp. 1–6.
Mirko Schoenitz, Salil Mohan, Chi-Mon Chen, Edward Dreizin. 2008. “Oxidation and Ignition of Aluminum Particles in the Presence of Water Vapor.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Alexandre Ermoline, Mirko Schoenitz, Mikhaylo A Trunov, Edward L Dreizin. 2008. “Preparation and Characterization of Metal-Bound Hybrid Reactive Particles.” The 2008 Annual Meeting.
Carlo Badiola, Edward L Dreizin, Mirko Schoenitz, Xiaoying Zhu. 2008. “Reactive Nanocomposite Materials Prepared by Cryogenic Milling.” The 2008 Annual Meeting.
Carlo Badiola, Mirko Schoenitz, Edward L Dreizin. 2008. “Synthesis of Aluminum-Rich Nanocomposite Powders at Cryogenic Temperatures.” .
Swati Umbrajkar, Mikhaylo A Trunov, Mirko Schoenitz, Edward L Dreizin, Russell Broad. 2007. “Arrested Reactive Milling Synthesis and Characterization of Sodium-Nitrate Based Reactive Composites.” Propellants, Explosives, Pyrotechnics, vol. 32, no. 1, pp. 32–41.
Curtis E Johnson, Stephen Fallis, Andrew P Chafin, Thomas J Groshens, Kelvin T Higa, Ismail M K. Ismail, Tom W Hawkins. 2007. “Characterization of nanometer-to micron-sized aluminum powders: size distribution from thermogravimetric analysis.” Journal of propulsion and power, vol. 23, no. 4, pp. 669–682.
Soumitri Seshadri, Edward L Dreizin. 2007. “Combustion of off-Stoichiometric AlMoO3 Nano Composite Powders in Dry Air.” The 2007 Annual Meeting.
Kwabena A. Narh, M Khanolkar, S Umbrajkar, E Dreizin. 2007. “EFFECT OF CARBON NANOTUBES ON THE CRYSTALLIZATION BEHAVIOR POLYETHYLENE OXIDE.” ANTEC-CONFERENCE PROCEEDINGS-, vol. 3, pp. 1766.
Mirko Schoenitz, Mikhaylo A Trunov, Chi-Mon Chen, Edward L Dreizin. 2007. “Experimental Investigation of Aluminum Oxidation in Water.” The 2007 Annual Meeting.
Swati M Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2007. “Fuel-rich Al-MoO3 Nanocomposite Powders Prepared by Arrested Reactive Milling.” .
Demitrios Stamatis, Vern K Hoffmann, Mirko Schoenitz, Edward L Dreizin. 2007. “Fully Dense Aluminum Rich Al-Cuo Nanocomposites for Energetic Formulations.” The 2007 Annual Meeting.
S Umbrajkar, Mirko Schoenitz, E Dreizin. 2007. “Heterogeneous Processes Leading To Metal Ignition In Reactive Nanocomposite Materials.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Ervin Beloni, Eric Whitman, Mikhaylo A Trunov, Edward L Dreizin. 2007. “Ignition of Metal Powders by Electric Spark.” The 2007 Annual Meeting.
Mirko Schoenitz, Swati M Umbrajkar, Edward L Dreizin. 2007. “Kinetic analysis of thermite reactions in Al-MoO3 nanocomposites.” Journal of Propulsion and Power, vol. 23, no. 4, pp. 683–687.
X Zhu, M Schoenitz, EL Dreizin. 2007. “Mechanically alloyed Al–Li powders.” Journal of alloys and compounds, vol. 432, no. 1, pp. 111–115.
Mikhaylo A Trunov, Mirko Schoenitz, Edward L Dreizin. 2007. “Modeling of Reduction-Oxidation Reactions in Al-MoO3 Nanocomposite Powders.” The 2007 Annual Meeting.
T Bazyn, GLUMAC*, N, H Krier, TS Ward, M Schoenitz, EL Dreizin. 2007. “Reflected shock ignition and combustion of aluminum and nanocomposite thermite powders.” Combustion science and technology, vol. 179, no. 3, pp. 457–476.
Swati M Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2006. “Control of Structural Refinement and Composition in Al-MoO3 Nanocomposites Prepared by Arrested Reactive Milling.” Propellants, Explosives, Pyrotechnics, vol. 31, no. 5, pp. 382–389.
Mikhaylo A Trunov, M Schoenitz, EL Dreizin. 2006. “Effect of polymorphic phase transformations in alumina layer on ignition of aluminium particles.” Combustion Theory and Modelling, vol. 10, no. 4, pp. 603–623.
Swati M Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2006. “Exothermic reactions in Al–CuO nanocomposites.” Thermochimica acta, vol. 451, no. 1, pp. 34–43.
Trent S Ward, Mikhaylo A Trunov, Mirko Schoenitz, Edward L Dreizin. 2006. “Experimental methodology and heat transfer model for identification of ignition kinetics of powdered fuels.” International journal of heat and mass transfer, vol. 49, no. 25, pp. 4943–4954.
Alexandre Ermoline, Mirko Schoenitz, Edward L Dreizin. 2006. “High-temperature phase equilibria in the system Zr–O–N.” Journal of materials research, vol. 21, no. 02, pp. 320–328.
Salil Mohan, Yuriy L Shoshin, Edward L Dreizin. 2006. “Ignition of Aerosolized Reactive Particles at High Heating Rates.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 896, pp. 165.
Yuriy L Shoshin, Mikhaylo A Trunov, Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2006. “Ignition of aluminum-rich Al–Ti mechanical alloys in air.” Combustion and flame, vol. 144, no. 4, pp. 688–697.
Mikhaylo A Trunov, Swati Umbrajkar, Mirko Schoenitz, Joseph T Mang, Edward L Dreizin. 2006. “Melting and Oxidation of Nanometer Size Aluminum Powders.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 896, pp. 171.
L Gránásy, T Pusztai, T Börzsönyi, G Toth, G Tegze, JA Warren, JF Douglas, Mirko Schoenitz, Edward L Dreizin, I Gutierrez-Urrutia, others. 2006. “OUTSTANDING MEETING PAPER.” J. Mater. Res, vol. 21, no. 2, pp. 310.
Mikhaylo A Trunov, Swati M Umbrajkar, Mirko Schoenitz, Joseph T Mang, Edward L Dreizin. 2006. “Oxidation and melting of aluminum nanopowders.” The Journal of Physical Chemistry B, vol. 110, no. 26, pp. 13094–13099.
Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2006. “Oxidation of Mechanically Alloyed Al-rich Al–Ti Powders.” Oxidation of metals, vol. 65, no. 5-6, pp. 357–376.
Yuriy L Shoshin, Edward L Dreizin. 2006. “Particle combustion rates for mechanically alloyed Al–Ti and aluminum powders burning in air.” Combustion and flame, vol. 145, no. 4, pp. 714–722.
Xiaoying Zhu, Mirko Schoenitz, Vern K Hoffmann, Edward L Dreizin. 2006. “Reactive Al-Li Powders Prepared by Mechanical Alloying.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 896, pp. 39.
SM Umbrajkar, M Schoenitz, EL Dreizin. 2006. “Structural Refinement in Al-MoO 3 Nanocomposites Prepared by Arrested Reactive Milling.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 896, pp. 57.
Trent S Ward, Wenliang Chen, Mirko Schoenitz, Rajesh N. Dave, Edward L Dreizin. 2005. “A study of mechanical alloying processes using reactive milling and discrete element modeling.” Acta Materialia, vol. 53, no. 10, pp. 2909–2918.
Mirko Schoenitz, Trent Ward, Edward Dreizin. 2005. “Arrested Reactive Milling for In-Situ Production of Energetic Nanocomposites for Propulsion and Energy-Intensive Technologies in Exploration Missions.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Mirko Schoenitz, Xiaoying Zhu, Edward L Dreizin. 2005. “Carbide formation in Al–Ti mechanical alloys.” Scripta materialia, vol. 53, no. 9, pp. 1095–1099.
Mikhaylo A Trunov, Mirko Schoenitz, Xiaoying Zhu, Edward L Dreizin. 2005. “Effect of polymorphic phase transformations in Al< sub> 2 O< sub> 3 film on oxidation kinetics of aluminum powders.” Combustion and Flame, vol. 140, no. 4, pp. 310–318.
Swati M Umbrajkar, Mirko Schoenitz, Steven R Jones, Edward L Dreizin. 2005. “Effect of temperature on synthesis and properties of aluminum–magnesium mechanical alloys.” Journal of alloys and compounds, vol. 402, no. 1, pp. 70–77.
Mirko Schoenitz, Trent S Ward, Edward L Dreizin. 2005. “Fully dense nano-composite energetic powders prepared by arrested reactive milling.” Proceedings of the Combustion Institute, vol. 30, no. 2, pp. 2071–2078.
Mikhaylo A Trunov, Mirko Schoenitz, Edward L Dreizin. 2005. “Ignition of aluminum powders under different experimental conditions.” Propellants, Explosives, Pyrotechnics, vol. 30, no. 1, pp. 36–43.
W Chen, M Schoenitz, TS Ward, RN Dave, EL Dreizin. 2005. “Numerical simulation of mechanical alloying in a shaker mill by discrete element method.” KONA Powder Part, vol. 23, pp. 152–162.
Swati M Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2005. “Structural refinement in Al-MoO 3 nanocomposites prepared by arrested reactive milling.” Thadhani N, Armstrong RW, Gash AE, Wilson WH Materials Research Society Symposium Proceedings, vol. 896.
Swati Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2005. “Structural refinement in Al-MoO3 nanocomposites prepared by arrested reactive milling.” MRS Proceedings, vol. 896, pp. 0896–H02.
Binu Zacharia Eapen, VK Hoffmann, M Schoenitz, EL Dreizin. 2004. “Combustion of aerosolized spherical aluminum powders and flakes in air.” Combustion Science and Technology, vol. 176, no. 7, pp. 1055–1069.
Alexandre Ermoline, Mirko Schoenitz, VK Hoffmann, EL Dreizin. 2004. “Experimental technique for studying high-temperature phases in reactive molten metal based systems.” Review of scientific instruments, vol. 75, no. 12, pp. 5177–5185.
Yuriy Shoshin, Edward L Dreizin. 2004. “Laminar lifted flame speed measurements for aerosols of metals and mechanical alloys.” AIAA journal, vol. 42, no. 7, pp. 1416–1426.
Mirko Schoenitz, Xiaoying Zhu, Edward L Dreizin. 2004. “Mechanical alloys in the Al-rich part of the Al-Ti binary system.” Journal of Metastable and Nanocrystalline Materials, vol. 20, pp. 455–461.
Trent S Ward, Wenliang Chen, Mirko Schoenitz, E Dreizin, Rajesh N. Dave. 2004. “Nano-composite energetic powders prepared by arrested reactive milling.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Mirko Schoenitz, Edward L Dreizin. 2004. “Oxidation processes and phase changes in metastable Al-Mg alloys.” Journal of propulsion and power, vol. 20, no. 6, pp. 1064–1068.
Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2004. “Oxidation Processes and Phase Changes in Metastable Al-Ti Mechanical Alloys.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 800, pp. 99–104.
Edward L Dreizin, Yuriy L Shoshin, Ruslan S Murdyy, Vern K Hoffmann. 2004. “Reaction mechanisms and particle interaction in burning two-phase systems.” .
Mirko Schoenitz, Edward L Dreizin, Emil Shtessel. 2003. “Constant volume explosions of aerosols of metallic mechanical alloys and powder blends.” Journal of propulsion and power, vol. 19, no. 3, pp. 405–412.
EL Dreizin. 2003. “Effect of Phase Changes on Metal-Particle Combustion Processes.” Combustion, Explosion and Shock Waves, vol. 39, no. 6, pp. 681–693.
E Dreizin, Y Shoshin. 2003. “Laminar lifted flame velocity measurements for aerosols of metals and mechanical alloys.” 41 st AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV.
Y Shoshin, E Dreizin. 2003. “Laminar lifted flame velocity measurements for aerosols of metals and mechanical alloys.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Y Shoshin, E Dreizin. 2003. “Particle combustion rates in premixed flames of polydisperse metal—air aerosols.” Combustion and Flame, vol. 133, no. 3, pp. 275–287.
M Schoenitz, T Ward, EL Dreizin. 2003. “Preparation of energetic metastable nano-composite materials by arrested reactive milling.” MRS Proceedings, vol. 800, no. 1.
Mirko Schoenitz, Edward L Dreizin. 2003. “Structure and properties of Al-Mg mechanical alloys.” Journal of materials research, vol. 18, no. 8, pp. 1827–1836.
Edward L Dreizin, Yuriy L Shoshin, Ruslan S Mudryy, Vern K Hoffmann. 2002. “Constant pressure flames of aluminum and aluminum-magnesium mechanical alloy aerosols in microgravity.” Combustion and flame, vol. 130, no. 4, pp. 381–385.
Sukrut S Thipse, Edward L Dreizin. 2002. “Metal partitioning in products of incineration of municipal solid waste.” Chemosphere, vol. 46, no. 6, pp. 837–849.
Sukrut S Thipse, Mirko Schoenitz, Edward L Dreizin. 2002. “Morphology and composition of the fly ash particles produced in incineration of municipal solid waste.” Fuel processing technology, vol. 75, no. 3, pp. 173–184.
Yuriy L Shoshin, Ruslan S Mudryy, Edward L Dreizin. 2002. “Preparation and characterization of energetic Al-Mg mechanical alloy powders.” Combustion and Flame, vol. 128, no. 3, pp. 259–269.
Alexandre Ermoline, Mirko Schoenitz, Edward Dreizin, Nan Yao. 2002. “Production of carbon-coated aluminium nanopowders in pulsed microarc discharge.” Nanotechnology, vol. 13, no. 5, pp. 638.
Y Shoshin, E Dreizin. 2002. “Production of well-controlled laminar aerosol jets and their application for studying aerosol combustion processes.” Aerosol Science & Technology, vol. 36, no. 9, pp. 953–962.
M Schoenitz, Y Shoshin, R Mudryy, E Dreizin. 2001. “Characterization of Structure and Combustion Behavior of Metastable Al-Mg Mechanical Alloy Powders.” CHEMICAL AND PHYSICAL PROCESSES IN COMBUSTION, pp. 147–150.
SERGIO ROSSI, EDWARD L DREIZIN, CHUNG K LAW. 2001. “Combustion of aluminum particles in carbon dioxide.” Combustion science and technology, vol. 164, no. 1, pp. 209–237.
EL Dreizin, YL Shoshin, RS Mudryy. 2001. “High Energy Density Powders of the Al-Mg Mechanical Alloys.” 50 th JANNAF Propulsion Meeting, vol. 1.
A Ermoline, Y Shoshin, E Dreizin. 2001. “Production of Coated Aluminum Nanopowders in Pulsed Microarc Discharge.” CHEMICAL AND PHYSICAL PROCESSES IN COMBUSTION, pp. 288–291.
Y Shoshin, E Dreizin. 2001. “Radiation Intensity Profiles of Premixed Flames of Polydisperse Metal-Air Aerosol.” CHEMICAL AND PHYSICAL PROCESSES IN COMBUSTION, pp. 408–411.
Sukrut S Thipse, Chad Sheng, Michael R. Booty, Richard S Magee, Edward L Dreizin. 2001. “Synthetic fuel for imitation of municipal solid waste in experimental studies of waste incineration.” Chemosphere, vol. 44, no. 5, pp. 1071–1077.
Edward L Dreizin, Charles H Berman, Edward P Vicenzi. 2000. “Condensed-phase modifications in magnesium particle combustion in air.” Combustion and flame, vol. 122, no. 1, pp. 30–42.
Edward L Dreizin, Vern K Hoffmann. 2000. “Experiments on magnesium aerosol combustion in microgravity.” Combustion and flame, vol. 122, no. 1, pp. 20–29.
S Candel, HH Chiu, K Dam-Johansen, EL Dreizin, D Drysdale, EG Eddings, FJ Frandsen, BE Gelfand, G Grant, EU Hartge, others. 2000. “Loth, E. 161.” .
EL Dreizin. 2000. “Phase changes in metal combustion.” Progress in Energy and Combustion Science, vol. 26, no. 1, pp. 57–78.
EL Dreizin, CH Berman, VK Hoffman, EP Vicenzi. 1999. “Combustion of aerosolized metal particles in microgravity.” .
Edward L Dreizin, Vern K Hoffmann. 1999. “Constant pressure combustion of aerosol of coarse magnesium particles in microgravity.” Combustion and flame, vol. 118, no. 1, pp. 262–280.
Edward L Dreizin. 1999. “Experimental study of aluminum particle flame evolution in normal and micro-gravity.” Combustion and Flame, vol. 116, no. 3, pp. 323–333.
Edward L Dreizin, Vern K Hoffmann, Edward P Vicenzi. 1999. “High-temperature phases in ternary Zr–O–N systems.” Journal of materials research, vol. 14, no. 10, pp. 3840–3842.
EL Dreizin. 1999. “Internal Heterogeneous Processes in Aluminum Combustion.” .
Edward L Dreizin. 1999. “On the mechanism of asymmetric aluminum particle combustion.” Combustion and Flame, vol. 117, no. 4, pp. 841–850.
EL Dreizin, DG Keil, W Felder, EP Vicenzi. 1999. “Phase changes in boron ignition and combustion.” Combustion and flame, vol. 119, no. 3, pp. 272–290.
IE Molodetsky, EP Vicenzi, EL Dreizin, CK Law. 1998. “Phases of titanium combustion in air.” Combustion and flame, vol. 112, no. 4, pp. 522–532.
Edward L Dreizin. 1997. “Interaction of burning metal particles.” Fourth Inter. Microg. Comb. Workshop. NASA CP–10194, pp. 55–62.
Edward L Dreizin. 1997. “Interaction of burning metal particles.” .
Edward L Dreizin. 1997. “Internal and Surface Phenomena in Heterogenous Metal Combustion.” .
DG Keil, EL Dreizin, W Felder, EP Vicenzi. 1997. “On the Mechanism of Boron Ignition.” .
CH Berman, OP Andersen, EL Dreizin. 1996. “Enhanced Mixing and Noise Reduction by Auxiliary Jets.” ASME-PUBLICATIONS-FED, vol. 237, pp. 491–496.
IE Molodetsky, EL Dreizin, CK Law. 1996. “Evolution of particle temperature and internal composition for zirconium burning in air.” Symposium (International) on Combustion, vol. 26, no. 2, pp. 1919–1927.
Edward L Dreizin. 1996. “Experimental study of stages in aluminium particle combustion in air.” Combustion and Flame, vol. 105, no. 4, pp. 541–556.
IE Molodetsky, EL Dreizin. 1996. “High-temperature oxygen dissolution in liquid zirconium.” Materials Research Society Symposium Proceedings, vol. 418, pp. 195–200.
EL Dreizin, HF Calcote. 1995. “A New Mechanism of Boron Ignition: Through the Formation of a Saturated BO Solution.” CHEMICAL AND PHYSICAL PROCESSES IN COMBUSTION, pp. 333–336.
Edward L Dreizin, Irina E Molodetsky, Chung K Law. 1995. “Internal and surface phenomena in metal combustion.” NASA. Lewis Research Center, The 3 rd International Microgravity Combustion Workshop p 129-134(SEE N 96-15552 03-29).
Edward L Dreizin, Michael A Trunov. 1995. “Surface phenomena in aluminum combustion.” Combustion and flame, vol. 101, no. 3, pp. 378–382.
Edward L Dreizin. 1994. “Uniform Solid and Hollow Metal Spheres: Formation in a Pulsed Micro-Arc and Applications.” MRS Proceedings, vol. 372, no. 1.
Edward Dreizin, Mihail Trunov. 1993. “Formation of a high-current pulsed gas discharge as a source of highly concentrated energy flux to treat metal surfaces.” Plasma Science, IEEE Transactions on, vol. 21, no. 6, pp. 619–624.
AV Suslov, EL Dreizin, MA Trunov. 1993. “Formation of monodisperse refractory metal particles by impulse discharge.” Powder technology, vol. 74, no. 1, pp. 23–30.
EL Dreizin, AV Suslov, MA Trunov. 1993. “General trends in metal particles heterogeneous combustion.” Combustion science and technology, vol. 90, no. 1-4, pp. 79–99.
EL Dreizin, AV Suslov, MA Trunov. 1993. “Temperature jumps in free metal particle combustion.” Combustion science and technology, vol. 87, no. 1-6, pp. 45–58.
AV Suslov, EL Dreizin, MA Trunov. 1991. “Aerodynamic resistance to the movement ofhigh-temperature metal particles.” Journal of Aerosol Science, vol. 22, pp. S281–S284.
AV Suslov, ÉL Dreizin, MA Trunov. 1991. “Behavior of monodispersed metal particles in various media.” Journal of Engineering Physics and Thermophysics, vol. 60, no. 4, pp. 472–476.
AV Suslov, EL Dreizin, M Trunov. 1991. “Behaviour of Metal Monodisperse Particles in Different Media.” Inzhenerno-Fizicheskii Zhurnal(USSR), vol. 60, no. 4, pp. 620–625.
AV Suslov, EL Dreizin, MA Trunov. 1991. “Interaction of high temperature metal particleswith different materials.” Journal of Aerosol Science, vol. 22, pp. S277–S280.
AV Suslov, ÉL Dreizin, MA Trunov. 1991. “Investigation of the properties of monodispersed microgranules of refractory metals prepared in a pulsed arc.” Journal of engineering physics, vol. 60, no. 4, pp. 451–454.
AV Suslov, EL Dreizin, M Trunov. 1991. “Study of Properties of Monodisperse Microgranules of Fire-Proof Metals Produced in a Pulse Arc.” Inzhenerno-Fizicheskii Zhurnal(USSR), vol. 60, no. 4, pp. 595–599.
Valery Sinditskii, Viacheslav Egorshev, Valery Serushkin, Sergey Filatov, Anton Chernyi, Jan Puszynski, Shasha Zhang, Mirko Schoenitz, Edward L Dreizin, Keiichi Hori, others. 1991. “Voce tem acesso a.” International Journal, vol. 1.
AV Suslov, EL Dreizin. 1990. “Producing monodisperse metallic powders in a pulsed electric arc.” Powder Metallurgy and Metal Ceramics, vol. 29, no. 12, pp. 939–943.
AV Suslov, EL Dreizin. 1990. “Production of monodisperse metal powders in pulse electric arc.” Poroshkovaya Metallurgiya, no. 12, pp. 1–5.
AV Suslov, EL Dreizin, MA Trunov. 1990. “Study of combustion of monodisperse metallic particles produced by impulse arc.” Combustion, Explosion, and Shock Waves, vol. 26, no. 4, pp. 394–396.
DY Cheng, RE Dannenberg. 1971. “Dark-pause measurements in a high-pressure arc discharge.” AIAA Journal, vol. 9, no. 1, pp. 184–186.
Mirko Schoenitz, Kerri Lee Chintersingh, Edward L. Dreyzin. 2023. “Process-property correlations for spherical composite Al\textperiodcentered Ti powders prepared by emulsion-assisted milling.” Powder Technology, vol. 428, pp. 118806.
Shomik Mukhopadhyay, Khushi Patel, Mirko Schoenitz, Edward L. Dreyzin. 2023. “Removal of powders from cavities in contaminated surfaces by shock and plasma generated by an adjacent electro-static discharge.” Powder Technology, vol. 420, pp. 118407.
Ella V Ivanova, Ashvinkumar Vasudevan, Elif Irem Senyurt, Mirko Schoenitz, Alexei Khalizov, Edward L. Dreyzin, Gennady Gor. 2023. “Surface Tension of Organophosphorus Compounds: Sarin and its Surrogates.” Langmuir, vol. 39, no. 15, pp. 5569--5578.
House Andrew, Anna Kuna, Daniel Hastings, Nikki Rodriguez, Mirko Schoenitz, Edward L. Dreyzin, Murat Guvendiren. 2023. “Effect of particle shape on rheology and printability of highly filled reactive inks for direct ink writing.” Progress in Additive Manufacturing.
Elif Irem Senyurt, Edward L. Dreyzin. 2022. “At what ambient temperature can thermal runaway of a burning metal particle occur?.” Combustion and Flame, vol. 236, pp. 111800.
Hicham Jabraoui, Alain Esteve, Mirko Schoenitz, Edward L. Dreyzin, Carole Rossi. 2022. “Atomic scale insights into the first reaction stages prior to Al/CuO nanothermite ignition: influence of porosity.” ACS applied materials \& interfaces, vol. 14, no. 25, pp. 29451--29461.
Purvam Mehulkumar Gandhi, Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Effect of organic liquid process control agents on properties of ball-milled powders.” Advanced Powder Technology, vol. 33, no. 1, pp. 103332.
Mehnaz Mursalat, Holly McCann, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Effect of particle morphology on characteristics of pressed aluminum-boron reactive powders.” Journal of Energetic Materials, pp. 1--13.
Mehnaz Mursalat, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Effect of particle morphology on reactivity, ignition and combustion of boron powders.” Fuel, vol. 324, pp. 124538.
Shomik Mukhopadhyay, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Effect of reactive B--Ti powder morphology on its removal from a surface and ignition by electro-static discharge.” Journal of Electrostatics, vol. 120, pp. 103766.
Siva Kumar Valluri, Dana Dlott, Edward L. Dreyzin. 2022. “Exploring the Use of Aluminized Composites as Additives in Traditional Explosives.” Bulletin of the American Physical Society, vol. 67.
Siva Kumar Valluri, Dana Dlott, Edward L. Dreyzin. 2022. “Porosity: The Key to Initiating Metallic Composite Particles under Shock Compression.” Bulletin of the American Physical Society, vol. 67.
Mehnaz Mursalat, Agata Skura, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Potential one-pot synthesis of spherical magnesium silicate powder by mechanical milling.” Powder Technology, vol. 404, pp. 117458.
Ashvin Vasudevan, Elif Irem Senyurt, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Removal of diisopropyl methyl phosphonate (DIMP) from heated metal oxide surfaces.” Journal of Hazardous Materials, pp. 130154.
Daniel Hastings, Nikki Rodriguez, Holly McCann, Mirko Schoenitz, Edward L. Dreyzin. 2022. “Titanium-boron reactive composite powders with variable morphology prepared by arrested reactive milling.” Fuel, vol. 310, pp. 122313.
Siva Kumar Valluri, Purvam Mehulkumar Gandhi, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Boron-Rich Composite Thermite Powders with Binary Bi2O3\textperiodcentered CuO Oxidizers.” Energy \& Fuels.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Combustion of Composites of Boron with Bismuth and Cobalt Fluorides in Different Environments.” Combustion Science and Technology, vol. 193, no. 8, pp. 1343--1358.
Ashvin Vasudevan, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Effect of metal nitrate on mechanochemical nitration of toluene.” Reaction Chemistry \& Engineering.
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Effect of Purity, Surface Modification and Iron Coating on Ignition and Combustion of Boron in Air.” Combustion Science and Technology, vol. 193, no. 9, pp. 1567--1586.
Sergey Matveev, Dana D Dlott, Siva Kumar Valluri, Mehnaz Mursalat, Edward L. Dreyzin. 2021. “Fast energy release from reactive materials under shock compression.” Applied Physics Letters, vol. 118, no. 10, pp. 101902.
Daniel Hastings, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Highly reactive spheroidal milled aluminum.” Materialia, vol. 15, pp. 100959.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Ignition Mechanisms of Reactive Nanocomposite Powders Combining Al, B, and Si as Fuels with Metal Fluorides as Oxidizers.” Combustion Science and Technology, pp. 1--22.
Ci Huang, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Ignition of zirconium powders placed near an electrostatic discharge.” Combustion and Flame, vol. 226, pp. 1--13.
Xinhang Liu, Adam Sims, Chris Murzyn, Nick G Glumac, Edward L. Dreyzin. 2021. “Iodine Release by Combustion of Composite Mg∙ Ca (IO3) 2 Powder.” Combustion Science and Technology, vol. 193, no. 6, pp. 1042--1054.
Mehnaz Mursalat, Ci Huang, Baptiste Julien, Mirko Schoenitz, Est\`eve, Alain, Carole Rossi, Edward L. Dreyzin. 2021. “Low-Temperature Exothermic Reactions in Al/CuO Nanothermites Producing Copper Nanodots and Accelerating Combustion.” ACS Applied Nano Materials, vol. 4, no. 4, pp. 3811--3820.
Ashvin Vasudevan, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Parameters affecting mechanochemical nitration of aromatic precursors.” Chemical Engineering Science, vol. 246, pp. 116906.
Elif Irem Senyurt, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Rapid destruction of sarin surrogates by gas phase reactions with focus on diisopropyl methylphosphonate (DIMP).” Defence Technology, vol. 17, no. 3, pp. 703--714.
Mehnaz Mursalat, Mirko Schoenitz, Edward L. Dreyzin, Neveu, Aur\'elien, Filip Francqui. 2021. “Spherical boron powders prepared by mechanical milling in immiscible liquids.” Powder Technology, vol. 388, pp. 41--50.
Akhil V Marayikkottu, Saurabh S Sawant, Deborah A Levin, Ci Huang, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Study of particle lifting mechanisms in an electrostatic discharge plasma.” International Journal of Multiphase Flow, vol. 137, pp. 103564.
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Transition metal catalysts for boron combustion.” Combustion Science and Technology, vol. 193, no. 8, pp. 1400--1424.
Shomik Mukhopadhyay, Mirko Schoenitz, Edward L. Dreyzin. 2021. “Vapor-phase decomposition of dimethyl methylphosphonate (DMMP), a sarin surrogate, in presence of metal oxides.” Defence Technology, vol. 17, no. 4, pp. 1095--1114.
Siva Kumar Valluri, Mirko Schoenitz, Edward Dreizin. 2020. “Bismuth fluoride-coated boron powders as enhanced fuels.” Combustion and Flame, vol. 221, pp. 1--10.
Mehnaz Mursalat, Mirko Schoenitz, Edward L Dreizin. 2020. “Custom particle morphology in energetic nanocomposites prepared by arrested reactive milling in immiscible liquids.” Powder Technology, vol. 359, pp. 238--246.
Siva Kumar Valluri, Karthick Kumarasen Ravi, Mirko Schoenitz, Edward L Dreizin. 2020. “Effect of boron content in B\textperiodcentered BiF3 and B\textperiodcentered Bi composites on their ignition and combustion.” Combustion and Flame, vol. 215, pp. 78--85.
Mehnaz Mursalat, Mirko Schoenitz, Edward L Dreizin. 2020. “Effect of premilling Al and CuO in acetonitrile on properties of Al\textperiodcentered CuO thermites prepared by arrested reactive milling.” Combustion and Flame, vol. 214, pp. 57--64.
Ashvin Kumar Vasudevan, Mirko Schoenitz, Edward L Dreizin. 2020. “Mechanochemical nitration of toluene with metal oxide catalysts.” Applied Catalysis A: General, pp. 117604.
Mehnaz Mursalat, Daniel L Hastings, Mirko Schoenitz, Edward L Dreizin. 2020. “Microspheres with Diverse Material Compositions Can be Prepared by Mechanical Milling.” Advanced Engineering Materials, vol. 22, no. 3, pp. 1901204.
Yalun Sun, Hui Ren, Qingjie Jiao, Mirko Schoenitz, Edward L Dreizin. 2020. “Oxidation, ignition and combustion behaviors of differently prepared boron-magnesium composites.” Combustion and Flame, vol. 221, pp. 11--19.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2020. “Preparation and characterization of silicon-metal fluoride reactive composites.” Nanomaterials, vol. 10, no. 12, pp. 2367.
DL Hastings, Mirko Schoenitz, Kaleigh M Ryan, Edward L Dreizin, Joseph W Krumpfer. 2020. “Stability and Ignition of a Siloxane-Coated Magnesium Powder.” Propellants, Explosives, Pyrotechnics, vol. 45, no. 4, pp. 621--627.
Shomik Mukhopadhyay, Mirko Schoenitz, Edward L Dreizin. 2020. “Vapor-phase decomposition of dimethyl methylphosphonate (DMMP), a sarin surrogate, in presence of metal oxides.” Defence Technology.
Daniel Hastings, Mirko Schoenitz, Edward L Dreizin. 2020. “Zirconium-boron reactive composite powders prepared by arrested reactive milling.” Journal of Energetic Materials, vol. 38, no. 2, pp. 142--161.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Boron doped with iron: Preparation and combustion in air.” Combustion and Flame, vol. 200, pp. 286--295.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Boron-Metal Fluoride Reactive Composites: Preparation and Reactions Leading to Their Ignition.” Journal of Propulsion and Power, vol. 35, no. 4, pp. 802--810.
I Monk, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Combustion of a rapidly initiated fully dense nanocomposite Al--CuO thermite powder.” Combustion Theory and Modelling, pp. 1--23.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Combustion of Aluminum-metal Fluoride Reactive Composites in Different Environments.” Propellants, Explosives, Pyrotechnics.
Mehnaz Mursalat, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Composite Al∙ Ti powders prepared by high-energy milling with different process controls agents.” Advanced Powder Technology, vol. 30, no. 7, pp. 1319--1328.
Ci Huang, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Displacement of powders from surface by shock and plasma generated by electrostatic discharge.” Journal of Electrostatics, vol. 100, pp. 103353.
Edward L Dreizin. 2019. “Effect of liquid process control agent on structure and morphology of reactive materials prepared by high-energy milling.” Bulletin of the American Physical Society, vol. 64.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L Dreizin. 2019. “Effect of Purity, Surface Modification and Iron Coating on Ignition and Combustion of Boron in Air.” Combustion Science and Technology, pp. 1--20.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Fluorine-containing oxidizers for metal fuels in energetic formulations.” Defence Technology, vol. 15, no. 1, pp. 1--22.
Siva K Valluri, Daniela Bushiri, Mirko Schoenitz, Edward Dreizin. 2019. “Fuel-rich aluminum--nickel fluoride reactive composites.” Combustion and Flame, vol. 210, pp. 439--453.
Kerri-Lee Chintersingh, Yalun Sun, Mirko Schoenitz, Edward L Dreizin. 2019. “Heterogeneous reaction kinetics for oxidation and combustion of boron.” Thermochimica Acta, vol. 682, pp. 178415.
Xinhang Liu, Adam Sims, Chris Murzyn, Nick G Glumac, Edward L Dreizin. 2019. “Iodine Release by Combustion of Composite Mg∙ Ca (IO3) 2 Powder.” Combustion Science and Technology, pp. 1--13.
Xinhang Liu, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Preparation, ignition, and combustion of magnesium-calcium iodate reactive nano-composite powders.” Chemical Engineering Journal, vol. 359, pp. 955--962.
Yalun Sun, Kerri-Lee L Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Reactive Shell Model For Boron Oxidation.” The Journal of Physical Chemistry C.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L Dreizin. 2019. “Transition Metal Catalysts for Boron Combustion.” Combustion Science and Technology, pp. 1--25.
Kerri Lee Chintersingh, Yalun Sun, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Heterogeneous reaction kinetics for oxidation and combustion of boron.” Thermochimica Acta, vol. 682.
Yalun Sun, Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Reactive Shell Model for Boron Oxidation.” Journal of Physical Chemistry C, vol. 123, no. 18, pp. 11807-11813.
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2019. “Boron doped with iron: Preparation and combustion in air.” Combustion and Flame, vol. 200, pp. 286-295.
Song Wang, Mirko Schoenitz, Sergey A Grinshpun, Michael Yermakov, Edward L Dreizin. 2018. “Biocidal effectiveness of combustion products of iodine-bearing reactive materials against aerosolized bacterial spores.” Journal of Aerosol Science, vol. 116, pp. 106--115.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L Dreizin. 2018. “Combustion of boron and boron--iron composite particles in different oxidizers.” Combustion and Flame, vol. 192, pp. 44--58.
Ian Monk, Mirko Schoenitz, Edward L. Dreyzin. 2018. “Combustion of Magnesium-Sulfur Composite Particles Ignited by Different Stimuli.” Propellants, Explosives, Pyrotechnics, vol. 43, no. 11, pp. 1178--1183.
Xinhang Liu, Mirko Schoenitz, Edward L Dreizin. 2018. “Combustion of Mg and composite Mg\textperiodcentered S powders in different oxidizers.” Combustion and Flame.
Oleg S Lagoviyer, Mirko Schoenitz, Edward L Dreizin. 2018. “Effect of milling temperature on structure and reactivity of Al--Ni composites.” Journal of Materials Science, vol. 53, no. 2, pp. 1178--1190.
Oleg S Lagoviyer, Mirko Schoenitz, Edward L. Dreyzin. 2018. “Effect of process parameters on mechanochemical nitration of toluene.” Journal of materials science, vol. 53, no. 19, pp. 13690--13700.
Siva Kumar Valluri, Mirko Schoenitz, Edward Dreizin. 2018. “Fluorine-containing oxidizers for metal fuels in energetic formulations.” Defence Technology.
Daniel L Hastings, Mirko Schoenitz, Edward L Dreizin. 2018. “High density reactive composite powders.” Journal of Alloys and Compounds, vol. 735, pp. 1863--1870.
Worrawit Nakpan, Sergey A Grinshpun, Michael Yermakov, Reshmi Indugula, Tiina Reponen, Song Wang, Mirko Schoenitz, Edward L Dreizin. 2018. “Inactivation of aerosolized surrogates of Bacillus anthracis spores by combustion products of aluminum-and magnesium-based reactive materials: Effect of exposure time.” Aerosol Science and Technology, vol. 52, no. 5, pp. 579--587.
Oleg S Lagoviyer, Larisa Krishtopa, Mirko Schoenitz, Nirupam J Trivedi, Edward L Dreizin. 2018. “Mechanochemical nitration of aromatic compounds.” Journal of Energetic Materials, vol. 36, no. 2, pp. 191--201.
Quang Nguyen, Ci Huang, Mirko Schoenitz, Kyle T Sullivan, Edward L Dreizin. 2018. “Nanocomposite thermite powders with improved flowability prepared by mechanical milling.” Powder Technology, vol. 327, pp. 368--380.
Daniel L Hastings, Edward L Dreizin. 2018. “Reactive structural materials: Preparation and characterization.” Advanced Engineering Materials, vol. 20, no. 3, pp. 1700631.
Edward Dreizin, Oleg Shlomo Lagoviyer, Mirko Schoenitz. 2018. “SERDP Project WP-2748.” .
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2018. “Combustion of boron and boron–iron composite particles in different oxidizers.” Combustion and Flame, vol. 192, pp. 44-58.
Xuan Liu, Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2018. “Reactive composite boron - Magnesium powders prepared by mechanical milling.” Journal of Propulsion and Power, vol. 34, no. 3, pp. 787-794.
Sergey A Grinshpun, Michael Yermakov, Reshmi Indugula, Ani Abraham, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Aluminum-based materials for inactivation of aerosolized spores of Bacillus anthracis surrogates.” Aerosol Science and Technology, vol. 51, no. 2, pp. 224–234.
Xinhang Liu, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Boron-based reactive materials with high concentrations of iodine as a biocidal additive.” Chemical Engineering Journal, vol. 325, pp. 495–501.
I Monk, M Schoenitz, RJ Jacob, Edward L. Dreyzin, MR Zachariah. 2017. “Combustion characteristics of stoichiometric Al-CuO nanocomposite thermites prepared by different methods.” Combustion Science and Technology, vol. 189, no. 3, pp. 555–574.
Song Wang, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Combustion of boron and boron-containing reactive composites in laminar and turbulent air flows.” Combustion Science and Technology, vol. 189, no. 4, pp. 683–697.
Xinhang Liu, John Gonzales, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Effect of purity and surface modification on stability and oxidation kinetics of boron powders.” Thermochimica Acta, vol. 652, pp. 17–23.
Siva Kumar Valluri, Ian Monk, Mirko Schoenitz, Edward L Dreizin. 2017. “FUEL-RICH ALUMINUM- METAL FLUORIDE THERMITES.” International Journal of Energetic Materials and Chemical Propulsion, vol. 16, no. 1.
Edward L. Dreyzin, Mirko Schoenitz. 2017. “Mechanochemically prepared reactive and energetic materials: a review.” Journal of Materials Science, pp. 1–21.
Siva Kumar Valluri, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Metal-rich aluminum–polytetrafluoroethylene reactive composite powders prepared by mechanical milling at different temperatures.” Journal of Materials Science, vol. 52, no. 12, pp. 7452–7465.
I Monk, M Schoenitz, Edward L. Dreyzin. 2017. “Modes of ignition of powder layers of nanocomposite thermites by electrostatic discharge.” Journal of Energetic Materials, vol. 35, no. 1, pp. 29–43.
Song Wang, Xinhang Liu, Mirko Schoenitz, Edward L. Dreyzin. 2017. “Nanocomposite Thermites with Calcium Iodate Oxidizer.” Propellants, Explosives, Pyrotechnics, vol. 42, no. 3, pp. 284–292.
X Liu, K-L Chintersingh, Mirko Schoenitz, EL Dreizin. 2017. “Reactive Composite Boron--Magnesium Powders Prepared by Mechanical Milling.” Journal of Propulsion and Power, vol. 34, no. 3, pp. 787--794.
Ian Monk, Mirko Schoenitz, Edward L. Dreyzin. 2017. “The effect of heating rate on combustion of fully dense nanocomposite thermite particles.” Combustion Science and Technology, no. just-accepted.
Ani Abraham, Hongqi Nie, Mirko Schoenitz, Alexander B Vorozhtsov, Marat Lerner, Alexander Pervikov, Nikolay Rodkevich, Edward L. Dreyzin. 2016. “Bimetal Al–Ni nano-powders for energetic formulations.” Combustion and Flame, vol. 173, pp. 179–186.
Kerri-Lee Chintersingh, Quang Nguyen, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Combustion of boron particles in products of an air–acetylene flame.” Combustion and Flame, vol. 172, pp. 194–205.
Sergio E Guerrero, Edward L. Dreyzin, Evgeny Shafirovich. 2016. “Combustion of thermite mixtures based on mechanically alloyed aluminum–iodine material.” Combustion and Flame, vol. 164, pp. 164–166.
Song Wang, Salil Mohan, Edward L. Dreyzin. 2016. “Effect of flow conditions on burn rates of metal particles.” Combustion and Flame, vol. 168, pp. 10–19.
Ani Abraham, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Energy storage materials with oxide-encapsulated inclusions of low melting metal.” Acta Materialia, vol. 107, pp. 254–260.
Song Wang, Ani Abraham, Ziyue Zhong, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Ignition and combustion of boron-based Al B I 2 and Mg B I 2 composites.” Chemical Engineering Journal, vol. 293, pp. 112–117.
Hongqi Nie, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Initial stages of oxidation of aluminum powder in oxygen.” Journal of Thermal Analysis and Calorimetry, pp. 1–13.
Song Wang, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Mechanically alloyed magnesium–boron–iodine composite powders.” Journal of Materials Science, vol. 51, no. 7, pp. 3585–3591.
Kerri-Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Oxidation kinetics and combustion of boron particles with modified surface.” Combustion and Flame, vol. 173, pp. 288–295.
Hongqi Nie, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Oxidation of differently prepared Al-Mg alloy powders in oxygen.” Journal of Alloys and Compounds, vol. 685, pp. 402–410.
Hongqi Nie, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Oxidation of magnesium: implication for aging and ignition.” The Journal of Physical Chemistry C, vol. 120, no. 2, pp. 974–983.
AB Vorozhtsov, M Lerner, N Rodkevich, H Nie, A Abraham, M Schoenitz, Edward L. Dreyzin. 2016. “Oxidation of nano-sized aluminum powders.” Thermochimica Acta, vol. 636, pp. 48–56.
Ani Abraham, Ziyue Zhong, Ruodong Liu, Sergey A Grinshpun, Michael Yermakov, Reshmi Indugula, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Preparation, Ignition, and Combustion of Mg S Reactive Nanocomposites.” Combustion Science and Technology, no. just-accepted.
Jose Guadarrama, Edward L. Dreyzin, Nick Glumac. 2016. “Reactive Liners Prepared Using Powders of Aluminum and Aluminum-Magnesium Alloys.” Propellants, Explosives, Pyrotechnics.
Ani Abraham, Natalia A MacDonald, Edward L. Dreyzin. 2016. “Reactive Materials for Evaporating Samarium.” Propellants, Explosives, Pyrotechnics.
Kerri Lee Chintersingh, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Oxidation kinetics and combustion of boron particles with modified surface.” Combustion and Flame, vol. 173, pp. 288-295.
Kerri Lee Chintersingh, Quang Nguyen, Mirko Schoenitz, Edward L. Dreyzin. 2016. “Combustion of boron particles in products of an air–acetylene flame.” Combustion and Flame, vol. 172, pp. 194-205.
Marco A Machado, Daniel A Rodriguez, Edward L Dreizin, Evgeny Shafirovich. 2015. “Chemical Gas Generators Based on Mechanically Alloyed Al Mg Powder.” MRS Proceedings, vol. 1758, pp. mrsf14–1758.
Ani Abraham, Nicholas W Piekiel, Christopher J Morris, Edward L Dreizin. 2015. “Combustion of Energetic Porous Silicon Composites Containing Different Oxidizers.” Propellants, Explosives, Pyrotechnics.
Song Wang, Amy L Corcoran, Edward L Dreizin. 2015. “Combustion of magnesium powders in products of an air/acetylene flame.” Combustion and Flame, vol. 162, no. 4, pp. 1316–1325.
Danielle Quijano, Amy L Corcoran, Edward L Dreizin. 2015. “Combustion of Mechanically Alloyed Aluminum-Magnesium Powders in Steam.” Propellants, Explosives, Pyrotechnics, vol. 40, no. 5, pp. 749–754.
Amy L Corcoran, Song Wang, Yasmine Aly, Edward L Dreizin. 2015. “Combustion of Mechanically Alloyed Al∙ Mg Powders in Products of a Hydrocarbon Flame.” Combustion Science and Technology, vol. 187, no. 5, pp. 807–825.
Edward L Dreizin, Mirko Schoenitz. 2015. “Correlating ignition mechanisms of aluminum-based reactive materials with thermoanalytical measurements.” Progress in Energy and Combustion Science, vol. 50, pp. 81–105.
EL Dreizin, DJ Allen, NG Glumac. 2015. “Depression of melting point for protective aluminum oxide films.” Chemical Physics Letters, vol. 618, pp. 63–65.
Ani Abraham, John Obamedo, Mirko Schoenitz, Edward L Dreizin. 2015. “Effect of composition on properties of reactive Al B I 2 powders prepared by mechanical milling.” Journal of Physics and Chemistry of Solids, vol. 83, pp. 1–7.
Ian Monk, Rayon Williams, Xinhang Liu, Edward L Dreizin. 2015. “Electro-static discharge ignition of monolayers of nanocomposite thermite powders prepared by arrested reactive milling.” Combustion Science and Technology, vol. 187, no. 8, pp. 1276–1294.
Daniel A Rodriguez, Edward L Dreizin, Evgeny Shafirovich. 2015. “Hydrogen generation from ammonia borane and water through combustion reactions with mechanically alloyed Al Mg powder.” Combustion and Flame, vol. 162, no. 4, pp. 1498–1506.
Yasmine Aly, Edward L Dreizin. 2015. “Ignition and combustion of Al Mg alloy powders prepared by different techniques.” Combustion and Flame, vol. 162, no. 4, pp. 1440–1447.
Song Wang, Amy Corcoran, Victoria Leybova, Edward L Dreizin. 2015. “Metal-Based Iodine Bearing Materials Prepared by Mechanical Milling.” MRS Proceedings, vol. 1758, pp. mrsf14–1758.
Ani Abraham, Nicholas W Piekiel, Cory R Knick, Christopher J Morris, Edward Dreizin. 2015. “Quantification of Oxidizer Systems for Porous Silicon Combustion.” MRS Proceedings, vol. 1758, pp. mrsf14–1758.
Ani Abraham, Shasha Zhang, Yasmine Aly, Mirko Schoenitz, Edward L Dreizin. 2014. “Aluminum–Iodoform Composite Reactive Material.” Advanced Engineering Materials.
Edward L Dreizin. 2014. “Effect of surface tension on the temperature of burning metal droplets.” Combustion and Flame.
Travis R Sippel, Steven F Son, Lori J Groven, Shasha Zhang, EL Dreizin. 2014. “Exploring mechanisms for agglomerate reduction in composite solid propellants with polyethylene inclusion modified aluminum.” Combustion and Flame.
Rayon A Williams, Jaymin V Patel, Edward L Dreizin. 2014. “Ignition of Fully Dense Nanocomposite Thermite Powders by an Electric Spark.” Journal of Propulsion and Power, vol. 30, no. 3, pp. 765–774.
William L Shaw, Dana D Dlott, Rayon A Williams, Edward L Dreizin. 2014. “Ignition of Nanocomposite Thermites by Electric Spark and Shock Wave.” Propellants, Explosives, Pyrotechnics.
Y Aly, S Zhang, M Schoenitz, VK Hoffmann, EL Dreizin, M Yermakov, R Indugula, SA Grinshpun. 2014. “Iodine-containing aluminum-based fuels for inactivation of bioaerosols.” Combustion and Flame, vol. 161, no. 1, pp. 303–310.
Shashank Vummidi Lakshman, Salil Mohan, Edward L Dreizin, Mirko Schoenitz. 2014. “Kinetics of thermal decomposition of a synthetic K–H3O jarosite analog.” Journal of Thermal Analysis and Calorimetry, vol. 115, no. 1, pp. 609–620.
Rayon A Williams, Mirko Schoenitz, Alexandre Ermoline, Edward L Dreizin. 2014. “Low-temperature exothermic reactions in fully-dense Al/MoO 3 nanocomposite powders.” Thermochimica Acta, vol. 594, pp. 1–10.
Rayon A Williams, Mirko Schoenitz, Alexandre Ermoline, Edward L Dreizin. 2014. “Low-temperature exothermic reactions in fully-dense Al/MoO< sub> 3 nanocomposite powders.” Thermochimica Acta.
Marco A Machado, Daniel A Rodriguez, Yasmine Aly, Mirko Schoenitz, Edward L Dreizin, Evgeny Shafirovich. 2014. “Nanocomposite and mechanically alloyed reactive materials as energetic additives in chemical oxygen generators.” Combustion and Flame.
Edward L Dreizin, Mirko Schoenitz. 2014. “Reactive and Metastable Nanomaterials Prepared by Mechanical Milling.” Metal Nanopowders: Production, Characterization, and Energetic Applications, pp. 227–278.
WL Shaw, RA Williams, EL Dreizin, DD Dlott. 2014. “Using laser-driven flyer plates to study the shock initiation of nanoenergetic materials.” Journal of Physics: Conference Series, vol. 500, no. 18, pp. 182010.
Rayon A Williams, Mirko Schoenitz, Edward L Dreizin. 2014. “Validation of the Thermal Oxidation Model for Al/CuO Nanocomposite Powder.” Combustion Science and Technology, vol. 186, no. 1, pp. 47–67.
Shashank Vummidi Lakshman, Edward L Dreizin, Mirko Schoenitz. 2014. “Evaluation of K–H3O jarosite as thermal witness material.” Journal of Thermal Analysis and Calorimetry, vol. 117, pp. 141-149.
Shashank Vummidi Lakshman, Salil Mohan, Edward L Dreizin, Mirko Schoenitz. 2014. “Kinetics of thermal decomposition of a synthetic K–H3O jarosite analog.” Journal of Thermal Analysis and Calorimetry, vol. 115, pp. 609-620.
Amy Corcoran, Stefano Mercati, Hongqi Nie, Massimo Milani, Luca Montorsi, Edward L Dreizin. 2013. “Combustion of fine aluminum and magnesium powders in water.” Combustion and Flame.
Carlo Badiola, Edward L Dreizin. 2013. “Combustion of micron-sized particles of titanium and zirconium.” Proceedings of the Combustion Institute, vol. 34, no. 2, pp. 2237–2243.
Rayon A Williams, Jaymin V Patel, Alexandre Ermoline, Mirko Schoenitz, Edward L Dreizin. 2013. “Correlation of optical emission and pressure generated upon ignition of fully-dense nanocomposite thermite powders.” Combustion and Flame.
Priya R Santhanam, Alexandre Ermoline, Edward L Dreizin. 2013. “Discrete element model for an attritor mill with impeller responding to interactions with milling balls.” Chemical Engineering Science, vol. 101, pp. 366–373.
Yasmine Aly, Mirko Schoenitz, Edward L Dreizin. 2013. “Ignition and combustion of mechanically alloyed Al–Mg powders with customized particle sizes.” Combustion and Flame.
Y Aly, S Zhang, M Schoenitz, VK Hoffmann, EL Dreizin, M Yermakov, R Indugula, SA Grinshpun. 2013. “Iodine-containing aluminum-based fuels for inactivation of bioaerosols.” Combustion and Flame.
Alexandre Ermoline, Deniz Yildiz, Edward L Dreizin. 2013. “Model of heterogeneous combustion of small particles.” Combustion and Flame, vol. 160, no. 12, pp. 2982–2989.
Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2013. “Nano-structured Aluminum Powders with Modified Protective Surface Layers.” MRS Online Proceedings Library, vol. 1521.
Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2013. “Nearly Pure Aluminum Powders with Modified Protective Surface.” Combustion Science and Technology, vol. 185, no. 9, pp. 1360–1377.
Yasmine Aly, Vern K Hoffman, Mirko Schoenitz, Edward L Dreizin. 2013. “Preparation, ignition, and combustion of mechanically alloyed Al-Mg powders with customized particle sizes.” MRS Online Proceedings Library, vol. 1521.
Hongqi Nie, Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2013. “Reaction interface between aluminum and water.” International Journal of Hydrogen Energy, vol. 38, no. 26, pp. 11222–11232.
Shasha Zhang, Edward L Dreizin. 2013. “Reaction Interface for Heterogeneous Oxidation of Aluminum Powders.” The Journal of Physical Chemistry C, vol. 117, no. 27, pp. 14025–14031.
Yasmine Aly, Vern K Hoffman, Mirko Schoenitz, Edward L Dreizin. 2013. “Reactive, Mechanically Alloyed Al Mg Powders with Customized Particle Sizes and Compositions.” Journal of Propulsion and Power, vol. 30, no. 1, pp. 96–104.
Marco A Machado, Daniel A Rodriguez, Evgeny Shafirovich, Edward L Dreizin. 2013. “Selection of Nanocomposite Reactive Materials for Using in Oxygen and Hydrogen Generators.” .
Rayon A Williams, Mirko Schoenitz, Edward L Dreizin. 2013. “Validation of the Thermal Oxidation Model for AlCuO Nanocomposite Powder.” Combustion Science and Technology, no. just-accepted.
D Stamatis, A Ermoline, EL Dreizin. 2012. “A multi-step reaction model for ignition of fully-dense Al-CuO nanocomposite powders.” Combustion Theory and Modelling, vol. 16, no. 6, pp. 1011–1028.
Amy L Corcoran, Vern K Hoffmann, Edward L Dreizin. 2012. “Aluminum particle combustion in turbulent flames.” Combustion and Flame.
Sergey A Grinshpun, Atin Adhikari, Michael Yermakov, Tiina Reponen, Edward Dreizin, Mirko Schoenitz, Vern Hoffmann, Shasha Zhang. 2012. “Inactivation of Aerosolized Bacillus atrophaeus (BG) Endospores and MS2 Viruses by Combustion of Reactive Materials.” Environmental science & technology, vol. 46, no. 13, pp. 7334–7341.
Edward L Dreizin, others. 2012. “Laminar Lifted Flame Speed Measurements for Aerosols of Metals and Mechanical Alloys.” AIAA Journal, vol. 42, no. 7.
Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2012. “Metastable Aluminum-based Reactive Composite Materials Prepared by Cryomilling.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
E Beloni, EL Dreizin. 2012. “Model of heating and ignition of conductive polydisperse powder in electrostatic discharge.” Combustion Theory and Modelling, vol. 16, no. 6, pp. 976–993.
Rayon A Williams, Mirko Schoenitz, Alexandre Ermoline, Edward L Dreizin. 2012. “On Gas Release by Thermally-Initiated Fully-Dense 2Al. 3CuO Nanocomposite Powder.” International Journal of Energetic Materials and Chemical Propulsion, vol. 11, no. 3.
Carlo Badiola, Edward L Dreizin. 2012. “On weak effect of particle size on its burn time for micron-sized aluminum powders.” Combustion Science and Technology, vol. 184, no. 12, pp. 1993–2007.
Shasha Zhang, Carlo Badiola, Mirko Schoenitz, Edward L Dreizin. 2012. “Oxidation, ignition, and combustion of Al I< sub> 2 composite powders.” Combustion and Flame, vol. 159, no. 5, pp. 1980–1986.
Priya R Santhanam, Edward L Dreizin. 2012. “Real time indicators of material refinement in an attritor mill.” AIChE Journal.
Edward L Dreizin, others. 2012. “Thermal Initiation of Al-MoO3 Nanocomposite Materials Prepared by Different Methods.” Journal of Propulsion and Power, vol. 27, no. 5.
Sergey A Grinshpun, A Adhikari, Michael Yermakov, Tiina Reponen, Edward L. Dreyzin, Mirko Schoenitz, Vern Hoffmann, Shasha Zhang. 2012. “Inactivation of Aerosolized BG Endospores and MS2 Viruses by Combustion of Reactive Materials.” Environmental Science and Technology, vol. 46, no. 13, pp. 7334-7341.
Hongqi Nie, Mirko Schoenitz, Edward L. Dreyzin. 2012. “Calorimetric investigation of the aluminum–water reaction.” International Journal of Hydrogen Energy, vol. 37, no. 15, pp. 11035-11045.
Edward L. Dreyzin, Priya Santhanam. 2012. “Predicting conditions for scaled-up manufacturing of materials prepared by ball milling.” Powder Technology, vol. 221, pp. 403-411.
Shasha Zhang, Carlo Badiol, Mirko Schoenitz, Edward L. Dreyzin. 2012. “Oxidation, Ignition, and Combustion of Al•I2 Composite Powders.” Combustion and Flame, vol. 159, pp. 1980-1986.
Salil Mohan, Alexandre Ermoline, Edward L. Dreyzin. 2012. “Pyrophoricity of nano-sized aluminum particles.” Journal of Nanoparticle Research, vol. 14, pp. 723-729.
Ervin Beloni, Priya Santhanam, Edward L. Dreyzin. 2012. “Electrical conductivity of a metal powder struck by a spark.” Journal of Electrostatics, vol. 70, no. 1, pp. 157-165.
Rayon Williams, Ervin Beloni, Edward L. Dreyzin. 2012. “Ignition of Metal Powder Layers of Different Thickness by Electrostatic Discharge..” Journal of Propulsion and Power, vol. 28, no. 1, pp. 132-139.
Alexandre Ermoline, Demitrios Stamatis, Edward L. Dreyzin. 2012. “Low-temperature exothermic reactions in fully dense Al–CuO nanocomposite powders.” Thermochimica Acta , vol. 527, pp. 52-58.
Sergey A Grinshpun, Michael Yermakov, Reshmi Indugula, Atin Adhikari, Tiina Reponen, Shasha Zhang, Vern Hoffmann, Mirko Schoenitz, Edward Dreizin. 2011. “How Combustion of Energetic Materials Affects Viability of Aerosolized Bio-agents.” 第七届亚洲气溶胶会议论文集.
Edward L Dreizin, Carlo Badiola, Shasha Zhang, Yasmine Aly. 2011. “Particle combustion dynamics of metal-based reactive materials.” International Journal of Energetic Materials and Chemical Propulsion, vol. 10, no. 4.
Yasmine Aly, Demitrios Stamatis, Carlo Badiola, Edward L Dreizin. 2011. “Ternary Reactive Nanocomposite Powders.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Edward L. Dreyzin, Demitrios Stamatis, Kelvin Higa. 2011. “Thermal initiation of Al-MoO3 nanocomposite materials prepared by different methods.” Journal of Propulsion and Power, vol. 27, no. 5, pp. 1079-1087 .
Edward L. Dreyzin, Yasmine Aly, Mirko Schoenitz. 2011. “Aluminum-Metal Reactive Composites.” Combustion Science and Technology, vol. 183, pp. 1107–1132 .
Edward L. Dreyzin, Carlo Badiola, Robert Gill. 2011. “Combustion characteristics of micron-sized aluminum particles in oxygenated environments.” Combustion and Flame , vol. 158, pp. 2064–2070 .
Edward L. Dreyzin, Ervin Beloni. 2011. “Ignition of Titanium Powder Layers by Electrostatic Discharge.” Combustion Science and Technology, vol. 183, pp. 823–845 .
Edward L. Dreyzin, Alexandre Ermoline. 2011. “Equations for the Cabrera-Mott kinetics of oxidation for spherical nanoparticles.” Chemical Physics Letters , vol. 505, no. 1-3, pp. 47-50 .
Edward L. Dreyzin, Paul Dupiano, Demitrios Stamatis. 2011. “Hydrogen production by reacting water with mechanically milled composite aluminum-metal oxide powders.” International Journal of Hydrogen Energy , vol. 36, pp. 4781 – 4791 .
Edward L. Dreyzin, Demitrios Stamatis, X Zhu, Mirko Schoenitz, Paul Redner. 2011. “Consolidation and mechanical properties of reactive nanocomposite powders..” Powder Technology , vol. 208, pp. pp. 637–642.
Edward L. Dreyzin, Alexandre Ermoline, Mirko Schoenitz. 2011. “Reactions leading to ignition in fully dense nanocomposite Al-oxide systems..” Combustion and Flame, vol. 158, no. 6, pp. 1076–1083 .
Edward L. Dreyzin, Alex Ermoline, Yasmine Aly, M Trunov, Mirko Schoenitz. 2010. “Preparation and Characterization of Granular Hybrid Reactive Materials.” International Journal of Energetic Materials and Chemical Propulsion , vol. 9, no. 3, pp. 267–284 .
Laila Jallo, Mirko Schoenitz, Edward L. Dreyzin, Rajesh N. Dave, Curtis Johnson. 2010. “The effect of surface modification of aluminum powder on its flowability, combustion and reactivity..” Powder Technology , vol. 204, no. 1, pp. 63-70.
Shashank L Vummidi, Yasmine Aly, Mirko Schoenitz, Edward L Dreizin. 2010. “Characterization of Fine Nickel-Coated Powder as Potential Fuel Additive.” Journal of Propulsion and Power, vol. 26, no. 3, pp. 454–460.
Shasha Zhang, Mirko Schoenitz, Edward L Dreizin. 2010. “Iodine Release, Oxidation, and Ignition of Mechanically Alloyed Al- I Composites.” The Journal of Physical Chemistry C, vol. 114, no. 46, pp. 19653–19659.
Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2010. “Oxidation of Aluminum Particles in Mixed CO2/H2O Atmospheres.” The Journal of Physical Chemistry C, vol. 114, no. 44, pp. 18925–18930.
D Foreign. 2010. “Premature Dissemination for public release.” .
Sergey A Grinshpun, Atin Adhikari, Michael Yermakov, Lauri Reponen, Tiina Reponen, Edward Dreizin, Mirko Schoenitz, Shasha Zhang, Vern Hoffmann. 2010. “Short-term Exposure of Aerosolized Bacillus Endospores to Combustion of Energetic Materials.” American Association for Aerosol Research, Oregon Convention Center, Portland, Oregon, USA http://aaarabstracts. com/2010/.
SA Grinshpun, A Adhikari, C Li, T Reponen, M Yermakov, M Schoenitz, E Dreizin, M Trunov, S Mohan. 2010. “Thermal inactivation of airborne viable< i> Bacillus subtilis spores by short-term exposure in axially heated air flow.” Journal of Aerosol Science, vol. 41, no. 4, pp. 352–363.
R. J. Gill, Carlo Badiola, Edward L. Dreyzin. 2010. “Combustion Times and Emission Profiles of Micron-Sized Aluminum Particles Burning in Different Environments.” Combustion and Flame, vol. 157, no. 11, pp. 2015-2023.
Edward L. Dreyzin, Shasha Zhang, Mirko Schoenitz. 2010. “Iodine Release, Oxidation, and Ignition of Mechanically Alloyed Al−I Composites.” Journal of Physical Chemistry C, vol. 114, no. 46, pp. 19653–19659 .
Sergey Grinshpun, C. Li, A. Adhikari, T. Reponen, M. Yermakov, M. Schoenitz, Edward L. Dreyzin, V. Hoffmann, M. Trunov. 2010. “Method for Studying Survival of Airborne Viable Microorganisms in Combustion Environments: Development and Evaluation.” Aerosol and Air Quality Research, no. 10, pp. 414-424.
Edward L. Dreyzin, Alexandre Ermolin, M Trunov, Yasmine Aly, Mirko Schoenitz. 2010. “Preparation and Characterization of Granular Hybrid Reactive Materials.” International Journal of Energetic Materials and Chemical Propulsion , vol. 9, no. 3, pp. 267–284 .
Edward L. Dreyzin, Shasha Zhang, Mirko Schoenitz. 2010. “Iodine Release, Oxidation, and Ignition of Mechanically Alloyed Al−I Composites.” Journal of Physical Chemistry C, vol. 114, no. 46, pp. 19653–19659 .
Mirko Schoenitz, Bhavita Patel, O Agboh, Edward L. Dreyzin. 2010. “Oxidation of aluminum powders at high heating rates.” Thermochimica Acta , vol. 507-508, pp. 115-122.
S Mohan, L Furet, Edward L. Dreyzin. 2010. “Aluminum Particle Ignition in Different Oxidizing Environments.” Combustion and Flame, vol. 157, pp. 1356-1363.
Laila Jallo, Mirko Schoenitz, Edward L. Dreyzin, Rajesh N. Dave, Curtis Johnson. 2010. “The effect of surface modification of aluminum powder on its flowability, combustion and reactivity..” Powder Technology , vol. 204, no. 1, pp. 63-70.
Edward L. Dreyzin, S. Vummidi, Y Aly, M Schoenitz. 2010. “Characterization of fine aluminum powder coated with nickel as a potential fuel additive..” Journal of Propulsion and Power, vol. 26, no. 3, pp. 454-460.
Shasha Zhang, Mirko Schoenitz, Edward L. Dreyzin. 2010. “Mechanically alloyed Al–I composite materials .” Journal of Physics and Chemistry of Solids , vol. 71, pp. 1213-1220.
S Grinshpun, A Adhikari, C. Li, M Yermakov, T. Reponen, M Schoenitz, Edward L. Dreyzin, M Trunov, S Mohan. 2010. “Thermal inactivation of airborne viable Bacillus subtilis spores by short-term exposure in axially heated air flow.” Journal of Aerosol Science, vol. 41, pp. 352-363.
Demitrios Stamatis, X. Jiang, Ervin Beloni, Edward L. Dreyzin. 2010. “Aluminum Burn Rate Modifiers Based on Reactive Nanocomposite Powders..” Propellants Explosives and Pyrotechnics, vol. 35, pp. 260-267.
Edward L. Dreyzin, Ervin Beloni. 2010. “Ignition of Aluminum Powders by Electro-Static Discharge.” Combustion and Flame, vol. 157, pp. 1346-1355.
Priya R Santhanam, Vern Hofmann, M. Trunov, Edward L. Dreyzin. 2009. “Characteristics of aluminum combustion obtained from constant volume explosion experiments.” Characteristics of aluminum combustion obtained from constant volume explosion experiments, vol. 182, pp. 904-921.
Salil Mohan, Edward L Dreizin. 2009. “Aluminum Particle Ignition in Mixed Environments.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2009. “Aluminum Powder Oxidation in CO2 and Mixed CO2/O2 Environments.” The Journal of Physical Chemistry C, vol. 113, no. 16, pp. 6768–6773.
Carlo Badiola, Mirko Schoenitz, Xiaoying Zhu, Edward L Dreizin. 2009. “Aluminum Rich Al-CuO Nanocomposite Materials Prepared by Arrested Reactive Milling at Cryogenic and Room Temperatures.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Demitrios Stamatis, Xiaoying Zhu, Alexandre Ermoline, Mirko Schoenitz, Edward L Dreizin, Paul Redner. 2009. “Consolidation of reactive nanocomposite powders.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Ervin Beloni, Edward L Dreizin. 2009. “Experimental study of ignition of magnesium powder by electrostatic discharge.” Combustion and Flame, vol. 156, no. 7, pp. 1386–1395.
Ervin Beloni, Edward L Dreizin. 2009. “Ignition of Different Size Al Particles in a Powder Bed by Electro-Static Discharge (ESD) Stimulation.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Carlo Badiola, Mirko Schoenitz, Edward L Dreizin. 2009. “Mechanically Alloyed Al-Ti Powders Prepared by Mechanical Milling at Cryogenic Temperatures.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Edward L Dreizin. 2009. “Metal-based reactive nanomaterials.” Progress in Energy and Combustion Science, vol. 35, no. 2, pp. 141–167.
Salil Mohan, Mikhaylo A Trunov, Edward L Dreizin. 2009. “On possibility of vapor-phase combustion for fine aluminum particles.” Combustion and Flame, vol. 156, no. 11, pp. 2213–2216.
Mirko Schoenitz, Chi-Mon Chen, Edward L Dreizin. 2009. “Oxidation of aluminum particles in the presence of water.” The Journal of Physical Chemistry B, vol. 113, no. 15, pp. 5136–5140.
Edward Dreizin. 2009. “Training Graduate Students in the Area of Novel Reactive Nanomaterials.” .
Edward L. Dreyzin, Carlo Badiola, Xiaoying Zhu, Mirko Schoenitz. 2009. “Nanocomposite thermite powders prepared by cryomilling.” Journal of Alloys and Compounds, vol. 488, pp. 386-391.
Carlo Badiola, Mirko Schoenitz, Xiaoying Zhu, Edward L. Dreyzin. 2009. “Nanocomposite thermite powders prepared by cryomilling.” Journal of Alloys and Compounds , vol. 488, pp. 386-391.
Salil lMohan, Luc Furet Furet, Edward L. Dreyzin, . 2009. “On possibility of vapor-phase combustion for fine aluminum particles.” Combustion and Flame , vol. 156, no. 11, pp. 2213-2216 .
Edward L. Dreyzin, Robert Gill, Salil Mohan. 2009. “Sizing and Burn Time Measurements of Micron-Sized Metal Powders.” Review of Scientific Instruments , vol. 80, pp. 064101-1 – 064101-7 .
Edward L. Dreyzin, Ervin Beloni. 2009. “Experimental study of ignition of magnesium powder by electro-static discharge.” Combustion and Flame, vol. 156, no. 7, pp. 1386-1395.
Edward L. Dreyzin, Rajesh N. Dave, Mirko Schoenitz, Xianquin Jiang, M Trunov. 2009. “Mechanical alloying and reactive milling in a high energy planetary mill.” Journal of Alloys and Compounds , vol. 478, pp. 246-251.
Swati M Umbrajkar, Soumitri Seshadri, Mirko Schoenitz, Vern K Hoffmann, Edward L Dreizin. 2008. “Aluminum-rich Al-MoO3 nanocomposite powders prepared by arrested reactive milling.” Journal of Propulsion and Power, vol. 24, no. 2, pp. 192–189.
Swati M Umbrajkar, Soumitri Seshadri, Mirko Schoenitz, Vern K Hoffmann, Edward L Dreizin. 2008. “Aluminum-rich Al-MoO3 nanocomposite powders prepared by arrested reactive milling.” Journal of Propulsion and Power, vol. 24, no. 2, pp. 192–189.
Mikhaylo A Trunov, Vern K Hoffmann, Mirko Schoenitz, Edward L Dreizin. 2008. “Combustion of boron-titanium nanocomposite powders in different environments.” Journal of Propulsion and Power, vol. 24, no. 2, pp. 184–191.
Ervin Beloni, Vern K Hoffmann, Edward L Dreizin. 2008. “Combustion of decane-based slurries with metallic fuel additives.” Journal of Propulsion and Power, vol. 24, no. 6, pp. 1403–1411.
Mirko Schoenitz, Demitrios Stamatis, Edward L Dreizin, Sergey A Grinshpun. 2008. “Filled Nanocomposite Materials for Biocidal Applications.” The 2008 Annual Meeting.
Demitrios Stamatis, Zhi Jiang, Vern K Hoffmann, Mirko Schoenitz, Edward L Dreizin. 2008. “Fully dense, aluminum-rich Al-CuO nanocomposite powders for energetic formulations.” Combustion Science and Technology, vol. 181, no. 1, pp. 97–116.
Salil Mohan, Mikhaylo A Trunov, Edward L Dreizin. 2008. “Heating and ignition of metallic particles by a CO2 laser.” Journal of Propulsion and Power, vol. 24, no. 2, pp. 199–205.
Swati M Umbrajkar, Chi-Mon Chen, Mirko Schoenitz, Edward L Dreizin. 2008. “On problems of isoconversion data processing for reactions in Al-rich Al–MoO< sub> 3 thermites.” Thermochimica Acta, vol. 477, no. 1, pp. 1–6.
Mirko Schoenitz, Salil Mohan, Chi-Mon Chen, Edward Dreizin. 2008. “Oxidation and Ignition of Aluminum Particles in the Presence of Water Vapor.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Alexandre Ermoline, Mirko Schoenitz, Mikhaylo A Trunov, Edward L Dreizin. 2008. “Preparation and Characterization of Metal-Bound Hybrid Reactive Particles.” The 2008 Annual Meeting.
Carlo Badiola, Edward L Dreizin, Mirko Schoenitz, Xiaoying Zhu. 2008. “Reactive Nanocomposite Materials Prepared by Cryogenic Milling.” The 2008 Annual Meeting.
Carlo Badiola, Mirko Schoenitz, Edward L Dreizin. 2008. “Synthesis of Aluminum-Rich Nanocomposite Powders at Cryogenic Temperatures.” .
Swati Umbrajkar, Mikhaylo A Trunov, Mirko Schoenitz, Edward L Dreizin, Russell Broad. 2007. “Arrested Reactive Milling Synthesis and Characterization of Sodium-Nitrate Based Reactive Composites.” Propellants, Explosives, Pyrotechnics, vol. 32, no. 1, pp. 32–41.
Curtis E Johnson, Stephen Fallis, Andrew P Chafin, Thomas J Groshens, Kelvin T Higa, Ismail M K. Ismail, Tom W Hawkins. 2007. “Characterization of nanometer-to micron-sized aluminum powders: size distribution from thermogravimetric analysis.” Journal of propulsion and power, vol. 23, no. 4, pp. 669–682.
Soumitri Seshadri, Edward L Dreizin. 2007. “Combustion of off-Stoichiometric AlMoO3 Nano Composite Powders in Dry Air.” The 2007 Annual Meeting.
Kwabena A. Narh, M Khanolkar, S Umbrajkar, E Dreizin. 2007. “EFFECT OF CARBON NANOTUBES ON THE CRYSTALLIZATION BEHAVIOR POLYETHYLENE OXIDE.” ANTEC-CONFERENCE PROCEEDINGS-, vol. 3, pp. 1766.
Mirko Schoenitz, Mikhaylo A Trunov, Chi-Mon Chen, Edward L Dreizin. 2007. “Experimental Investigation of Aluminum Oxidation in Water.” The 2007 Annual Meeting.
Swati M Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2007. “Fuel-rich Al-MoO3 Nanocomposite Powders Prepared by Arrested Reactive Milling.” .
Demitrios Stamatis, Vern K Hoffmann, Mirko Schoenitz, Edward L Dreizin. 2007. “Fully Dense Aluminum Rich Al-Cuo Nanocomposites for Energetic Formulations.” The 2007 Annual Meeting.
S Umbrajkar, Mirko Schoenitz, E Dreizin. 2007. “Heterogeneous Processes Leading To Metal Ignition In Reactive Nanocomposite Materials.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Ervin Beloni, Eric Whitman, Mikhaylo A Trunov, Edward L Dreizin. 2007. “Ignition of Metal Powders by Electric Spark.” The 2007 Annual Meeting.
Mirko Schoenitz, Swati M Umbrajkar, Edward L Dreizin. 2007. “Kinetic analysis of thermite reactions in Al-MoO3 nanocomposites.” Journal of Propulsion and Power, vol. 23, no. 4, pp. 683–687.
X Zhu, M Schoenitz, EL Dreizin. 2007. “Mechanically alloyed Al–Li powders.” Journal of alloys and compounds, vol. 432, no. 1, pp. 111–115.
Mikhaylo A Trunov, Mirko Schoenitz, Edward L Dreizin. 2007. “Modeling of Reduction-Oxidation Reactions in Al-MoO3 Nanocomposite Powders.” The 2007 Annual Meeting.
T Bazyn, GLUMAC*, N, H Krier, TS Ward, M Schoenitz, EL Dreizin. 2007. “Reflected shock ignition and combustion of aluminum and nanocomposite thermite powders.” Combustion science and technology, vol. 179, no. 3, pp. 457–476.
Swati M Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2006. “Control of Structural Refinement and Composition in Al-MoO3 Nanocomposites Prepared by Arrested Reactive Milling.” Propellants, Explosives, Pyrotechnics, vol. 31, no. 5, pp. 382–389.
Mikhaylo A Trunov, M Schoenitz, EL Dreizin. 2006. “Effect of polymorphic phase transformations in alumina layer on ignition of aluminium particles.” Combustion Theory and Modelling, vol. 10, no. 4, pp. 603–623.
Swati M Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2006. “Exothermic reactions in Al–CuO nanocomposites.” Thermochimica acta, vol. 451, no. 1, pp. 34–43.
Trent S Ward, Mikhaylo A Trunov, Mirko Schoenitz, Edward L Dreizin. 2006. “Experimental methodology and heat transfer model for identification of ignition kinetics of powdered fuels.” International journal of heat and mass transfer, vol. 49, no. 25, pp. 4943–4954.
Alexandre Ermoline, Mirko Schoenitz, Edward L Dreizin. 2006. “High-temperature phase equilibria in the system Zr–O–N.” Journal of materials research, vol. 21, no. 02, pp. 320–328.
Salil Mohan, Yuriy L Shoshin, Edward L Dreizin. 2006. “Ignition of Aerosolized Reactive Particles at High Heating Rates.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 896, pp. 165.
Yuriy L Shoshin, Mikhaylo A Trunov, Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2006. “Ignition of aluminum-rich Al–Ti mechanical alloys in air.” Combustion and flame, vol. 144, no. 4, pp. 688–697.
Mikhaylo A Trunov, Swati Umbrajkar, Mirko Schoenitz, Joseph T Mang, Edward L Dreizin. 2006. “Melting and Oxidation of Nanometer Size Aluminum Powders.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 896, pp. 171.
L Gránásy, T Pusztai, T Börzsönyi, G Toth, G Tegze, JA Warren, JF Douglas, Mirko Schoenitz, Edward L Dreizin, I Gutierrez-Urrutia, others. 2006. “OUTSTANDING MEETING PAPER.” J. Mater. Res, vol. 21, no. 2, pp. 310.
Mikhaylo A Trunov, Swati M Umbrajkar, Mirko Schoenitz, Joseph T Mang, Edward L Dreizin. 2006. “Oxidation and melting of aluminum nanopowders.” The Journal of Physical Chemistry B, vol. 110, no. 26, pp. 13094–13099.
Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2006. “Oxidation of Mechanically Alloyed Al-rich Al–Ti Powders.” Oxidation of metals, vol. 65, no. 5-6, pp. 357–376.
Yuriy L Shoshin, Edward L Dreizin. 2006. “Particle combustion rates for mechanically alloyed Al–Ti and aluminum powders burning in air.” Combustion and flame, vol. 145, no. 4, pp. 714–722.
Xiaoying Zhu, Mirko Schoenitz, Vern K Hoffmann, Edward L Dreizin. 2006. “Reactive Al-Li Powders Prepared by Mechanical Alloying.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 896, pp. 39.
SM Umbrajkar, M Schoenitz, EL Dreizin. 2006. “Structural Refinement in Al-MoO 3 Nanocomposites Prepared by Arrested Reactive Milling.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 896, pp. 57.
Trent S Ward, Wenliang Chen, Mirko Schoenitz, Rajesh N. Dave, Edward L Dreizin. 2005. “A study of mechanical alloying processes using reactive milling and discrete element modeling.” Acta Materialia, vol. 53, no. 10, pp. 2909–2918.
Mirko Schoenitz, Trent Ward, Edward Dreizin. 2005. “Arrested Reactive Milling for In-Situ Production of Energetic Nanocomposites for Propulsion and Energy-Intensive Technologies in Exploration Missions.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Mirko Schoenitz, Xiaoying Zhu, Edward L Dreizin. 2005. “Carbide formation in Al–Ti mechanical alloys.” Scripta materialia, vol. 53, no. 9, pp. 1095–1099.
Mikhaylo A Trunov, Mirko Schoenitz, Xiaoying Zhu, Edward L Dreizin. 2005. “Effect of polymorphic phase transformations in Al< sub> 2 O< sub> 3 film on oxidation kinetics of aluminum powders.” Combustion and Flame, vol. 140, no. 4, pp. 310–318.
Swati M Umbrajkar, Mirko Schoenitz, Steven R Jones, Edward L Dreizin. 2005. “Effect of temperature on synthesis and properties of aluminum–magnesium mechanical alloys.” Journal of alloys and compounds, vol. 402, no. 1, pp. 70–77.
Mirko Schoenitz, Trent S Ward, Edward L Dreizin. 2005. “Fully dense nano-composite energetic powders prepared by arrested reactive milling.” Proceedings of the Combustion Institute, vol. 30, no. 2, pp. 2071–2078.
Mikhaylo A Trunov, Mirko Schoenitz, Edward L Dreizin. 2005. “Ignition of aluminum powders under different experimental conditions.” Propellants, Explosives, Pyrotechnics, vol. 30, no. 1, pp. 36–43.
W Chen, M Schoenitz, TS Ward, RN Dave, EL Dreizin. 2005. “Numerical simulation of mechanical alloying in a shaker mill by discrete element method.” KONA Powder Part, vol. 23, pp. 152–162.
Swati M Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2005. “Structural refinement in Al-MoO 3 nanocomposites prepared by arrested reactive milling.” Thadhani N, Armstrong RW, Gash AE, Wilson WH Materials Research Society Symposium Proceedings, vol. 896.
Swati Umbrajkar, Mirko Schoenitz, Edward L Dreizin. 2005. “Structural refinement in Al-MoO3 nanocomposites prepared by arrested reactive milling.” MRS Proceedings, vol. 896, pp. 0896–H02.
Binu Zacharia Eapen, VK Hoffmann, M Schoenitz, EL Dreizin. 2004. “Combustion of aerosolized spherical aluminum powders and flakes in air.” Combustion Science and Technology, vol. 176, no. 7, pp. 1055–1069.
Alexandre Ermoline, Mirko Schoenitz, VK Hoffmann, EL Dreizin. 2004. “Experimental technique for studying high-temperature phases in reactive molten metal based systems.” Review of scientific instruments, vol. 75, no. 12, pp. 5177–5185.
Yuriy Shoshin, Edward L Dreizin. 2004. “Laminar lifted flame speed measurements for aerosols of metals and mechanical alloys.” AIAA journal, vol. 42, no. 7, pp. 1416–1426.
Mirko Schoenitz, Xiaoying Zhu, Edward L Dreizin. 2004. “Mechanical alloys in the Al-rich part of the Al-Ti binary system.” Journal of Metastable and Nanocrystalline Materials, vol. 20, pp. 455–461.
Trent S Ward, Wenliang Chen, Mirko Schoenitz, E Dreizin, Rajesh N. Dave. 2004. “Nano-composite energetic powders prepared by arrested reactive milling.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Mirko Schoenitz, Edward L Dreizin. 2004. “Oxidation processes and phase changes in metastable Al-Mg alloys.” Journal of propulsion and power, vol. 20, no. 6, pp. 1064–1068.
Xiaoying Zhu, Mirko Schoenitz, Edward L Dreizin. 2004. “Oxidation Processes and Phase Changes in Metastable Al-Ti Mechanical Alloys.” MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, vol. 800, pp. 99–104.
Edward L Dreizin, Yuriy L Shoshin, Ruslan S Murdyy, Vern K Hoffmann. 2004. “Reaction mechanisms and particle interaction in burning two-phase systems.” .
Mirko Schoenitz, Edward L Dreizin, Emil Shtessel. 2003. “Constant volume explosions of aerosols of metallic mechanical alloys and powder blends.” Journal of propulsion and power, vol. 19, no. 3, pp. 405–412.
EL Dreizin. 2003. “Effect of Phase Changes on Metal-Particle Combustion Processes.” Combustion, Explosion and Shock Waves, vol. 39, no. 6, pp. 681–693.
E Dreizin, Y Shoshin. 2003. “Laminar lifted flame velocity measurements for aerosols of metals and mechanical alloys.” 41 st AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV.
Y Shoshin, E Dreizin. 2003. “Laminar lifted flame velocity measurements for aerosols of metals and mechanical alloys.” & Proceedings 저널 프로시딩즈| 기술보고서| 해외연구초록| Reference DB| 공학설계| 부품규격| 항공우주특허| 원문신청| 논문스크랩| 연구자 DB 해외개발| 국내개발| 우주기술전략지도| AIAA 연차보고서| 저널번역| 일본항공우주| 국내연구성과| IP 제공정보| 부품개발현황 ARIC 용어사전| 교육도서| 인물사건| Web Link| 항공 우주 Spec 항공우주기사| 학술행사안내| 과제 기관소식| 해외개발 소식| 뉴스레터 자유게시판| 오피니언| 실험실/업체 홍보| 갤러리.
Y Shoshin, E Dreizin. 2003. “Particle combustion rates in premixed flames of polydisperse metal—air aerosols.” Combustion and Flame, vol. 133, no. 3, pp. 275–287.
M Schoenitz, T Ward, EL Dreizin. 2003. “Preparation of energetic metastable nano-composite materials by arrested reactive milling.” MRS Proceedings, vol. 800, no. 1.
Mirko Schoenitz, Edward L Dreizin. 2003. “Structure and properties of Al-Mg mechanical alloys.” Journal of materials research, vol. 18, no. 8, pp. 1827–1836.
Edward L Dreizin, Yuriy L Shoshin, Ruslan S Mudryy, Vern K Hoffmann. 2002. “Constant pressure flames of aluminum and aluminum-magnesium mechanical alloy aerosols in microgravity.” Combustion and flame, vol. 130, no. 4, pp. 381–385.
Sukrut S Thipse, Edward L Dreizin. 2002. “Metal partitioning in products of incineration of municipal solid waste.” Chemosphere, vol. 46, no. 6, pp. 837–849.
Sukrut S Thipse, Mirko Schoenitz, Edward L Dreizin. 2002. “Morphology and composition of the fly ash particles produced in incineration of municipal solid waste.” Fuel processing technology, vol. 75, no. 3, pp. 173–184.
Yuriy L Shoshin, Ruslan S Mudryy, Edward L Dreizin. 2002. “Preparation and characterization of energetic Al-Mg mechanical alloy powders.” Combustion and Flame, vol. 128, no. 3, pp. 259–269.
Alexandre Ermoline, Mirko Schoenitz, Edward Dreizin, Nan Yao. 2002. “Production of carbon-coated aluminium nanopowders in pulsed microarc discharge.” Nanotechnology, vol. 13, no. 5, pp. 638.
Y Shoshin, E Dreizin. 2002. “Production of well-controlled laminar aerosol jets and their application for studying aerosol combustion processes.” Aerosol Science & Technology, vol. 36, no. 9, pp. 953–962.
M Schoenitz, Y Shoshin, R Mudryy, E Dreizin. 2001. “Characterization of Structure and Combustion Behavior of Metastable Al-Mg Mechanical Alloy Powders.” CHEMICAL AND PHYSICAL PROCESSES IN COMBUSTION, pp. 147–150.
SERGIO ROSSI, EDWARD L DREIZIN, CHUNG K LAW. 2001. “Combustion of aluminum particles in carbon dioxide.” Combustion science and technology, vol. 164, no. 1, pp. 209–237.
EL Dreizin, YL Shoshin, RS Mudryy. 2001. “High Energy Density Powders of the Al-Mg Mechanical Alloys.” 50 th JANNAF Propulsion Meeting, vol. 1.
A Ermoline, Y Shoshin, E Dreizin. 2001. “Production of Coated Aluminum Nanopowders in Pulsed Microarc Discharge.” CHEMICAL AND PHYSICAL PROCESSES IN COMBUSTION, pp. 288–291.
Y Shoshin, E Dreizin. 2001. “Radiation Intensity Profiles of Premixed Flames of Polydisperse Metal-Air Aerosol.” CHEMICAL AND PHYSICAL PROCESSES IN COMBUSTION, pp. 408–411.
Sukrut S Thipse, Chad Sheng, Michael R. Booty, Richard S Magee, Edward L Dreizin. 2001. “Synthetic fuel for imitation of municipal solid waste in experimental studies of waste incineration.” Chemosphere, vol. 44, no. 5, pp. 1071–1077.
Edward L Dreizin, Charles H Berman, Edward P Vicenzi. 2000. “Condensed-phase modifications in magnesium particle combustion in air.” Combustion and flame, vol. 122, no. 1, pp. 30–42.
Edward L Dreizin, Vern K Hoffmann. 2000. “Experiments on magnesium aerosol combustion in microgravity.” Combustion and flame, vol. 122, no. 1, pp. 20–29.
S Candel, HH Chiu, K Dam-Johansen, EL Dreizin, D Drysdale, EG Eddings, FJ Frandsen, BE Gelfand, G Grant, EU Hartge, others. 2000. “Loth, E. 161.” .
EL Dreizin. 2000. “Phase changes in metal combustion.” Progress in Energy and Combustion Science, vol. 26, no. 1, pp. 57–78.
EL Dreizin, CH Berman, VK Hoffman, EP Vicenzi. 1999. “Combustion of aerosolized metal particles in microgravity.” .
Edward L Dreizin, Vern K Hoffmann. 1999. “Constant pressure combustion of aerosol of coarse magnesium particles in microgravity.” Combustion and flame, vol. 118, no. 1, pp. 262–280.
Edward L Dreizin. 1999. “Experimental study of aluminum particle flame evolution in normal and micro-gravity.” Combustion and Flame, vol. 116, no. 3, pp. 323–333.
Edward L Dreizin, Vern K Hoffmann, Edward P Vicenzi. 1999. “High-temperature phases in ternary Zr–O–N systems.” Journal of materials research, vol. 14, no. 10, pp. 3840–3842.
EL Dreizin. 1999. “Internal Heterogeneous Processes in Aluminum Combustion.” .
Edward L Dreizin. 1999. “On the mechanism of asymmetric aluminum particle combustion.” Combustion and Flame, vol. 117, no. 4, pp. 841–850.
EL Dreizin, DG Keil, W Felder, EP Vicenzi. 1999. “Phase changes in boron ignition and combustion.” Combustion and flame, vol. 119, no. 3, pp. 272–290.
IE Molodetsky, EP Vicenzi, EL Dreizin, CK Law. 1998. “Phases of titanium combustion in air.” Combustion and flame, vol. 112, no. 4, pp. 522–532.
Edward L Dreizin. 1997. “Interaction of burning metal particles.” Fourth Inter. Microg. Comb. Workshop. NASA CP–10194, pp. 55–62.
Edward L Dreizin. 1997. “Interaction of burning metal particles.” .
Edward L Dreizin. 1997. “Internal and Surface Phenomena in Heterogenous Metal Combustion.” .
DG Keil, EL Dreizin, W Felder, EP Vicenzi. 1997. “On the Mechanism of Boron Ignition.” .
CH Berman, OP Andersen, EL Dreizin. 1996. “Enhanced Mixing and Noise Reduction by Auxiliary Jets.” ASME-PUBLICATIONS-FED, vol. 237, pp. 491–496.
IE Molodetsky, EL Dreizin, CK Law. 1996. “Evolution of particle temperature and internal composition for zirconium burning in air.” Symposium (International) on Combustion, vol. 26, no. 2, pp. 1919–1927.
Edward L Dreizin. 1996. “Experimental study of stages in aluminium particle combustion in air.” Combustion and Flame, vol. 105, no. 4, pp. 541–556.
IE Molodetsky, EL Dreizin. 1996. “High-temperature oxygen dissolution in liquid zirconium.” Materials Research Society Symposium Proceedings, vol. 418, pp. 195–200.
EL Dreizin, HF Calcote. 1995. “A New Mechanism of Boron Ignition: Through the Formation of a Saturated BO Solution.” CHEMICAL AND PHYSICAL PROCESSES IN COMBUSTION, pp. 333–336.
Edward L Dreizin, Irina E Molodetsky, Chung K Law. 1995. “Internal and surface phenomena in metal combustion.” NASA. Lewis Research Center, The 3 rd International Microgravity Combustion Workshop p 129-134(SEE N 96-15552 03-29).
Edward L Dreizin, Michael A Trunov. 1995. “Surface phenomena in aluminum combustion.” Combustion and flame, vol. 101, no. 3, pp. 378–382.
Edward L Dreizin. 1994. “Uniform Solid and Hollow Metal Spheres: Formation in a Pulsed Micro-Arc and Applications.” MRS Proceedings, vol. 372, no. 1.
Edward Dreizin, Mihail Trunov. 1993. “Formation of a high-current pulsed gas discharge as a source of highly concentrated energy flux to treat metal surfaces.” Plasma Science, IEEE Transactions on, vol. 21, no. 6, pp. 619–624.
AV Suslov, EL Dreizin, MA Trunov. 1993. “Formation of monodisperse refractory metal particles by impulse discharge.” Powder technology, vol. 74, no. 1, pp. 23–30.
EL Dreizin, AV Suslov, MA Trunov. 1993. “General trends in metal particles heterogeneous combustion.” Combustion science and technology, vol. 90, no. 1-4, pp. 79–99.
EL Dreizin, AV Suslov, MA Trunov. 1993. “Temperature jumps in free metal particle combustion.” Combustion science and technology, vol. 87, no. 1-6, pp. 45–58.
AV Suslov, EL Dreizin, MA Trunov. 1991. “Aerodynamic resistance to the movement ofhigh-temperature metal particles.” Journal of Aerosol Science, vol. 22, pp. S281–S284.
AV Suslov, ÉL Dreizin, MA Trunov. 1991. “Behavior of monodispersed metal particles in various media.” Journal of Engineering Physics and Thermophysics, vol. 60, no. 4, pp. 472–476.
AV Suslov, EL Dreizin, M Trunov. 1991. “Behaviour of Metal Monodisperse Particles in Different Media.” Inzhenerno-Fizicheskii Zhurnal(USSR), vol. 60, no. 4, pp. 620–625.
AV Suslov, EL Dreizin, MA Trunov. 1991. “Interaction of high temperature metal particleswith different materials.” Journal of Aerosol Science, vol. 22, pp. S277–S280.
AV Suslov, ÉL Dreizin, MA Trunov. 1991. “Investigation of the properties of monodispersed microgranules of refractory metals prepared in a pulsed arc.” Journal of engineering physics, vol. 60, no. 4, pp. 451–454.
AV Suslov, EL Dreizin, M Trunov. 1991. “Study of Properties of Monodisperse Microgranules of Fire-Proof Metals Produced in a Pulse Arc.” Inzhenerno-Fizicheskii Zhurnal(USSR), vol. 60, no. 4, pp. 595–599.
Valery Sinditskii, Viacheslav Egorshev, Valery Serushkin, Sergey Filatov, Anton Chernyi, Jan Puszynski, Shasha Zhang, Mirko Schoenitz, Edward L Dreizin, Keiichi Hori, others. 1991. “Voce tem acesso a.” International Journal, vol. 1.
AV Suslov, EL Dreizin. 1990. “Producing monodisperse metallic powders in a pulsed electric arc.” Powder Metallurgy and Metal Ceramics, vol. 29, no. 12, pp. 939–943.
AV Suslov, EL Dreizin. 1990. “Production of monodisperse metal powders in pulse electric arc.” Poroshkovaya Metallurgiya, no. 12, pp. 1–5.
AV Suslov, EL Dreizin, MA Trunov. 1990. “Study of combustion of monodisperse metallic particles produced by impulse arc.” Combustion, Explosion, and Shock Waves, vol. 26, no. 4, pp. 394–396.
DY Cheng, RE Dannenberg. 1971. “Dark-pause measurements in a high-pressure arc discharge.” AIAA Journal, vol. 9, no. 1, pp. 184–186.
COLLAPSE
Conference Proceeding
“Comparison of numerical simulations of inert particle transport in an electrostatic discharge with experimental results”
2020.
“Ignition of Reactive Material Powders in Vicinity of an Electrostatic Discharge”
2019.
“Influence of Catalyst on the Mechanochemical Nitration of Toluene”
2019.
“Spherical Composite Powders As Feedstock for Additive Manufacturing”
2019.
“Combustion of boron in products of an air-acetylene pre-mixed flame”
January (1st Quarter/Winter) 2016.
2020.
“Ignition of Reactive Material Powders in Vicinity of an Electrostatic Discharge”
2019.
“Influence of Catalyst on the Mechanochemical Nitration of Toluene”
2019.
“Spherical Composite Powders As Feedstock for Additive Manufacturing”
2019.
“Combustion of boron in products of an air-acetylene pre-mixed flame”
January (1st Quarter/Winter) 2016.
SHOW MORE
“Composite B·Mg powders prepared by mechanical milling”
January (1st Quarter/Winter) 2016.
“ESD stimulated ignition of metal powders”
2010.
“Oxidation of aluminum powders at high heating rates”
Central States Section of the Combustion Institute 2010 Technical Meeting , March 2010.
“Preparation and characterization of consolidated samples of reactive nanocomposite materials”
Central States Section of the Combustion Institute 2010 Technical Meeting , March 2010.
“Reactions leading to ignition in nanocomposite Al-oxide systems”
Central States Section of the Combustion Institute 2010 Technical Meeting , March 2010.
“Characteristics of Metal Combustion Obtained from Constant Volume Explosion Experiments. ”
AIAA-2010-0178; 48th AIAA Aerospace Sciences Meeting, January (1st Quarter/Winter) 2010.
“Characterization of Fine Aluminum Powder Coated with Nickel as a Potential Fuel Additive. ”
AIAA-2010-0619, 48th AIAA Aerospace Sciences Meeting, January (1st Quarter/Winter) 2010.
“Preparation and Characterization Al- I Nanocomposite Powders as Fuel Additives with Biocidal Combustion Products”
AIAA-2010-0618, 48th AIAA Aerospace Sciences Meeting., January (1st Quarter/Winter) 2010.
“Characterization of fine aluminum powder coated with nickel as a potential fuel additive.”
2009 Fall Technical Meeting of the Eastern States Section of the Combustion Institute. , October (4th Quarter/Autumn) 2009.
“Ignition kinetics and burn rates of Al particles”
2009 Fall Technical Meeting of the Eastern States Section of the Combustion Institute., October (4th Quarter/Autumn) 2009.
“Ignition of Aluminum Powders by Electro-Static Discharge”
Fall Technical Meeting of the Eastern States Section of the Combustion Institute. , October (4th Quarter/Autumn) 2009.
January (1st Quarter/Winter) 2016.
“ESD stimulated ignition of metal powders”
2010.
“Oxidation of aluminum powders at high heating rates”
Central States Section of the Combustion Institute 2010 Technical Meeting , March 2010.
“Preparation and characterization of consolidated samples of reactive nanocomposite materials”
Central States Section of the Combustion Institute 2010 Technical Meeting , March 2010.
“Reactions leading to ignition in nanocomposite Al-oxide systems”
Central States Section of the Combustion Institute 2010 Technical Meeting , March 2010.
“Characteristics of Metal Combustion Obtained from Constant Volume Explosion Experiments. ”
AIAA-2010-0178; 48th AIAA Aerospace Sciences Meeting, January (1st Quarter/Winter) 2010.
“Characterization of Fine Aluminum Powder Coated with Nickel as a Potential Fuel Additive. ”
AIAA-2010-0619, 48th AIAA Aerospace Sciences Meeting, January (1st Quarter/Winter) 2010.
“Preparation and Characterization Al- I Nanocomposite Powders as Fuel Additives with Biocidal Combustion Products”
AIAA-2010-0618, 48th AIAA Aerospace Sciences Meeting., January (1st Quarter/Winter) 2010.
“Characterization of fine aluminum powder coated with nickel as a potential fuel additive.”
2009 Fall Technical Meeting of the Eastern States Section of the Combustion Institute. , October (4th Quarter/Autumn) 2009.
“Ignition kinetics and burn rates of Al particles”
2009 Fall Technical Meeting of the Eastern States Section of the Combustion Institute., October (4th Quarter/Autumn) 2009.
“Ignition of Aluminum Powders by Electro-Static Discharge”
Fall Technical Meeting of the Eastern States Section of the Combustion Institute. , October (4th Quarter/Autumn) 2009.
COLLAPSE
Technical Report
“Reactive Materials with Burn Rate Adjusted by Initiation Method”
New Jersey Institute of Technology Newark United States, 2020.
“Mechanochemical Preparation of Organic Nitro Compounds”
New Jersey Institute of Technology University Heights United States, 2018.
“Combustion Dynamics of Biocidal Metal-Based Energetic Components in Turbulent Reactive Flows”
ILLINOIS UNIV AT URBANA-CHAMPAIGN DEPT OF MECHANICAL SCIENCE AND ENGINEERING, 2015.
“Mechanism of Electro-Static Discharge (ESD) Sensitivity of Reactive Powders and Its Mitigation”
DTIC Document, 2011.
“Mechanistic Models for Ignition and Combustion of Metallic Powders in Different Environments”
NEW JERSEY INST OF TECH NEWARK DEPT OF CHEMICAL BIOLOGICAL AND PHARMACEUTICAL ENGINEERING, 2010.
New Jersey Institute of Technology Newark United States, 2020.
“Mechanochemical Preparation of Organic Nitro Compounds”
New Jersey Institute of Technology University Heights United States, 2018.
“Combustion Dynamics of Biocidal Metal-Based Energetic Components in Turbulent Reactive Flows”
ILLINOIS UNIV AT URBANA-CHAMPAIGN DEPT OF MECHANICAL SCIENCE AND ENGINEERING, 2015.
“Mechanism of Electro-Static Discharge (ESD) Sensitivity of Reactive Powders and Its Mitigation”
DTIC Document, 2011.
“Mechanistic Models for Ignition and Combustion of Metallic Powders in Different Environments”
NEW JERSEY INST OF TECH NEWARK DEPT OF CHEMICAL BIOLOGICAL AND PHARMACEUTICAL ENGINEERING, 2010.
SHOW MORE
“Solid Propellant Burn Rate Modifiers Based on Reactive Nanocomposite Materials”
DTIC Document, 2010.
“Aluminum Burn Rate Modifiers Based on Reactive Nanocomposite Powders (Preprint)”
DTIC Document, 2009.
“High Energy Metallic Mechanical Alloys for New Explosives and Incendiary Devices with Controllable Explosion Parameters”
DTIC Document, 2001.
“Atmospheric pressure glow discharge for enhanced combustion. Final report, November 1993-April 1995”
AeroChem Research Labs., Princeton, NJ (United States), 1995.
DTIC Document, 2010.
“Aluminum Burn Rate Modifiers Based on Reactive Nanocomposite Powders (Preprint)”
DTIC Document, 2009.
“High Energy Metallic Mechanical Alloys for New Explosives and Incendiary Devices with Controllable Explosion Parameters”
DTIC Document, 2001.
“Atmospheric pressure glow discharge for enhanced combustion. Final report, November 1993-April 1995”
AeroChem Research Labs., Princeton, NJ (United States), 1995.
COLLAPSE
Other
“Inactivation of Aerosolized Biological Agents using Filled Nanocomposite Materials”
CINCINNATI UNIV OH, 2013.
“Aluminum Burn Rate Modifiers Based on Reactive Nanocomposite Powders (Preprint)”
REACTIVE METALS EDISON NJ, 2009.
“Nano-composite energetic powders prepared by arrested reactive milling”
Google Patents, April (2nd Quarter/Spring) 2009.
“Process and apparatus for micro-arc welding”
Google Patents, April (2nd Quarter/Spring) 1997.
CINCINNATI UNIV OH, 2013.
“Aluminum Burn Rate Modifiers Based on Reactive Nanocomposite Powders (Preprint)”
REACTIVE METALS EDISON NJ, 2009.
“Nano-composite energetic powders prepared by arrested reactive milling”
Google Patents, April (2nd Quarter/Spring) 2009.
“Process and apparatus for micro-arc welding”
Google Patents, April (2nd Quarter/Spring) 1997.